netx

Studying golang for me! :)

---

---

This repo is just used for go-lang sutdy, you may use command 'next' to do:

1. List all interfaces in the host: ./netx listif

2. Capture packets from a specific interface: ./netx rx -i ./netx rx --ifname

3. arpflood: ./netx arpflood -i 4
   --src-mac=00:11:22:33:44:55
   --dest-mac=00:55:44:33:22:11
   --arp-src-mac=00:12:34:56:78:90
   --arp-target-mac=00:90:78:56:34:21
   --arp-src-ip=192.168.11.11
   --arp-target-ip=102.168.11.22
   -c 10

4. pingflood: ./netx pingflood -i 4
   --src-mac=00:11:22:33:44:55
   --dest-mac=00:55:44:33:22:11
   --src-ip=192.168.11.11
   --dest-ip=102.168.11.22

5. synflood: ./netx synflood -i 4
   --src-mac=00:11:22:33:44:55
   --dest-mac=00:55:44:33:22:11
   --src-ip=192.168.11.11
   --dest-ip=102.168.11.22
   --src-port 11111
   --dest-port=22222

6. tx a packet: ./netx tx -i 4
   -p 005544332211001122334455080045000032abcd400080061187c0a80b0b66a80b162b6756ce1234567887654321500260005cfe000000000000000000000000

NOTE: option '-i' is used to specify an interface by index, the index is the order in output of './netx dump -l', you may use option '--ifname' to specify an interface by interface name.