The primary purpose of DeepBench is to benchmark operations that are important to deep learning on different hardware platforms. Although the fundamental computations behind deep learning are well understood, the way they are used in practice can be surprisingly diverse. For example, a matrix multiplication may be compute-bound, bandwidth-bound, or occupancy-bound, based on the size of the matrices being multiplied and the kernel implementation. Because every deep learning model uses these operations with different parameters, the optimization space for hardware and software targeting deep learning is large and underspecified.
DeepBench attempts to answer the question, "Which hardware provides the best performance on the basic operations used for training deep neural networks?". We specify these operations at a low level, suitable for use in hardware simulators for groups building new processors targeted at deep learning.
The Deep Learning eco system is consists of several different pieces. We wanted to highlight where DeepBench fits into this eco system. The diagram below describes the software and hardware components involved with deep learning. At the very top, deep learning frameworks like Baidu's [PaddlePaddle] (https://github.com/baidu/Paddle), Theano, TensorFlow, Torch etc. All these frameworks allow deep learning researchers to build models. They include basic building blocks like layers which can be connected in different ways to create a model. In order to train the deep learning models, the frameworks work with underlying neural network libraries such as NVIDIA's cuDNN and Intel's MKL. These libraries implement operations such as matrix multiply that are important to deep learning models. Finally, the models are trained on hardware like NVIDIA GPUs or Intel's Xeon Phi processor.
DeepBench uses the neural network libraries to benchmark the performance of basic operations on different hardware. It does not work with deep learning frameworks or deep learning models built for applications. We cannot measure the time required to train an entire model using DeepBench. The performance characteristics of models built for different applications are very different from each other. Therefore, we are benchmarking the underlying operations involved in training a deep learning model. Benchmarking these operations will help raise awareness amongst hardware vendors and software developers about the bottlenecks in deep learning training.
DeepBench consists of a set of basic operations (dense matrix
multiplies, convolutions and communication) as well as some recurrent
layer types. There is an Excel spreadsheet (DeepBenchKernels.xlsx)
in this repository that describes all of the sizes.
Both forward and backward operations are tested. This first version of the benchmark will focus on training performance in 32-bit floating-point arithmetic. Future versions may expand to focus on inference workloads as well as lower precision arithmetic.
We will use vendor supplied libraries even if faster independent libraries exist or faster results have been published. Most users will default to the vendor supplied libraries and as such the vendor supplied libraries are most representative of users' experience.
We are releasing with results for four hardware platforms, NVIDIA's
TitanX, M40, TitanX Pascal and Intel's Knights Landing. Hardware
vendors or independent users can run the appropriate benchmarks and
input the results into the spreadsheet. We provide an overview of the
results and all results are available in the results folder. We will
gladly accept pull requests for new hardware platforms.
Dense matrix multiplies exist in almost all deep neural networks today. They are used to implement fully connected layers and vanilla RNNs and are building blocks for other types of recurrent layers. Sometimes they are also used as a quick way to implement novel layer types for which custom code doesn't exist.
When performing the GEMM operation A * B = C, either or both of A
and B can be optionally transposed. Common terminology to describe a matrix problem
is the triple (M, N, K), which describes the sizes of the matrices involved,
and the “op” which tells us which matrices (if any) are transposed. The figure below
describes how the triple (M, N, K) correspond to the sizes of the matrices being multiplied.
The variant where both matrices
are transposed is not used in neural networks. The other three
variants are used, but they need not be implemented as a call to
SGEMM with those transpose descriptors. Sometimes it can be faster
to perform an in-place transpose followed by the appropriate
multiplication and a transpose back. Such optimizations should be
detailed in the spreadsheet.
The constant coefficients alpha and beta should both be 1.0 so that no work is elided.
Convolutions make up the vast majority of flops in networks that operate on images and videos and form important parts of networks such as speech and natural language modeling making them, perhaps, the single most important layer from a performance perspective.
Convolutions have 4 or 5 dimensional inputs and outputs giving rise to a large number of possible orderings for these dimensions. For the first version of the benchmark we are only concerned with performance in NCHW format i.e. data is presented in image, feature maps, rows and columns.
There are many techniques for computing convolutions that are optimal for different sizes of the filter and image, including: direct, matrix multiply based, FFT based, and Winograd based approaches. In the first version of this benchmark, we are not concerned about the accuracy of the different approaches since the general consensus is that 32-bit floating point is accurate enough for each of them. We have noted the approach used for each size in the spreadsheet.
Recurrent layers are usually made up of some combination of the above operations and also simpler operations such as unary or binary operations which aren't very compute intensive and generally are a small percentage of overall runtime. However, the GEMM and convolution operations are relatively small in recurrent layers, so the cost of these smaller operations can become significant. This is especially true if there is a high fixed overhead associated with starting a computation. It is also possible to use alternate storage formats for the recurrent matrices because the cost of converting to a new storage format can be amortized over the many steps of the recurrent computation. If this is done the time to convert to and from the custom format should be included in the overall time.
These factors lead to many optimization possibilities both within a time step and across a sequence of time steps such that measuring the raw performance of the operations is not necessarily representative of the performance of an entire recurrent layer. In this benchmark we focus on only one recurrent layer, even though there are even more optimization opportunities if one considers stacks of them.
The calculation of the inputs should not be included in the time for the recurrent layer calculation since it can be calculated as one large multiply and then consumed by the actual recurrent calculation. So in: h_t = g(Wx_t + Uh_t-1) the time for the calculation of Wx_t for all t should not be included in the time for the recurrent layer.
The backward calculation should calculate the updates with respect to the weights but not the inputs. All the recurrent work is done to calculate the weight updates, so calculating the updates with respect to the inputs as well just obscures what we are trying to measure.
The non-linearity for vanilla RNNs should be a ReLU. The internal non-linearities of the LSTM should be the standard operations - sigmoid for the gates and tanh for the activations. The LSTM should not have peephole connections.
Neural networks are today often trained across multiple GPUs or even multiple systems each with multiple GPUs. There are two main categories of techniques for doing this: synchronous and asynchronous. Synchronous techniques rely on keeping the parameters on all instances of the model synchronized, usually by making sure all instances of the model have the same copy of the gradients before taking an optimization step. The Message Passing Interface (MPI) primitive usually used to perform this operation is called All-Reduce. There are many ways to implement All-Reduce based on the number of ranks, the size of the data, and the topology of the network. This benchmark places no constraints on the implementation other than that it should be deterministic. Asynchronous methods are quite varied and in this version of the benchmark we will not be attempting to test these methods.
In order to evaluate All-Reduce, we use the following libraries and benchmarks:
The NCCL library contains a set of standard communication routines. The library supports any number of GPUs in a single node and can be run in single process or multi-process (MPI). The NCCL routines don't support All-Reduce across multiple nodes. In order to evaluate All-Reduce across multiple nodes, we use the benchmarks from OSU. We report the shortest latency achieved from all three implementations (NCCL single process, NCCL MPI, OpenMPI).
Each node has two CPU sockets, and each socket has a PCIe root complex. For each socket there are two PLX switches that are each connected to the CPU socket via 16 lanes of PCIe v3. There are two GPUs on each PLX switch. All pairs of GPUs communicate simultaneously over 16 lanes of PCIe v3. The two CPU sockets are connected via Intel QPI. The interconnect across nodes is InfiniBand FDR. The figure below shows a schematic diagram of one our nodes, where all devices connected by the same PCI root complex are encapsulated in a dotted box
The MPI_AllReduce time is measured on Intel Xeon Phi processor 7250 on Intel’s internal Endeavor cluster with Intel® Omni-Path Architecture (Intel® OPA) series 100 fabric with fat-tree topology, using Intel MPI 5.1.3.181.
In this section, we are documenting the performance for a few operations.
These are picked at random and are only meant to demonstrate the performance for a few applications.
