Nach MQTT aktivierung OpenDTU nicht erreichbar. #183
-
Hi, Leute! Was mache ich falsch, gestern eine aktuelle version geflasht (545a18d) und seit dem bringe ich den Dynamic Power Limiter nicht zum Laufen. Sobald ich Mqtt aktiviere wird das OpenDTU sehr langsam und dann nicht erreichbar. IoBroker log
OpenDTU log `Connected to MQTT. Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/limit_online_voltage Limit Voltage: 0.000000 V Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled. Core 1 register dump: PC : 0x401ccf37 PS : 0x00060230 A0 : 0x8010dfaf A1 : 0x3ffd8720 A2 : 0x00000000 A3 : 0x108180fe A4 : 0x00000000 A5 : 0x00000001 A6 : 0x00000008 A7 : 0x3ffd8764 A8 : 0x800d8c88 A9 : 0x3ffd8690 A10 : 0x00000001 A11 : 0x0000000a A12 : 0x00000000 A13 : 0x00000000 A14 : 0x3ffbb1b0 A15 : 0x00000000 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000004 LBEG : 0x4008c06d LEND : 0x4008c07d LCOUNT : 0xffffffff Backtrace: 0x401ccf34:0x3ffd8720 0x4010dfac:0x3ffd8740 0x400d862e:0x3ffd8760 0x400dc3e6:0x3ffd8790 0x401cb62d:0x3ffd88f0 0x4011e39b:0x3ffd8920 0x400de4a2:0x3ffd8980 0x401cb6dd:0x3ffd89b0 0x40109ce5:0x3ffd89e0 0x4010a533:0x3ffd8ad0 0x4010a6af:0x3ffd8b10 0x4010a74d:0x3ffd8b40 ELF file SHA256: 15f94b9d4a73bab1 E (4475) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:13192 load:0x40080400,len:3028 entry 0x400805e4 E (679) esp_core_dump_flash: No core du极partition found! E (679) esp_core_dump_flash: No core dump partition found! Starting OpenDTU Initialize FS... done Reading configuration... done Reading PinMapping... [ 194][E][vfs_api.cpp:105] open(): /littlefs/pin_mapping.json does not exist, no permits for creation using default config done Initialize Network... done Setting Hostname... Configuring WiFi STA using new credentials... done Initialize NTP... done Initialize SunPosition... done Initialize MqTT... done Initialize WebApi... WiFi disconnected done Initialize Display... done Initialize LEDs... done Check for default DTU serial... done done Initialize Hoymiles interface... NRF: Connection successful Setting radio PA level... Setting DTU serial... Setting poll interval... Adding inverter: 116173708786 - HM1500 done done Initialize ve.direct interface... ve.direct rx = 22, tx = 21 done Initialize Pylontech battery interface... Pylontech Battery rx = 27, tx = 14 done Initialize Huawei AC charger interface... Huawei AC-charger miso = 12, mosi = 13, clk = 26, irq = 25, cs = 15, power_pin = 33 done Switch to WiFi mode WiFi connected Setting Hostname... done Configuring WiFi STA using existing credentials... done Configuring WiFi STA DHCP IP... done WiFi got ip: 192.168.2.96 Network connected Connecting to MQTT... Connected to MQTT. Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/limit_online_voltage Limit Voltage: 0.000000 V Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled. Core 1 register dump: PC : 0x401ccf37 PS : 0x00060230 A0 : 0x8010dfaf A1 : 0x3ffd8720 A2 : 0x00000000 A3 : 0x108180fe A4 : 0x00000000 A5 : 0x00000001 A6 : 0x00000008 A7 : 0x3ffd8764 A8 : 0x800d8c88 A9 : 0x3ffd8690 A10 : 0x00000001 A11 : 0x0000000a A12 : 0x00000000 A13 : 0x00000000 A14 : 0x3ffbb1b0 A15 : 0x00000000 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000004 LBEG : 0x4008c06d LEND : 0x4008c07d LCOUNT : 0xffffffff Backtrace: 0x401ccf34:0x3ffd8720 0x4010dfac:0x3ffd8740 0x400d862e:0x3ffd8760 0x400dc3e6:0x3ffd8790 0x401cb62d:0x3ffd88f0 0x4011e39b:0x3ffd8920 0x400de4a2:0x3ffd8980 0x401cb6dd:0x3ffd89b0 0x40109ce5:0x3ffd89e0 0x4010a533:0x3ffd8ad0 0x4010a6af:0x3ffd8b10 0x4010a74d:0x3ffd8b40 ELF file SHA256: 15f94b9d4a73bab1 E (3982) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:13192 load:0x40080400,len:3028 entry 0x400805e4 E (679) esp_core_dump_flash: No core du极partition found! E (679) esp_core_dump_flash: No core dump partition found! Starting OpenDTU Initialize FS... done Reading configuration... done Reading PinMapping... [ 194][E][vfs_api.cpp:105] open(): /littlefs/pin_mapping.json does not exist, no permits for creation using default config done Initialize Network... done Setting Hostname... Configuring WiFi STA using new credentials... done Initialize NTP... done Initialize SunPosition... done Initialize MqTT... done Initialize WebApi... done Initialize Display... done Initialize LEDs... done Check for default DTU serial... done done Initialize Hoymiles interface... NRF: Connection successful Setting radio PA level... Setting DTU serial... Setting poll interval... Adding inverter: 116173708786 - HM1500 done done Initialize ve.direct interface... ve.direct rx = 22, tx = 21 done Initialize Pylontech battery interface... Pylontech Battery rx = 27, tx = 14 done Initialize Huawei AC charger interface... Huawei AC-charger miso = 12, mosi = 13, clk = 26, irq = 25, cs = 15, pWiFi disconnected ower_pin = 33 done Switch to WiFi mode Setting Hostname... done Configuring WiFi STA using new credentials... done Configuring WiFi STA DHCP IP... E (1399) wifi:sta is connecting, return error [ 483][E][WiFiSTA.cpp:317] begin(): connect failed! 0x3007 WiFi disconnected Try reconnecting Network lost connection WiFi disconnected Try reconnecting done Network lost connection WiFi connected WiFi got ip: 192.168.2.96 Network connected Connecting to MQTT... Connected to MQTT. Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/limit_online_voltage Limit Voltage: 0.000000 V Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled. Core 1 register dump: PC : 0x401ccf37 PS : 0x00060230 A0 : 0x8010dfaf A1 : 0x3ffd8720 A2 : 0x00000000 A3 : 0x108180fe A4 : 0x00000000 A5 : 0x00000001 A6 : 0x00000008 A7 : 0x3ffd8764 A8 : 0x800d8c88 A9 : 0x3ffd8690 A10 : 0x00000001 A11 : 0x0000000a A12 : 0x00000000 A13 : 0x00000000 A14 : 0x3ffbb1b0 A15 : 0x00000000 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000004 LBEG : 0x4008c06d LEND : 0x4008c07d LCOUNT : 0xffffffff Backtrace: 0x401ccf34:0x3ffd8720 0x4010dfac:0x3ffd8740 0x400d862e:0x3ffd8760 0x400dc3e6:0x3ffd8790 0x401cb62d:0x3ffd88f0 0x4011e39b:0x3ffd8920 0x400de4a2:0x3ffd8980 0x401cb6dd:0x3ffd89b0 0x40109ce5:0x3ffd89e0 0x4010a533:0x3ffd8ad0 0x4010a6af:0x3ffd8b10 0x4010a74d:0x3ffd8b40 ELF file SHA256: 15f94b9d4a73bab1 E (2888) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:13192 load:0x40080400,len:3028 entry 0x400805e4 E (679) esp_core_dump_flash: No core du极partition found! E (679) esp_core_dump_flash: No core dump partition found! Starting OpenDTU Initialize FS... done Reading configuration... done Reading PinMapping... [ 194][E][vfs_api.cpp:105] open(): /littlefs/pin_mapping.json does not exist, no permits for creation using default config done Initialize Network... done Setting Hostname... Configuring WiFi STA using new credentials... done Initialize NTP... done Initialize SunPosition... done Initialize MqTT... done Initialize WebApi... done Initialize Display... done Initialize LEDs... done Check for default DTU serial... done done Initialize Hoymiles interface... NRF: Connection successful Setting radio PA level... Setting DTU serial... Setting poll interval... Adding inverter: 116173708786 - HM1500 done done Initialize ve.direct interface... ve.direct rx = 22, tx = 21 done Initialize Pylontech battery interface... Pylontech Battery rx = 27, tx = 14 done Initialize Huawei AC charger interface... Huawei AC-charger miso = 12, mosi = 13, clk = 26, irq = 25, cs = 15, power_pin = 33 done Switch to WiFi mode WiFi disconnected Try reconnecting Network lost connection Setting Hostname... done Configuring WiFi STA using new credentials... done Configuring WiFi STA DHCP IP... E (1397) wifi:sta is connecting, return error [ 482][E][WiFiSTA.cpp:317] begin(): connect failed! 0x3007 WiFi disconnected Try reconnecting Network lost connection done WiFi disconnected Try reconnecting Network lost connection WiFi connected WiFi got ip: 192.168.2.96 Network connected Connecting to MQTT... Connected to MQTT. Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/limit_online_voltage Limit Voltage: 0.000000 V Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled. Core 1 register dump: PC : 0x401ccf37 PS : 0x00060230 A0 : 0x8010dfaf A1 : 0x3ffd86a0 A2 : 0x00000000 A3 : 0x108180fe A4 : 0x00000000 A5 : 0x00000001 A6 : 0x00000008 A7 : 0x3ffd86e4 A8 : 0x800d8c88 A9 : 0x3ffd8610 A10 : 0x00000001 A11 : 0x0000000a A12 : 0x00000000 A13 : 0x00000000 A14 : 0x3ffbb1b0 A15 : 0x00000000 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000004 LBEG : 0x4008c06d LEND : 0x4008c07d LCOUNT : 0xffffffff Backtrace: 0x401ccf34:0x3ffd86a0 0x4010dfac:0x3ffd86c0 0x400d862e:0x3ffd86e0 0x400dc3e6:0x3ffd8710 0x401cb62d:0x3ffd8870 0x4011e39b:0x3ffd88a0 0x400de4a2:0x3ffd8900 0x401cb6dd:0x3ffd8930 0x40109ce5:0x3ffd8960 0x4010a533:0x3ffd8a50 0x4010a6af:0x3ffd8a90 0x4010a74d:0x3ffd8ac0 ELF file SHA256: 15f94b9d4a73bab1 E (2876) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:13192 load:0x40080400,len:3028 entry 0x400805e4 E (679) esp_core_dump_flash: No core du极partition found! E (679) esp_core_dump_flash: No core dump partition found! Starting OpenDTU Initialize FS... done Reading configuration... done Reading PinMapping... [ 194][E][vfs_api.cpp:105] open(): /littlefs/pin_mapping.json does not exist, no permits for creation using default config done Initialize Network... done Setting Hostname... Configuring WiFi STA using new credentials... done Initialize NTP... done Initialize SunPosition... done Initialize MqTT... done Initialize WebApi... WiFi disconnected done Initialize Display... done Initialize LEDs... done Check for default DTU serial... done done Initialize Hoymiles interface... NRF: Connection successful Setting radio PA level... Setting DTU serial... Setting poll interval... Adding inverter: 116173708786 - HM1500 done done Initialize ve.direct interface... ve.direct rx = 22, tx = 21 done Initialize Pylontech battery interface... Pylontech Battery rx = 27, tx = 14 done Initialize Huawei AC charger interface... Huawei AC-charger miso = 12, mosi = 13, clk = 26, irq = 25, cs = 15, power_pin = 33 done Switch to WiFi mode WiFi connected Setting Hostname... done Configuring WiFi STA using existing credentials... done Configuring WiFi STA DHCP IP... done WiFi got ip: 192.168.2.96 Network connected Connecting to MQTT... Connected to MQTT. Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/limit_online_voltage Limit Voltage: 0.000000 V Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled. Core 1 register dump: PC : 0x401ccf37 PS : 0x00060230 A0 : 0x8010dfaf A1 : 0x3ffd86a0 A2 : 0x00000000 A3 : 0x108180fe A4 : 0x00000000 A5 : 0x00000001 A6 : 0x00000008 A7 : 0x3ffd86e4 A8 : 0x800d8c88 A9 : 0x3ffd8610 A10 : 0x00000001 A11 : 0x0000000a A12 : 0x00000000 A13 : 0x00000000 A14 : 0x3ffbb1b0 A15 : 0x00000000 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000004 LBEG : 0x4008c06d LEND : 0x4008c07d LCOUNT : 0xffffffff Backtrace: 0x401ccf34:0x3ffd86a0 0x4010dfac:0x3ffd86c0 0x400d862e:0x3ffd86e0 0x400dc3e6:0x3ffd8710 0x401cb62d:0x3ffd8870 0x4011e39b:0x3ffd88a0 0x400de4a2:0x3ffd8900 0x401cb6dd:0x3ffd8930 0x40109ce5:0x3ffd8960 0x4010a533:0x3ffd8a50 0x4010a6af:0x3ffd8a90 0x4010a74d:0x3ffd8ac0 ELF file SHA256: 15f94b9d4a73bab1 E (4096) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:13192 load:0x40080400,len:3028 entry 0x400805e4 E (679) esp_core_dump_flash: No core du极partition found! E (679) esp_core_dump_flash: No core dump partition found! Starting OpenDTU Initialize FS... done Reading configuration... done Reading PinMapping... [ 194][E][vfs_api.cpp:105] open(): /littlefs/pin_mapping.json does not exist, no permits for creation using default config done Initialize Network... done Setting Hostname... Configuring WiFi STA using new credentials... done Initialize NTP... done Initialize SunPosition... done Initialize MqTT... done Initialize WebApi... WiFi disconnected done Initialize Display... done Initialize LEDs... done Check for default DTU serial... done done Initialize Hoymiles interface... NRF: Connection successful Setting radio PA level... Setting DTU serial... Setting poll interval... Adding inverter: 116173708786 - HM1500 done done Initialize ve.direct interface... ve.direct rx = 22, tx = 21 done Initialize Pylontech battery interface... Pylontech Battery rx = 27, tx = 14 done Initialize Huawei AC charger interface... Huawei AC-charger miso = 12, mosi = 13, clk = 26, irq = 25, cs = 15, power_pin = 33 done Switch to WiFi mode WiFi connected Setting Hostname... done Configuring WiFi STA using existing credentials... done Configuring WiFi STA DHCP IP... done WiFi got ip: 192.168.2.96 Network connected Connecting to MQTT... Connected to MQTT. Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/power Inverter not found Power: 0.000000 A Received MQTT message on topic: balkonkraftwerk/huawei/cmd/limit_online_voltage Limit Voltage: 0.000000 V Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled. Core 1 register dump: PC : 0x401ccf37 PS : 0x00060730 A0 : 0x8010dfaf A1 : 0x3ffd86a0 A2 : 0x00000000 A3 : 0x108180fe A4 : 0x00000000 A5 : 0x00000001 A6 : 0x00000008 A7 : 0x3ffd86e4 A8 : 0x00060523 A9 : 0x80000000 A10 : 0x007bf5b8 A11 : 0x003fffff A12 : 0x8008436f A13 : 0x3ffb21a0 A14 : 0x00000001 A15 : 0x3ffd7760 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000004 LBEG : 0x4008c06d LEND : 0x4008c07d LCOUNT : 0xffffffff Backtrace: 0x401ccf34:0x3ffd86a0 0x4010dfac:0x3ffd86c0 0x400d862e:0x3ffd86e0 0x400dc3e6:0x3ffd8710 0x401cb62d:0x3ffd8870 0x4011e39b:0x3ffd88a0 0x400de4a2:0x3ffd8900 0x401cb6dd:0x3ffd8930 0x40109ce5:0x3ffd8960 0x4010a533:0x3ffd8a50 0x4010a6af:0x3ffd8a90 0x4010a74d:0x3ffd8ac0 ELF file SHA256: 15f94b9d4a73bab1 E (4026) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:13192 load:0x40080400,len:3028 entry 0x400805e4 E (679) esp_core_dump_flash: No core du极partition found! E (679) esp_core_dump_flash: No core dump partition found! Starting OpenDTU Initialize FS... done Reading configuration... done Reading PinMapping... [ 194][E][vfs_api.cpp:105] open(): /littlefs/pin_mapping.json does not exist, no permits for creation using default config done Initialize Network... done Setting Hostname... Configuring WiFi STA using new credentials... done Initialize NTP... done Initialize SunPosition... done Initialize MqTT... done Initialize WebApi... WiFi disconnected done Initialize Display... done Initialize LEDs... done Check for default DTU serial... done done Initialize Hoymiles interface... NRF: Connection successful Setting radio PA level... Setting DTU serial... Setting poll interval... Adding inverter: 116173708786 - HM1500 done done Initialize ve.direct interface... ve.direct rx = 22, tx = 21 done Initialize Pylontech battery interface... Pylontech ` kann mir jemand helfen was mache ich falsch? |
Beta Was this translation helpful? Give feedback.
Replies: 9 comments 16 replies
-
Sieht so aus, als ob der ESP permanent abstürzt. Warum? Gute Frage. Auf die Schnelle hätte ich das Huawei in Verdacht. Kommen da die richtigen Werte an? BZW. erst mal deaktivieren. |
Beta Was this translation helpful? Give feedback.
-
Huawei Batterie Ve.direkt deaktiviert. |
Beta Was this translation helpful? Give feedback.
-
Also bei mir ist sofort Ende, sobald ich MQTT aktiviere.... ich nutzte folgendes Release: |
Beta Was this translation helpful? Give feedback.
-
Hat einer von euch ein Konsolenlog (über die serielle Schnittstelle)? Irgendwelche Infos, wo genau das passiert? |
Beta Was this translation helpful? Give feedback.
-
Biddeschön. Configuring Ethernet DHCP IP... done Core 1 register dump: Backtrace: 0x401cd50c:0x3ffdc2b0 0x4010e804:0x3ffdc2d0 0x400d862e:0x3ffdc2f0 0x400dc3e6:0x3ffdc320 0x401cbc6d:0x3ffdc480 0x4011e947:0x3ffdc4b0 0x400dec7a:0x3ffdc510 0x401cbd4d:0x3ffdc540 0x4010a53d:0x3ffdc570 0x4010ad8b:0x3ffdc660 0x4010af07:0x3ffdc6a0 0x4010afa5:0x3ffdc6d0 |
Beta Was this translation helpful? Give feedback.
-
Habe eben 5d4c686 in den development branch committed. Kannst du das mal testen. |
Beta Was this translation helpful? Give feedback.
-
Ich habe gerade mit einem ESP32 ohne nRF24 ausprobiert und da funktioniert MQTT mit Verbindung ioBrocker jetzt perfekt und OpenDTU bleibt weiter schnell und erreichbar. |
Beta Was this translation helpful? Give feedback.
-
Sollte mit der Version 2023.04.29 funktionieren. |
Beta Was this translation helpful? Give feedback.
-
This discussion has been automatically locked since there has not been any recent activity after it was closed. Please open a new discussion for related concerns. |
Beta Was this translation helpful? Give feedback.
Sollte mit der Version 2023.04.29 funktionieren.