DPL web UI: add hint to setting "inverter behind power meter"

helgeerbe · May 9, 2024 · edf493b · edf493b
1 parent ca3d1da
commit edf493b
Show file tree

Hide file tree

Showing 4 changed files with 5 additions and 1 deletion.
diff --git a/webapp/src/locales/de.json b/webapp/src/locales/de.json
@@ -631,7 +631,8 @@
         "VoltageSolarPassthroughStopThreshold": "Full-Solar-Passthrough Stop-Schwellwert",
         "VoltageLoadCorrectionFactor": "Lastkorrekturfaktor",
         "BatterySocInfo": "<b>Hinweis:</b> Die Akku SoC (State of Charge) Werte werden nur benutzt, wenn die Batterie-Kommunikationsschnittstelle innerhalb der letzten Minute gültige Werte geschickt hat. Andernfalls werden als Fallback-Option die Spannungseinstellungen verwendet.",
-        "InverterIsBehindPowerMeter": "Stromzählermessung beinhaltet Wechselrichterleistung",
+        "InverterIsBehindPowerMeter": "Stromzählermessung beinhaltet Wechselrichter",
+        "InverterIsBehindPowerMeterHint": "Aktivieren falls sich der Stromzähler-Messwert um die Ausgangsleistung des Wechselrichters verringert, wenn dieser Strom produziert. Normalerweise ist das zutreffend.",
         "InverterIsSolarPowered": "Wechselrichter wird von Solarmodulen gespeist",
         "VoltageThresholds": "Batterie Spannungs-Schwellwerte ",
         "VoltageLoadCorrectionInfo": "<b>Hinweis:</b> Wenn Leistung von der Batterie abgegeben wird, bricht ihre Spannung etwas ein. Der Spannungseinbruch skaliert mit dem Entladestrom. Damit nicht vorzeitig der Wechselrichter ausgeschaltet wird sobald der Stop-Schwellenwert unterschritten wurde, wird der hier angegebene Korrekturfaktor mit einberechnet um die Spannung zu errechnen die der Akku in Ruhe hätte. Korrigierte Spannung = DC Spannung + (Aktuelle Leistung (W) * Korrekturfaktor).",

diff --git a/webapp/src/locales/en.json b/webapp/src/locales/en.json
@@ -638,6 +638,7 @@
         "VoltageLoadCorrectionFactor": "Load correction factor",
         "BatterySocInfo": "<b>Hint:</b> The battery SoC (State of Charge) values are only used if the battery communication interface reported SoC updates in the last minute. Otherwise the voltage thresholds will be used as fallback.",
         "InverterIsBehindPowerMeter": "PowerMeter reading includes inverter output",
+        "InverterIsBehindPowerMeterHint": "Enable this option if the power meter reading is reduced by the inverter's output when it produces power. This is typically true.",
         "InverterIsSolarPowered": "Inverter is powered by solar modules",
         "VoltageThresholds": "Battery Voltage Thresholds",
         "VoltageLoadCorrectionInfo": "<b>Hint:</b> When the battery is discharged, its voltage drops. The voltage drop scales with the discharge current. In order to not stop the inverter too early (stop threshold), this load correction factor can be specified to calculate the battery voltage if it was idle. Corrected voltage = DC Voltage + (Current power * correction factor).",

diff --git a/webapp/src/locales/fr.json b/webapp/src/locales/fr.json
@@ -714,6 +714,7 @@
       "VoltageLoadCorrectionFactor": "Load correction factor",
       "BatterySocInfo": "<b>Hint:</b> The battery SoC (State of Charge) values are only used if the battery communication interface reported SoC updates in the last minute. Otherwise the voltage thresholds will be used as fallback.",
       "InverterIsBehindPowerMeter": "PowerMeter reading includes inverter output",
+      "InverterIsBehindPowerMeterHint": "Enable this option if the power meter reading is reduced by the inverter's output when it produces power. This is typically true.",
       "InverterIsSolarPowered": "Inverter is powered by solar modules",
       "VoltageThresholds": "Battery Voltage Thresholds",
       "VoltageLoadCorrectionInfo": "<b>Hint:</b> When the battery is discharged, its voltage drops. The voltage drop scales with the discharge current. In order to not stop the inverter too early (stop threshold), this load correction factor can be specified to calculate the battery voltage if it was idle. Corrected voltage = DC Voltage + (Current power * correction factor)."

diff --git a/webapp/src/views/PowerLimiterAdminView.vue b/webapp/src/views/PowerLimiterAdminView.vue
@@ -102,6 +102,7 @@
                 <InputElement v-show="hasPowerMeter()"
                               :label="$t('powerlimiteradmin.InverterIsBehindPowerMeter')"
                               v-model="powerLimiterConfigList.is_inverter_behind_powermeter"
+                              :tooltip="$t('powerlimiteradmin.InverterIsBehindPowerMeterHint')"
                               type="checkbox" wide/>
 
                 <div class="row mb-3" v-if="!powerLimiterConfigList.is_inverter_solar_powered">