The results below only include the time and TeraFLOPS for the fastest processor for the particular operation and parameters. The full results can be found in the results folder. The files in the results folder are:
DeepBench_IA_KNL7250.xlsx: Performance results on Intel's Xeon Phi ProcessorDeepBench_TitanX.xlsx: Performance results on NVIDIA's TitanX GPUsDeepBench_M40.xlsx: Performance results on NVIDIA's M40 GPUsDeepBench_TitanX_Pascal: Performance results on NVIDIA's TitanX Pascal GPU
The software libraries (e.g. cuDNN, OpenMPI) used to benchmark performance are mentioned in each of Excel workbooks in Specs sheet.
Please feel free to ask us any clarifying questions.
Results on more hardware platforms will be added once they are available. We welcome contributions from all hardware vendors.
| Kernel | A Transpose | B Transpose | Application | Results (ms) | TeraFLOPS | Processor |
|---|---|---|---|---|---|---|
| M=1760, N=128, K=1760 | N | N | Speech Recognition | 0.17 | 4.66 | TitanX Pascal |
| M=7860, N=64, K=2560 | N | N | Speech Recognition | 0.42 | 5.94 | TitanX Pascal |
| M=2560, N=64, K=2560 | N | N | Speech Recognition | 0.28 | 3.02 | TitanX Pascal |
| M=5124, N=9124, K=2560 | T | N | Speech Recognition | 55.17 | 4.34 | Xeon Phi 7250 |
| M=3072, N=128, K=1024 | T | N | Speech Recognition | 0.28 | 2.87 | TitanX Pascal |
| Input Size | Filter Size | # of Filters | Padding (h, w) | Stride (h, w) | Application | Total Time (ms) | Fwd TeraFLOPS | Processor |
|---|---|---|---|---|---|---|---|---|
| W = 700, H = 161, C = 1, N = 32 | R = 5, S = 20 | 32 | 0, 0 | 2, 2 | Speech Recognition | 2.98 | 6.63 | TitanX Pascal |
| W = 54, H = 54, C = 64, N = 8 | R = 3, S = 3 | 64 | 1, 1 | 1, 1 | Face Recognition | 0.63 | 10.55 | TitanX Pascal |
| W = 224, H = 224, C = 3, N = 16 | R = 3, S = 3 | 64 | 1, 1 | 1, 1 | Computer Vision | 3.99 | 3.6 | TitanX Pascal |
| W = 7, H = 7, C = 512, N = 16 | R = 3, S = 3 | 512 | 1, 1 | 1, 1 | Computer Vision | 2.93 | 5.88 | TitanX Pascal |
| W = 28, H = 28, C = 192, N = 16 | R = 5, S = 5 | 32 | 2, 2 | 1, 1 | Computer Vision | 1.57 | 6.59 | TitanX Pascal |
The recurrent op kernels are only run on NVIDIA hardware. The recurrent benchmarks will be run on Intel hardware shortly. Results should be available in October.
| Hidden Units | Batch Size | TimeSteps | Recurrent Type | Application | Total Time | Fwd TeraFLOPS | Processor |
|---|---|---|---|---|---|---|---|
| 1760 | 64 | 50 | Vanilla | Speech Recognition | 8.48 | 1.14 | TitanX Pascal |
| 2560 | 32 | 50 | Vanilla | Speech Recognition | 24.69 | 1.69 | TitanX Pascal |
| 1024 | 128 | 25 | LSTM | Machine Translation | 16.90 | 5.41 | TitanX Pascal |
We couldn't run the All-Reduce benchmark on NVIDIA's TitanX Pascal GPU since we only had a single Pascal GPU.
| Size (# of floats) | Number of Processors | Application | Result (ms) | Bandwidth (GB/s) | Processor |
|---|---|---|---|---|---|
| 16777216 | 8 | Speech Recognition | 22.06 | 24.34 | TitanX Maxwell with InfiniBand FDR |
| 16777216 | 16 | Speech Recognition | 53.76 | 19.97 | Xeon Phi 7250 with Intel® Omni-Path |
| 16777216 | 32 | Speech Recognition | 55.68 | 38.57 | Xeon Phi 7250 with Intel® Omni-Path |
We welcome contributions from the community to DeepBench. You can contribute in two ways:
- Deep Learning Researchers/Engineers: If you are deep learning researcher or engineer working on a new deep learning application, you may have different operations and/or workloads involved in training your model. We are interested in learning more about the underlying operations that are adversely impacting the performance (speed) of your model. Please contribute these operations and workloads!
- Hardware Vendors: We would gladly accept contributions from other hardware vendors. We're open to accepting benchmark results from large companies or smaller startups building hardware for training deep learning models. Please contribute benchmark results for your hardware!
To get the code, simply clone the github repo
git clone https://github.com/baidu-research/DeepBench
In order to build the benchmarks, you will need to specify the following paths:
MPI_PATH: Path to MPI library. The benchmarks have been tested with OpenMPI version 1.10.2.
CUDA_PATH: Path to CUDA library. The benchmarks have been tested with version 7.5.18.
CUDNN_PATH: Path to CUDNN library. The benchmarks have been tested with version 5.0.
NCCL_PATH: Path to NCCL library. NCCL library is available at https://github.com/NVIDIA/nccl. The benchmarks have been tested with commit b3a9e1333d9e2e1b8553b5843ba1ba4f7c79739d
To build all the benchmarks, please use the following command:
cd code/
make CUDA_PATH=<cuda_path> CUDNN_PATH=<cudnn_path> MPI_PATH=<mpi_path> NCCL_PATH=<nccl_path>
You need to build the code for the appropriate architecture. By default, the architecture version is set to 5.2. This works for the TitanX and Tesla M40 GPU. In order build the benchmark for another architecture (such as Pascal with version 6.1), please append the following variable to the make command:
ARCH=sm_61 ## Just an example for Pascal architecture
Once compilation completes successfully, the executables will be
generated in the bin directory. Before executing the benchmarks, it
is important to set your LD_LIBRARY_PATH correctly. For bash shells,
please use:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:<cuda_path>:<cudnn_path>:<mpi_path>:<nccl_path>
The GEMM, convolution and recurrent benchmarks can be run by calling the respective executables. Here is some of the output from the GEMM benchmark:
~/DeepBench/code$ bin/gemm_bench
Times
----------------------------------------------------------------------------------------
m n k a_t b_t time (usec)
1760 16 1760 0 0 266
1760 32 1760 0 0 269
1760 64 1760 0 0 290
1760 128 1760 0 0 431
To execute the NCCL single All-Reduce benchmark, you need to specify the number of GPUs as an argument. Please note that the number of GPUs must not be greater than the number of GPUs visible in your system.
bin/nccl_single_all_reduce <num_gpus>
The NCCL MPI All-Reduce benchmark can be run using mpirun as shown below:
mpirun -np <num_ranks> bin/nccl_mpi_all_reduce
num_ranks cannot be greater than the number of GPUs in the system.
The osu_allreduce benchmark can be executed using mpirun as follows:
mpirun -np <num_processes> bin/osu_allreduce
The osu_allreduce benchmark can be run with more processes than
GPUs. However, all our experiments were conducted with each process
running on a single GPU.
Source all the Intel tools (icc, mkl, mpi) into the path
source <icc_installdir>/bin/compilervars.sh intel64
source <mkl_installdir>/bin/mklvars.sh intel64
source <impi_installdir>/bin/mpivars.sh intel64
Running the Intel GEMM benchmark (MKL 2017)
code/intel/sgemm/run_mkl_sgemm_ia.sh
Running the Intel convolution benchmark (MKL 2017 and libxsmm (open source KNL optimized convolution implementation))
code/intel/convolution/run_conv_ia.sh
Running the Intel All-Reduce benchmark (Uses the standard OSU benchmark compiled/running with Intel MPI)
code/osu_allreduce/run_allreduce_ia.sh <osu_allreduce binary> <hostfile>