Program for digitally controlled height adjustmend of planer table
Required libraries:
- Keypad: https://playground.arduino.cc/uploads/Code/keypad/index.zip
- AccelStepper: https://www.airspayce.com/mikem/arduino/AccelStepper/index.html
- LED Backpack: https://github.com/adafruit/Adafruit_LED_Backpack
Required hardware:
- Arduino Uno or Mega Board
- Stepper motor with 2-3 Nm
- Stepper driver
- Two 7 segment LED HT16K33 Backpacks with 4 digits and decimal points
- 4x4 Number Keypad
- At least one momentary switch for homing