-
-
Notifications
You must be signed in to change notification settings - Fork 28.6k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Daikin AC integration: Mode Humidification #88156
Comments
Hey there @fredrike, mind taking a look at this issue as it has been labeled with an integration ( Code owner commandsCode owners of
(message by CodeOwnersMention) daikin documentation |
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. |
Do you need any additional information? |
Yes please. There is an issue with this in the pydaikin repo and we'll need to add support for hum there first please add more info there. https://bitbucket.org/mustang51/pydaikin/issues/2/daikin-ururu-sarara-add-support-for |
Good day!
How can I help?
…On Sat, 27 May 2023 at 06:43, Fredrik Erlandsson ***@***.***> wrote:
Do you need any additional information?
Yes please. There is an issue with this in the pydaikin repo and we'll
need to add support for hum there first please add more info there.
https://bitbucket.org/mustang51/pydaikin/issues/2/daikin-ururu-sarara-add-support-for
—
Reply to this email directly, view it on GitHub
<#88156 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A5TPRNF5II3IUWARUJKIPPDXIFZ6ZANCNFSM6AAAAAAU4N2T2I>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
I need output from what's sent to the unit and some output on the entrypoint |
Hi!
How can I start http:///aircon/get_control_info
Is it working in Windows?
…On Mon, 29 May 2023 at 08:25, Fredrik Erlandsson ***@***.***> wrote:
I need output from what's sent to the unit and some output on the
entrypoint http:///aircon/get_control_info
—
Reply to this email directly, view it on GitHub
<#88156 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A5TPRNE2SRU6A6CY3T4HPUTXIQXNLANCNFSM6AAAAAAU4N2T2I>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
I guess it works in windows, you should open your browser to the address http://my-daikin-ip/aircon/get_control_info Change to the right ip-address.. |
BRP069B4x firmware 1.14.84 ret=OK,pow=0,mode=HUM,adv=,stemp=--,shum=40,dt1=25.0,dt2=M,dt3=25.0,dt4=--,dt5=--,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=40,dh5=40,dh7=AUTO,dhh=50,b_mode=4,b_stemp=--,b_shum=40,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=A,dfr3=5,dfr4=A,dfr5=A,dfr6=A,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0 |
Can you paste a few different outputs with different modes so we can figure out what to look for to identify that your device support Also, please paste a few different humidification targets. @icovada do you like to have a look in implementing this in pydaikin? |
ohhh a humidifier, interesting! |
STANDBY HUMIDIFY - LOW HUMIDIFY - STD (Standard) HUMIDIFY - HI HUMIDIFY - CONT STANDBY |
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. |
Do you need any additional info? |
@mykm203 Can you also post the result of http://youraddress/aircon/get_model_info |
ret=OK,model=NOTSUPPORT,type=N,pv=1,cpv=0,mid=NA,s_fdir=3,en_scdltmr=1,en_onofftmr=1 |
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. |
Can I help you more? |
The problem
In Daikin AC integration mode HUMIDIFICATION missed, reported as Heat/Cool, which is different (Auto Temperature)
What version of Home Assistant Core has the issue?
2023.2.4
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant OS
Integration causing the issue
Daikin AC
Link to integration documentation on our website
https://www.home-assistant.io/integrations/daikin/
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response
The text was updated successfully, but these errors were encountered: