Fixed serious bug: the register's CLEAR pin is now pulled high instea…

…d of low. The CLEAR pin of the 74HC595 was accidentally connected to ground, pulling it low and thereby active all the time, preventing the register from working normally. It is now pulled to high and thereby inactive, allowing normal operation. The board now bears the version 1.1. The board has been updated to use the parts from the new sub-libraries. The last throughole resister has been replaced with an 1206 surface mount version. The lower right mounting has been moved to the left of the connector and can now actually be used even with a locking connector attached. All of the writing is now on the appropriate layer.
hmbusch · Apr 23, 2012 · 65fcaaa · 65fcaaa
1 parent b5abbe7
commit 65fcaaa
Show file tree

Hide file tree

Showing 2 changed files with 457 additions and 407 deletions.
diff --git a/SevenSegment/eagle-files/simple-8-digit-connector-board.brd b/SevenSegment/eagle-files/simple-8-digit-connector-board.brd
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="6.1">
+<eagle version="6.2">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>
@@ -77,24 +77,24 @@
 <wire x1="91" y1="0" x2="91" y2="50" width="0" layer="20"/>
 <wire x1="91" y1="50" x2="0" y2="50" width="0" layer="20"/>
 <wire x1="0" y1="50" x2="0" y2="0" width="0" layer="20"/>
-<text x="7.8275" y="4.8625" size="1.778" layer="21" font="vector" rot="R180" align="top-right">http://www.icanmakeit.de</text>
-<text x="14.3575" y="46.885" size="1.778" layer="21" font="vector">Seven-Segment Board v1.0</text>
-<text x="66.04" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">+5V</text>
-<text x="68.58" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">GND</text>
-<text x="71.12" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">REG_CLOCK</text>
-<text x="73.66" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">REG_DATA</text>
-<text x="76.2" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">REG_LATCH</text>
-<text x="78.74" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">!REG_ENABLE</text>
-<text x="81.28" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">DEC_CLOCK</text>
-<text x="83.82" y="12.6525" size="0.8128" layer="21" font="vector" rot="R90" align="center-right">DEC_RESET</text>
-<text x="7.8275" y="2.3225" size="1.778" layer="21" font="vector" rot="R180" align="top-right">https://github.com/hmbusch</text>
+<text x="7.8275" y="4.8625" size="1.778" layer="25" font="vector" rot="R180" align="top-right">http://www.icanmakeit.de</text>
+<text x="14.3575" y="46.885" size="1.778" layer="25" font="vector">Seven-Segment Board v1.1</text>
+<text x="66.04" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">+5V</text>
+<text x="68.58" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">GND</text>
+<text x="71.12" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">REG_CLOCK</text>
+<text x="73.66" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">REG_DATA</text>
+<text x="76.2" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">REG_LATCH</text>
+<text x="78.74" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">!REG_ENABLE</text>
+<text x="81.28" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">DEC_CLOCK</text>
+<text x="83.82" y="12.6525" size="0.8128" layer="25" font="vector" rot="R90" align="center-right">DEC_RESET</text>
