Skip to content

Analyzing CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) Protocol in IEEE 802.11 WLAN protocol

Notifications You must be signed in to change notification settings

hooman96/csma_ca_wlan

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

26 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CSMA/CA WLAN

Analyzing CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) Protocol in IEEE 802.11 WLAN protocol

Requirements

The code is written in 'C++/C' so 'G++/GCC' compiler is required to run the code and simulation.

$ g++ simulator.cpp -o simulator
$ ./simulator

$ g++ wirelessLan.cpp
$ ./a.out

Description

This project demonstrates the discrete event simulations of WLAN (Wireless Local Area Network) with single queue M/M/1 model. Each wireless host has a FIFO (First In First Out) queue which holds the data packets and communicates with other nodes through a shared channel. The length of data frames a negative exponentially distributed random variable in the range of 0 and 1544 bytes and acknowledgement frame is constant 64 bytes. The propagation delay is ignored and transmission rate, R is 11 msec.

Implementation Logic

There are four types of events and their processing steps:

  1. Arrival
  • Generate the next arrival event for the current host
  • Create a data packet with random destination and current host as source
  • Insert the data packet to the current host queue
  1. Departure
  • Free the channel status
  • Create an acknowledegement packet and sends back to its host
  • Insert the acknowledegement packet to the current host queue
  1. Sync
  • check the status of channel if the channel is busy, freeze the hosts backoff counters
  • if channel is free, decrement the counters
  • reached zero counter, create a new departure event to transmit the packet, mark the channel busy
  • while transmitting, create a new timeout event
  • generate a new backoff counter for the current host (reset queue)
  • create next sync event and update sync time by adding .01 msec
  1. Timeout
  • Retransimission of the packet (failed transmiting), increase the transmission counter, n
  • set a new backoff in range of 0 and n * T

Data Analysis

Our simulations are runned variety of times with 1,000,000 events as default value. The plots are based on average delay of transmitted packets as function of lambda(arrival rate) as well as an additional plot which is average delay as function of T(maximum backoff values). We run the simulations with variety of T and lambda arrival rates packets/second and host numbers.

T 20, 40, 80, 160, 320, 400

lambda values λ = 0.01, 0.05, 0.1, 0.3, 0.6, 0.8, 0.9

The throughput increases as lambda increases which makes sense since more packets are transmitted with higher rate. Average delay though depend on the congestion of the network and number of the hosts. Some of the data points might seem up and down but the reasoning is that number of simulations can affect the smaller lambda values. However, as lambda increases the data points express the simulations more clearly.

alt tag

Authors

About

Analyzing CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) Protocol in IEEE 802.11 WLAN protocol

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages