Not working with Windows 10 1803

[rayzhu2025]

Before in Windows 10 1709, no problem. After updating, VPN cannot be connected. Tried the setting again but still failed. Looking forward to a solution. Thanks much!

[hwdsl2]

@rayzhu2025 Hello! Please provide the Libreswan/xl2tpd logs for further troubleshooting. See [1].

[1] https://github.com/hwdsl2/setup-ipsec-vpn/blob/master/docs/clients.md#additional-steps

[rayzhu2025]

I will try. Lin Song <notifications@github.com>于2018年5月2日 周三下午2:32写道：

…

@byf6663 <https://github.com/byf6663> Hello! Please provide the Libreswan/xl2tpd logs for further troubleshooting. See [1]. [1] https://github.com/hwdsl2/setup-ipsec-vpn/blob/master/docs/clients.md#additional-steps — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#376 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYYDaQaKkzMVIAqdc_PoZFdvxa-XWXDNks5tuVMJgaJpZM4TtkN3> .

[trixiefine]

auth.log
syslog.txt

Confirmed Windows 10 client 1709 version connects.

Windows 10 client version 1803 fails.

Android client connects normally as well.

[rayzhu2025]

yup. Any solution?

[hwdsl2]

@rayzhu2025 Hello! The logs from @trixiefine indicate that you may need to re-apply the Windows Error 809 fix [1]. The windows update process from 1709 to 1803 most likely have reset or removed this registry key. Try re-applying the fix, reboot your PC, then re-connect the VPN. Let us know if it works.

[1] https://github.com/hwdsl2/setup-ipsec-vpn/blob/master/docs/clients.md#windows-error-809

[rayzhu2025]

Thank you! I have tried that. Still not working....

[thereisnotime]

Won't the Windows registry fix make the connection less secure? @hwdsl2

[hwdsl2]

@thereisnotime No, AFAIK it won’t affect the connection security in general.

[Agraphie]

I can confirm that it's not working anymore for me either and re-applying the fix mentioned above did not solve the problem.

[Agraphie]

Have you tried adding your VPN connection completely again? It seems that old connections were not successfully migrated. For me it started working again after adding a new vpn connection with the same credentials and everything as the one I already had (the migrate one from before the update).

[SystemDisc]

I'm also experiencing this issue. Applying the fix and rebooting does not resolve it.

[SystemDisc]

I did get it working after the command here: #347 (comment)

netsh winsock reset

However, soon afterward, I ran into this problem (all tickets for the same thing):

• Can not connect new client if there is an existing client session with the same IP #378
• Shrew VPN Clients kicking each other off #314
• Multiple clients not works #323
• IPsec/XAuth multi connection with same IP #357
• IPsec/XAuth reusing lease for multiple clients behind same NAT libreswan/libreswan#166

[rayzhu2025]

Not a fan of PPTPD...

…

On Sun, May 20, 2018 at 12:07 AM, Zorn ***@***.***> wrote: I did get it working after the command here: #347 (comment) <#347 (comment)> netsh winsock reset However, soon afterward, I ran into this problem (all tickets for the same thing): #378 <#378> #314 <#314> #323 <#323> #357 <#357> libreswan/libreswan#166 <libreswan/libreswan#166> — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#376 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYYDafOVA_Gv6URWAKs-u6VaJdTpeLchks5t0EM1gaJpZM4TtkN3> .

[MikeLund]

@wangzhenjjcn PPTP is insecure. Don't use it, unless there are no alternatives.

[trixiefine]

netsh winsock reset

Still no luck - same error after resetting, removing, recreating and rebooting (including registry change).

[rayzhu2025]

yeah. Any body knows how to crack this issue?

[pillboxru]

in ipsec.conf try to change encapsulation=auto
it helps for me to use vpn with error 809 withot any registry changes

[Suleman-Elahi]

Running on Windows 10 1803 after applying the registry fix.... thanks.!!!

what i don't understand is that my location that I see is US on Whoer.net but my droplet is hosted in London !!!!

How to change that ???

[narcisse07]

fixed my issue

1. Open your Windows Registry Editor by typing regedit in the Search Windows area.

2. Browse to the Registry Key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CVirtA or you many have 1. Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva

3. From the window on the right, select and right-click on DisplayName and choose Modify from the menu. Alternatively, double-click on DisplayName: 3. Change the value to this “ Cisco Systems VPN Adapter for 64-bit Windows”