+<text x="7.8275" y="2.3225" size="1.778" layer="25" font="vector" rot="R180" align="top-right">https://github.com/hmbusch</text>
 <hole x="3.81" y="3.81" drill="3.2"/>
 <hole x="3.81" y="46.99" drill="3.2"/>
 <hole x="87.63" y="46.99" drill="3.2"/>
-<hole x="87.63" y="3.81" drill="3.2"/>
+<hole x="60.63" y="3.81" drill="3.2"/>
 <text x="88.265" y="8.5725" size="1.778" layer="16" font="vector" ratio="12" rot="MR90">http://www.icanmakeit.de</text>
 <text x="85.725" y="6.35" size="1.778" layer="16" font="vector" ratio="12" rot="MR90">https://github.com/hmbusch</text>
-<text x="51.1875" y="46.885" size="1.778" layer="16" font="vector" ratio="15" rot="MR0">Seven-Segment Board v1.0</text>
+<text x="51.1875" y="46.885" size="1.778" layer="16" font="vector" ratio="15" rot="MR0">Seven-Segment Board v1.1</text>
 <text x="66.2425" y="12.7" size="0.8128" layer="26" font="vector" rot="MR90" align="center-right">+5V</text>
 <text x="68.7025" y="12.7" size="0.8128" layer="26" font="vector" rot="MR90" align="center-right">GND</text>
 <text x="71.1625" y="12.7" size="0.8128" layer="26" font="vector" rot="MR90" align="center-right">REG_CLOCK</text>
@@ -103,7 +103,7 @@
 <text x="78.5425" y="12.7" size="0.8128" layer="26" font="vector" rot="MR90" align="center-right">!REG_ENABLE</text>
 <text x="81.3025" y="12.7" size="0.8128" layer="26" font="vector" rot="MR90" align="center-right">DEC_CLOCK</text>
 <text x="83.7625" y="12.6" size="0.8128" layer="26" font="vector" rot="MR90" align="center-right">DEC_RESET</text>
-<text x="51.3575" y="46.885" size="1.778" layer="26" font="vector" rot="MR0">Seven-Segment Board v1.0</text>
+<text x="51.3575" y="46.885" size="1.778" layer="26" font="vector" rot="MR0">Seven-Segment Board v1.1</text>
 </plain>
 <libraries>
 <library name="icmi-custom-parts">
@@ -295,6 +295,24 @@ IC size 3.9mm x 9.9mm
 <text x="0" y="5.1" size="1.27" layer="27" font="vector" rot="SR270" align="center-left">&gt;VALUE</text>
 <wire x1="-2.31" y1="5.63" x2="-2.3" y2="-5.6" width="0.4064" layer="21"/>
 </package>
+</packages>
+</library>
+<library name="icmi-passive-parts">
+<description>&lt;h1&gt;ICMI Custom Parts - Passive Components&lt;/h1&gt;
+                &lt;p&gt;This library contains a selection of passive components such as resistors and capacitors.&lt;/p&gt;
+                &lt;p&gt;You can always find the latest version of this library under &lt;a
+                href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries"&gt;https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries&lt;/a&gt;&lt;/p&gt;
+                &lt;p&gt;&lt;span xmlns:dct="http://purl.org/dc/terms/" href="http://purl.org/dc/dcmitype/Dataset"
+                property="dct:title" rel="dct:type"&gt;ICMI Custom Parts for EAGLE&lt;/span&gt; by &lt;a
+                xmlns:cc="http://creativecommons.org/ns#"
+                href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries" property="cc:attributionName"
+                rel="cc:attributionURL"&gt;Hendrik Busch&lt;/a&gt; is licensed under a &lt;a rel="license"
+                href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"&gt;Creative Commons
+                Attribution-NonCommercial-ShareAlike 3.0 Germany License&lt;/a&gt;.&lt;/p&gt;
+                &lt;p&gt;&lt;a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"&gt;&lt;img
+                alt="Creative Commons License" style="border-width:0"
+                src="http://i.creativecommons.org/l/by-nc-sa/3.0/de/88x31.png" /&gt;&lt;/a&gt;&lt;/p&gt;</description>
+<packages>
 <package name="R1206">
 <description>&lt;strong&gt;Resistor, SMD package 1206&lt;/strong&gt;</description>
 <smd name="P$1" x="-1.65" y="0" dx="1.1" dy="1.7" layer="1"/>
@@ -315,7 +333,17 @@ IC size 3.9mm x 9.9mm
 <rectangle x1="0.7" y1="-0.8" x2="1.6" y2="0.8" layer="51"/>
 <rectangle x1="-0.4" y1="-0.8" x2="0.4" y2="0.8" layer="35"/>
 </package>
-<package name="BREAKAWAY_90DEG_8_WIDE">
+</packages>
+</library>
+<library name="icmi-connectors">
+<description>&lt;h1&gt;ICMI Custom Parts - Connectors&lt;/h1&gt;
+&lt;p&gt;This library contains basic connectors (mainly pin headers) with various different packages.&lt;/p&gt;
+  &lt;p&gt;You can always find the latest version of this library under &lt;a
+                href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries"&gt;https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries&lt;/a&gt;&lt;/p&gt;
+&lt;p&gt;&lt;span xmlns:dct="http://purl.org/dc/terms/" href="http://purl.org/dc/dcmitype/Dataset" property="dct:title" rel="dct:type"&gt;ICMI Custom Parts for EAGLE&lt;/span&gt; by &lt;a xmlns:cc="http://creativecommons.org/ns#" href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries" property="cc:attributionName" rel="cc:attributionURL"&gt;Hendrik Busch&lt;/a&gt; is licensed under a &lt;a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"&gt;Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Germany License&lt;/a&gt;.&lt;/p&gt;
+&lt;p&gt;&lt;a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"&gt;&lt;img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-sa/3.0/de/88x31.png" /&gt;&lt;/a&gt;&lt;/p&gt;</description>
+<packages>
+<package name="BREAKAWAY_ANGLED_8_WIDE">
 <pad name="8" x="-2.54" y="8.89" drill="1" shape="long"/>
 <pad name="7" x="-2.54" y="6.35" drill="1" shape="long"/>
 <pad name="6" x="-2.54" y="3.81" drill="1" shape="long"/>
@@ -373,7 +401,8 @@ IC size 3.9mm x 9.9mm
 <wire x1="-3.81" y1="-8.128" x2="-3.302" y2="-7.62" width="0.127" layer="51"/>
 <wire x1="-1.27" y1="-8.128" x2="-1.27" y2="-9.652" width="0.127" layer="51"/>
 <wire x1="-1.778" y1="-10.16" x2="-3.302" y2="-10.16" width="0.127" layer="51"/>
-<text x="0" y="-9.525" size="1.27" layer="25" font="vector" rot="R90" align="center-left">&gt;NAME</text>
+<text x="0" y="-9.525" size="1.27" layer="25" font="vector" rot="R90" align="center-left">&gt;NAME
+                    </text>
 <text x="-5.08" y="-8.89" size="1.27" layer="25" font="vector" rot="R270" align="center">1</text>
 <text x="-5.08" y="8.89" size="1.27" layer="25" font="vector" rot="R270" align="center">8</text>
 <wire x1="-3.556" y1="7.874" x2="-3.302" y2="7.62" width="0.254" layer="21"/>
@@ -401,31 +430,6 @@ IC size 3.9mm x 9.9mm
 <wire x1="1.27" y1="9.525" x2="7.62" y2="9.525" width="0.254" layer="21"/>
 <wire x1="7.62" y1="8.89" x2="7.62" y2="-8.89" width="0.254" layer="21"/>
 </package>
-<package name="RESISTOR-1/4W-AXIAL">
-<description>&lt;strong&gt;Resistor, 1/4W, axial&lt;/strong&gt;
-
-&lt;p&gt;Grid 0.5 inch / 12.7 mm&lt;/p&gt;</description>
-<pad name="P$1" x="-5.08" y="0" drill="0.8" diameter="1.6764"/>
-<pad name="P$2" x="5.08" y="0" drill="0.8" diameter="1.6764"/>
-<wire x1="-3.25" y1="1.15" x2="3.25" y2="1.15" width="0.2032" layer="21"/>
-<wire x1="3.25" y1="1.15" x2="3.25" y2="0" width="0.2032" layer="21"/>
-<wire x1="3.25" y1="0" x2="3.25" y2="-1.15" width="0.2032" layer="21"/>
-<wire x1="3.25" y1="-1.15" x2="-3.25" y2="-1.15" width="0.2032" layer="21"/>
-<wire x1="-3.25" y1="-1.15" x2="-3.25" y2="0" width="0.2032" layer="21"/>
-<wire x1="-3.25" y1="0" x2="-3.25" y2="1.15" width="0.2032" layer="21"/>
-<wire x1="-3.25" y1="0" x2="-3.9" y2="0" width="0.2032" layer="21"/>
-<wire x1="3.25" y1="0" x2="3.9" y2="0" width="0.2032" layer="21"/>
-<wire x1="-3.25" y1="1.15" x2="3.25" y2="1.15" width="0.127" layer="51"/>
-<wire x1="3.25" y1="1.15" x2="3.25" y2="0" width="0.127" layer="51"/>
-<wire x1="3.25" y1="0" x2="3.25" y2="-1.15" width="0.127" layer="51"/>
-<wire x1="3.25" y1="-1.15" x2="-3.25" y2="-1.15" width="0.127" layer="51"/>
-<wire x1="-3.25" y1="-1.15" x2="-3.25" y2="0" width="0.127" layer="51"/>
-<wire x1="-3.25" y1="0" x2="-3.25" y2="1.15" width="0.127" layer="51"/>
-<wire x1="-3.25" y1="0" x2="-3.9" y2="0" width="0.127" layer="51"/>
-<wire x1="3.25" y1="0" x2="3.9" y2="0" width="0.127" layer="51"/>
-<text x="-3.3" y="1.5" size="1.27" layer="25" font="vector">&gt;NAME</text>
-<text x="-3.3" y="-2.7" size="1.27" layer="27" font="vector">&gt;VALUE</text>
-</package>
 </packages>
 </library>
 </libraries>
@@ -653,29 +657,29 @@ design rules under a new name.</description>
 <attribute name="NAME" x="18.0975" y="13.335" size="1.27" layer="25" font="vector" rot="R90"/>
 <attribute name="VALUE" x="19.3675" y="13.97" size="1.27" layer="27" font="vector"/>
 </element>
-<element name="R1" library="icmi-custom-parts" package="R1206" value="150" x="8.89" y="43.815" smashed="yes">
+<element name="R1" library="icmi-passive-parts" package="R1206" value="150" x="8.89" y="43.815" smashed="yes">
 <attribute name="NAME" x="2.78" y="43.745" size="1.016" layer="25" font="vector"/>
 </element>
-<element name="R2" library="icmi-custom-parts" package="R1206" value="150" x="32.7025" y="44.1325" smashed="yes">
+<element name="R2" library="icmi-passive-parts" package="R1206" value="150" x="32.7025" y="44.1325" smashed="yes">
 <attribute name="NAME" x="30.4025" y="45.3325" size="1.016" layer="25" font="vector"/>
 </element>
-<element name="R3" library="icmi-custom-parts" package="R1206" value="150" x="5.3975" y="24.4475" smashed="yes" rot="R180">
+<element name="R3" library="icmi-passive-parts" package="R1206" value="150" x="5.3975" y="24.4475" smashed="yes" rot="R180">
 <attribute name="NAME" x="1.5175" y="25.4775" size="1.016" layer="25" font="vector" rot="R270"/>
 </element>
-<element name="R4" library="icmi-custom-parts" package="R1206" value="150" x="26.3525" y="24.4475" smashed="yes">
+<element name="R4" library="icmi-passive-parts" package="R1206" value="150" x="26.3525" y="24.4475" smashed="yes">
 <attribute name="NAME" x="23.565" y="23.735" size="1.016" layer="25" font="vector" rot="R90"/>
 </element>
-<element name="R5" library="icmi-custom-parts" package="R1206" value="150" x="45.4025" y="24.4475" smashed="yes">
+<element name="R5" library="icmi-passive-parts" package="R1206" value="150" x="45.4025" y="24.4475" smashed="yes">
 <attribute name="NAME" x="43.1025" y="25.6475" size="1.016" layer="25" font="vector"/>
 </element>
-<element name="R6" library="icmi-custom-parts" package="R1206" value="150" x="47.9425" y="44.1325" smashed="yes">
+<element name="R6" library="icmi-passive-parts" package="R1206" value="150" x="47.9425" y="44.1325" smashed="yes">
 <attribute name="NAME" x="45.6425" y="45.3325" size="1.016" layer="25" font="vector"/>
 </element>
-<element name="R7" library="icmi-custom-parts" package="R1206" value="150" x="79.6925" y="44.1325" smashed="yes">
+<element name="R7" library="icmi-passive-parts" package="R1206" value="150" x="79.6925" y="44.1325" smashed="yes">
 <attribute name="NAME" x="77.3925" y="45.3325" size="1.016" layer="25" font="vector"/>
 </element>
-<element name="C1" library="icmi-custom-parts" package="BREAKAWAY_90DEG_8_WIDE" value="PIN_HEADER_8-ANGLED-WIDE" x="74.93" y="12.065" smashed="yes" rot="R270"/>
-<element name="R8" library="icmi-custom-parts" package="RESISTOR-1/4W-AXIAL" value="10K" x="61.595" y="13.97" rot="R90"/>
+<element name="C1" library="icmi-connectors" package="BREAKAWAY_ANGLED_8_WIDE" value="PIN_HEADER_8-ANGLED-WIDE" x="74.93" y="12.065" smashed="yes" rot="R270"/>
+<element name="R8" library="icmi-passive-parts" package="R1206" value="10K" x="55.405" y="16.03" rot="R270"/>
 </elements>
 <signals>
 <signal name="SEG_C">
@@ -1039,9 +1043,17 @@ design rules under a new name.</description>
 <wire x1="66.78" y1="17.78" x2="66" y2="17" width="0.4064" layer="1"/>
 <wire x1="66" y1="17" x2="66" y2="14.645" width="0.4064" layer="1"/>
 <wire x1="66" y1="14.645" x2="66.04" y2="14.605" width="0.4064" layer="1"/>
+<contactref element="IC2" pad="10"/>
+<wire x1="26.9875" y1="17.205" x2="27" y2="17.205" width="0.4064" layer="1"/>
+<wire x1="27" y1="17.205" x2="27" y2="14" width="0.4064" layer="1"/>
+<wire x1="27" y1="14" x2="22" y2="14" width="0.4064" layer="1"/>
+<wire x1="22" y1="14" x2="22" y2="14.6" width="0.4064" layer="1"/>
+<wire x1="22" y1="14.6" x2="21.1" y2="15.5" width="0.4064" layer="1"/>
+<wire x1="21.1" y1="15.5" x2="19.7" y2="15.5" width="0.4064" layer="1"/>
+<wire x1="19.7" y1="15.5" x2="19.3675" y2="15.8325" width="0.4064" layer="1"/>
+<wire x1="19.3675" y1="15.8325" x2="19.3675" y2="17.205" width="0.4064" layer="1"/>
 </signal>
 <signal name="GND">
-<contactref element="IC2" pad="10"/>
 <contactref element="IC3" pad="9"/>
 <contactref element="IC1" pad="8"/>
 <contactref element="IC2" pad="8"/>
@@ -1062,9 +1074,6 @@ design rules under a new name.</description>
 <wire x1="42.8625" y1="8.89" x2="42.8625" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="42.8625" y1="12.065" x2="44.45" y2="13.335" width="0.4064" layer="1"/>
 <wire x1="44.45" y1="13.335" x2="45.78" y2="13.335" width="0.4064" layer="1"/>
-<wire x1="28.2575" y1="12.005" x2="28.2575" y2="14.9225" width="0.4064" layer="1"/>
-<wire x1="28.2575" y1="14.9225" x2="26.9875" y2="16.1925" width="0.4064" layer="1"/>
-<wire x1="26.9875" y1="16.1925" x2="26.9875" y2="17.205" width="0.4064" layer="1"/>
 <wire x1="68.58" y1="14.605" x2="68.58" y2="13.97" width="0.4064" layer="16"/>
 <wire x1="44.1325" y1="6.35" x2="42.2275" y2="8.255" width="0.4064" layer="1"/>
 <wire x1="61.595" y1="12.065" x2="55.88" y2="6.35" width="0.4064" layer="16"/>
@@ -1083,9 +1092,10 @@ design rules under a new name.</description>
 <vertex x="91" y="0"/>
 <vertex x="0" y="0"/>
 </polygon>
-<wire x1="61.595" y1="8.89" x2="61.595" y2="12.065" width="0.4064" layer="16"/>
+<wire x1="61.595" y1="12.32" x2="61.595" y2="12.065" width="0.4064" layer="16"/>
 <wire x1="61.595" y1="12.065" x2="66.675" y2="12.065" width="0.4064" layer="16"/>
 <wire x1="66.675" y1="12.065" x2="68.58" y2="13.97" width="0.4064" layer="16"/>
+<wire x1="55.405" y1="17.68" x2="61.595" y2="12.32" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="DEC_1">
 <contactref element="IC1" pad="3"/>
@@ -1355,26 +1365,29 @@ design rules under a new name.</description>
 <contactref element="IC2" pad="13"/>
 <contactref element="C1" pad="6"/>
 <contactref element="R8" pad="P$2"/>
-<wire x1="61.595" y1="19.05" x2="62.23" y2="19.05" width="0.4064" layer="16"/>
 <wire x1="62.23" y1="19.05" x2="63.5" y2="20.32" width="0.4064" layer="16"/>
 <wire x1="63.5" y1="20.32" x2="77.47" y2="20.32" width="0.4064" layer="16"/>
 <wire x1="77.47" y1="20.32" x2="78.74" y2="19.05" width="0.4064" layer="16"/>
 <wire x1="78.74" y1="19.05" x2="78.74" y2="14.605" width="0.4064" layer="16"/>
-<wire x1="23.1775" y1="17.205" x2="22.86" y2="16.8875" width="0.4064" layer="1"/>
-<wire x1="22.86" y1="16.8875" x2="22.86" y2="14.2875" width="0.4064" layer="1"/>
-<wire x1="22.86" y1="14.2875" x2="22.5425" y2="13.97" width="0.4064" layer="1"/>
-<wire x1="22.5425" y1="13.97" x2="21.59" y2="13.97" width="0.4064" layer="1"/>
-<via x="21.59" y="13.97" extent="1-16" drill="0.6"/>
-<wire x1="21.59" y1="13.97" x2="21.59" y2="12.065" width="0.4064" layer="16"/>
-<wire x1="21.59" y1="12.065" x2="22.225" y2="11.43" width="0.4064" layer="16"/>
-<wire x1="22.225" y1="11.43" x2="32.385" y2="11.43" width="0.4064" layer="16"/>
-<wire x1="32.385" y1="11.43" x2="34.29" y2="9.525" width="0.4064" layer="16"/>
+<wire x1="32.385" y1="11.43" x2="32.415" y2="11.4" width="0.4064" layer="16"/>
+<wire x1="32.415" y1="11.4" x2="34.29" y2="9.525" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="9.525" x2="52.705" y2="9.525" width="0.4064" layer="16"/>
 <wire x1="52.705" y1="9.525" x2="53.34" y2="10.16" width="0.4064" layer="16"/>
 <via x="53.34" y="10.16" extent="1-16" drill="0.6"/>
-<wire x1="53.34" y1="10.16" x2="55.88" y2="10.16" width="0.4064" layer="1"/>
-<wire x1="55.88" y1="10.16" x2="61.595" y2="15.875" width="0.4064" layer="1"/>
-<wire x1="61.595" y1="15.875" x2="61.595" y2="19.05" width="0.4064" layer="1"/>
+<wire x1="23.1775" y1="17.205" x2="23.2" y2="17.1825" width="0.4064" layer="1"/>
+<wire x1="23.2" y1="17.1825" x2="23.2" y2="15.3" width="0.4064" layer="1"/>
+<via x="23.2" y="15.3" extent="1-16" drill="0.6"/>
+<wire x1="23.2" y1="15.3" x2="23.2" y2="12.3" width="0.4064" layer="16"/>
+<wire x1="23.2" y1="12.3" x2="24.1" y2="11.4" width="0.4064" layer="16"/>
+<wire x1="24.1" y1="11.4" x2="32.415" y2="11.4" width="0.4064" layer="16"/>
+<wire x1="62.23" y1="19.05" x2="62" y2="19.05" width="0.4064" layer="16"/>
+<wire x1="62" y1="19.05" x2="62" y2="19" width="0.4064" layer="16"/>
+<via x="62" y="19" extent="1-16" drill="0.6"/>
+<wire x1="62" y1="19" x2="62" y2="16" width="0.4064" layer="1"/>
+<wire x1="62" y1="16" x2="56.16" y2="10.16" width="0.4064" layer="1"/>
+<wire x1="56.16" y1="10.16" x2="53.34" y2="10.16" width="0.4064" layer="1"/>
+<wire x1="55.405" y1="14.38" x2="53.34" y2="12.315" width="0.4064" layer="1"/>
+<wire x1="53.34" y1="12.315" x2="53.34" y2="10.16" width="0.4064" layer="1"/>
 </signal>
 <signal name="DA_OUT_1">
 <contactref element="IC3" pad="18"/>