nbfc service unable to start when using zenpower instead of k10temp #1096
Comments
|
Mine works without problem. Try to start the nbfc system first and then unload k10temp and load zenpower мар 15 21:37:24 Nitro systemd[1]: Starting NoteBook FanControl service... |
|
ok for some reason this work but with this workaround i will have to switch to k10temp before each restart and swicth to zenpower after nbfc has started this don't fix the issues unfortunatly 😢 |
|
Well after kernel update to 5.10.23 this workaround no longer works. I hope that someone can add in the code native support for zenpower. |
|
OK got it working. Delete NBFC folder from /opt and /home folders, download the source again and go to Core/Plugins/StagWare.Plugins.FSTemperatureMonitor/FSTemperatureMonitor.cs open it and edit line 28 to include "zenpower" , save and then compile it again and it should work. |
|
So, blacklisted k10temp, zenpower loads automatically rebooted and guess what? I works like a charm with zenpower! |
|
Ohhh I will try and close this issue once I managed to do it I don't have my laptop with me right now thanks a lot X) batmalin |
|
You are welcome mate! |
|
thank you so much, this fixed my problem too! (adding "zenpower" to the list). I was previously getting this message: Could not load a plugin which implements StagWare.FanControl.Plugins.ITemperatureMonitor |
|
Glad that it helped. |
|
This issue is stale because it has been open more than 180 days with no activity. If nobody comments within 7 days, this issue will be closed |
Describe the bug
i recently decide to install zenpower for having a info about power consumption of my cpu but when using zenpower nbfc became unable to start
To Reproduce
`
sudo modprobe -r k10temp && sudo modprobe zenpower
~ sensors
amdgpu-pci-0100
Adapter: PCI adapter
vddgfx: 850.00 mV
edge: +55.0°C (crit = +94.0°C, hyst = -273.1°C)
power1: 13.14 W (cap = 60.00 W)
zenpower-pci-00c3
Adapter: PCI adapter
SVI2_Core: 832.00 mV
SVI2_SoC: 1.09 V
Tdie: +56.5°C (high = +95.0°C)
Tctl: +56.5°C
SVI2_P_Core: 16.43 W
SVI2_P_SoC: 16.18 W
SVI2_C_Core: 20.78 A
SVI2_C_SoC: 14.79 A
amdgpu-pci-0400
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +56.0°C
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +53.0°C
BAT1-acpi-0
Adapter: ACPI interface
in0: 17.03 V
curr1: 0.00 A
sudo systemctl start nbfc
~ sudo systemctl status nbfc
● nbfc.service - NoteBook FanControl service
Loaded: loaded (/etc/systemd/system/nbfc.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Fri 2021-03-12 12:35:20 CET; 10s ago
Process: 7529 ExecStart=/opt/nbfc/nbfcservice.sh start (code=exited, status=0/SUCCESS)
Main PID: 7532 (code=exited, status=1/FAILURE)
mar 12 12:35:20 yato202010 systemd[1]: nbfc.service: Scheduled restart job, restart counter is at 6.
mar 12 12:35:20 yato202010 systemd[1]: Stopped NoteBook FanControl service.
mar 12 12:35:20 yato202010 systemd[1]: nbfc.service: Start request repeated too quickly.
mar 12 12:35:20 yato202010 systemd[1]: nbfc.service: Failed with result 'exit-code'.
mar 12 12:35:20 yato202010 systemd[1]: Failed to start NoteBook FanControl service.
sudo modprobe -r zenpower && sudo modprobe k10temp
sudo systemctl start nbfc
~ sudo systemctl status nbfc
● nbfc.service - NoteBook FanControl service
Loaded: loaded (/etc/systemd/system/nbfc.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2021-03-12 12:36:47 CET; 7s ago
Process: 7918 ExecStart=/opt/nbfc/nbfcservice.sh start (code=exited, status=0/SUCCESS)
Main PID: 7921 (mono)
Tasks: 11 (limit: 17863)
Memory: 32.7M
CGroup: /system.slice/nbfc.service
└─7921 /usr/bin/mono /usr/lib/mono/4.5/mono-service.exe -l:/run/nbfc.pid -m:NbfcService /opt/nbfc/NbfcService.exe
mar 12 12:36:47 yato202010 systemd[1]: Starting NoteBook FanControl service...
mar 12 12:36:47 yato202010 systemd[1]: nbfc.service: Can't open PID file /run/nbfc.pid (yet?) after start: Operation not permitted
mar 12 12:36:47 yato202010 systemd[1]: Started NoteBook FanControl service.
mar 12 12:36:48 yato202010 mono[7921]: NbfcService: Service NoteBookFanControlService started
~
~ sudo systemctl status nbfc
● nbfc.service - NoteBook FanControl service
Loaded: loaded (/etc/systemd/system/nbfc.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2021-03-12 12:36:47 CET; 1min 16s ago
Process: 7918 ExecStart=/opt/nbfc/nbfcservice.sh start (code=exited, status=0/SUCCESS)
Main PID: 7921 (mono)
Tasks: 11 (limit: 17863)
Memory: 32.8M
CGroup: /system.slice/nbfc.service
└─7921 /usr/bin/mono /usr/lib/mono/4.5/mono-service.exe -l:/run/nbfc.pid -m:NbfcService /opt/nbfc/NbfcService.exe
mar 12 12:36:47 yato202010 systemd[1]: Starting NoteBook FanControl service...
mar 12 12:36:47 yato202010 systemd[1]: nbfc.service: Can't open PID file /run/nbfc.pid (yet?) after start: Operation not permitted
mar 12 12:36:47 yato202010 systemd[1]: Started NoteBook FanControl service.
mar 12 12:36:48 yato202010 mono[7921]: NbfcService: Service NoteBookFanControlService started
~ sensors
amdgpu-pci-0100
Adapter: PCI adapter
vddgfx: 850.00 mV
edge: +55.0°C (crit = +94.0°C, hyst = -273.1°C)
power1: 13.14 W (cap = 60.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +53.8°C
Tdie: +53.8°C
amdgpu-pci-0400
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +53.0°C
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +53.0°C
BAT1-acpi-0
Adapter: ACPI interface
in0: 17.03 V
curr1: 0.00 A
`
System information
-OS: Manjaro Linux x86_64
-Host: Nitro AN515-42 V1.18
-Kernel: 5.11.2-1-MANJARO
-Shell: zsh 5.8
-Resolution: 1920x1080
-DE: Plasma 5.21.2
-WM: KWin
-CPU: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx (8) @ 2.000GHz
-GPU: AMD Radeon Vega 8 Mobile Series
-GPU: AMD ATI Radeon RX 560X
-Memory: 16 Gb
NbfcServiceLog.txt
The text was updated successfully, but these errors were encountered: