Split out a Settings struct from Config

h3-webtransport/src/server.rs

@@ -84,15 +84,15 @@ where
         //
         // However, it is still advantageous to show a log on the server as (attempting) to
         // establish a WebTransportSession without the proper h3 config is usually a mistake.
-        if !conn.inner.config.enable_webtransport() {
+        if !conn.inner.config.settings.enable_webtransport() {
             tracing::warn!("Server does not support webtransport");
         }
 
-        if !conn.inner.config.enable_datagram() {
+        if !conn.inner.config.settings.enable_datagram() {
             tracing::warn!("Server does not support datagrams");
         }
 
-        if !conn.inner.config.enable_extended_connect() {
+        if !conn.inner.config.settings.enable_extended_connect() {
             tracing::warn!("Server does not support CONNECT");
         }
 

h3/src/client.rs

@@ -506,7 +506,7 @@ impl Builder {
     ///
     /// [header size constraints]: https://www.rfc-editor.org/rfc/rfc9114.html#name-header-size-constraints
     pub fn max_field_section_size(&mut self, value: u64) -> &mut Self {
-        self.config.max_field_section_size = value;
+        self.config.settings.max_field_section_size = value;
         self
     }
 
@@ -544,7 +544,7 @@ impl Builder {
                 open,
                 conn_state,
                 conn_waker,
-                max_field_section_size: self.config.max_field_section_size,
+                max_field_section_size: self.config.settings.max_field_section_size,
                 sender_count: Arc::new(AtomicUsize::new(1)),
                 send_grease_frame: self.config.send_grease,
                 _buf: PhantomData,

h3/src/config.rs

@@ -1,4 +1,6 @@
-use crate::proto::varint::VarInt;
+use std::convert::TryFrom;
+
+use crate::proto::{frame, varint::VarInt};
 
 /// Configures the HTTP/3 connection
 #[derive(Debug, Clone, Copy)]
@@ -13,6 +15,13 @@ pub struct Config {
     #[cfg(test)]
     pub(crate) send_settings: bool,
 
+    /// HTTP/3 Settings
+    pub settings: Settings,
+}
+
+/// HTTP/3 Settings
+#[derive(Debug, Clone, Copy)]
+pub struct Settings {
     /// The MAX_FIELD_SECTION_SIZE in HTTP/3 refers to the maximum size of the dynamic table used in HPACK compression.
     /// HPACK is the compression algorithm used in HTTP/3 to reduce the size of the header fields in HTTP requests and responses.
 
@@ -34,7 +43,107 @@ pub struct Config {
     pub(crate) max_webtransport_sessions: u64,
 }
 
-impl Config {
+impl From<&frame::Settings> for Settings {
+    fn from(settings: &frame::Settings) -> Self {
+        let defaults: Self = Default::default();
+        Self {
+            max_field_section_size: settings
+                .get(frame::SettingId::MAX_HEADER_LIST_SIZE)
+                .unwrap_or(defaults.max_field_section_size),
+            enable_webtransport: settings
+                .get(frame::SettingId::ENABLE_WEBTRANSPORT)
+                .map(|value| value != 0)
+                .unwrap_or(defaults.enable_webtransport),
+            max_webtransport_sessions: settings
+                .get(frame::SettingId::WEBTRANSPORT_MAX_SESSIONS)
+                .unwrap_or(defaults.max_webtransport_sessions),
+            enable_datagram: settings
+                .get(frame::SettingId::H3_DATAGRAM)
+                .map(|value| value != 0)
+                .unwrap_or(defaults.enable_datagram),
+            enable_extended_connect: settings
+                .get(frame::SettingId::ENABLE_CONNECT_PROTOCOL)
+                .map(|value| value != 0)
+                .unwrap_or(defaults.enable_extended_connect),
+        }
+    }
+}
+
+impl TryFrom<Config> for frame::Settings {
+    type Error = frame::SettingsError;
+    fn try_from(value: Config) -> Result<Self, Self::Error> {
+        let mut settings = frame::Settings::default();
+
+        let Config {
+            send_grease,
+            #[cfg(test)]
+                send_settings: _,
+            settings:
+                Settings {
+                    max_field_section_size,
+                    enable_webtransport,
+                    enable_extended_connect,
+                    enable_datagram,
+                    max_webtransport_sessions,
+                },
+        } = value;
+
+        if send_grease {
+            //  Grease Settings (https://www.rfc-editor.org/rfc/rfc9114.html#name-defined-settings-parameters)
+            //= https://www.rfc-editor.org/rfc/rfc9114#section-7.2.4.1
+            //# Setting identifiers of the format 0x1f * N + 0x21 for non-negative
+            //# integer values of N are reserved to exercise the requirement that
+            //# unknown identifiers be ignored.  Such settings have no defined
+            //# meaning.  Endpoints SHOULD include at least one such setting in their
+            //# SETTINGS frame.
+
+            //= https://www.rfc-editor.org/rfc/rfc9114#section-7.2.4.1
+            //# Setting identifiers that were defined in [HTTP/2] where there is no
+            //# corresponding HTTP/3 setting have also been reserved
+            //# (Section 11.2.2).  These reserved settings MUST NOT be sent, and
+            //# their receipt MUST be treated as a connection error of type
+            //# H3_SETTINGS_ERROR.
+            match settings.insert(frame::SettingId::grease(), 0) {
+                Ok(_) => (),
+                Err(err) => tracing::warn!("Error when adding the grease Setting. Reason {}", err),
+            }
+        }
+
+        settings.insert(
+            frame::SettingId::MAX_HEADER_LIST_SIZE,
+            max_field_section_size,
+        )?;
+        settings.insert(
+            frame::SettingId::ENABLE_CONNECT_PROTOCOL,
+            enable_extended_connect as u64,
+        )?;
+        settings.insert(
+            frame::SettingId::ENABLE_WEBTRANSPORT,
+            enable_webtransport as u64,
+        )?;
+        settings.insert(frame::SettingId::H3_DATAGRAM, enable_datagram as u64)?;
+        settings.insert(
+            frame::SettingId::WEBTRANSPORT_MAX_SESSIONS,
+            max_webtransport_sessions,
+        )?;
+
+        Ok(settings)
+    }
+}
+
+impl Default for Settings {
+    fn default() -> Self {
+        Self {
+            max_field_section_size: VarInt::MAX.0,
+            enable_webtransport: false,
+            enable_extended_connect: false,
+            enable_datagram: false,
+            max_webtransport_sessions: 0,
+        }
+    }
+}
+
+impl Settings {
     /// https://datatracker.ietf.org/doc/html/draft-ietf-webtrans-http3/#section-3.1
     /// Sets `SETTINGS_ENABLE_WEBTRANSPORT` if enabled
     pub fn enable_webtransport(&self) -> bool {
@@ -58,14 +167,10 @@ impl Config {
 impl Default for Config {
     fn default() -> Self {
         Self {
-            max_field_section_size: VarInt::MAX.0,
             send_grease: true,
             #[cfg(test)]
             send_settings: true,
-            enable_webtransport: false,
-            enable_extended_connect: false,
-            enable_datagram: false,
-            max_webtransport_sessions: 0,
+            settings: Default::default(),
         }
     }
 }

h3/src/connection.rs

@@ -11,11 +11,11 @@ use stream::WriteBuf;
 use tracing::{trace, warn};
 
 use crate::{
-    config::Config,
+    config::{Config, Settings},
     error::{Code, Error},
     frame::FrameStream,
     proto::{
-        frame::{Frame, PayloadLen, SettingId, Settings},
+        frame::{self, Frame, PayloadLen},
         headers::Header,
         stream::StreamType,
         varint::VarInt,
@@ -30,7 +30,7 @@ use crate::{
 #[non_exhaustive]
 pub struct SharedState {
     // Peer settings
-    pub peer_config: Config,
+    pub peer_config: Settings,
     // connection-wide error, concerns all RequestStreams and drivers
     pub error: Option<Error>,
     // Has a GOAWAY frame been sent or received?
@@ -54,7 +54,7 @@ impl SharedStateRef {
 impl Default for SharedStateRef {
     fn default() -> Self {
         Self(Arc::new(RwLock::new(SharedState {
-            peer_config: Config::default(),
+            peer_config: Default::default(),
             error: None,
             closing: false,
         })))
@@ -148,54 +148,11 @@ where
             return Ok(());
         }
 
-        let mut settings = Settings::default();
-
-        settings
-            .insert(
-                SettingId::MAX_HEADER_LIST_SIZE,
-                self.config.max_field_section_size,
-            )
-            .map_err(|e| Code::H3_INTERNAL_ERROR.with_cause(e))?;
-
-        settings
-            .insert(
-                SettingId::ENABLE_CONNECT_PROTOCOL,
-                self.config.enable_extended_connect as u64,
-            )
-            .map_err(|e| Code::H3_INTERNAL_ERROR.with_cause(e))?;
-        settings
-            .insert(
-                SettingId::ENABLE_WEBTRANSPORT,
-                self.config.enable_webtransport as u64,
-            )
-            .map_err(|e| Code::H3_INTERNAL_ERROR.with_cause(e))?;
-        settings
-            .insert(SettingId::H3_DATAGRAM, self.config.enable_datagram as u64)
+        let settings = frame::Settings::try_from(self.config)
             .map_err(|e| Code::H3_INTERNAL_ERROR.with_cause(e))?;
 
         tracing::debug!("Sending server settings: {:#x?}", settings);
 
-        if self.config.send_grease {
-            //  Grease Settings (https://www.rfc-editor.org/rfc/rfc9114.html#name-defined-settings-parameters)
-            //= https://www.rfc-editor.org/rfc/rfc9114#section-7.2.4.1
-            //# Setting identifiers of the format 0x1f * N + 0x21 for non-negative
-            //# integer values of N are reserved to exercise the requirement that
-            //# unknown identifiers be ignored.  Such settings have no defined
-            //# meaning.  Endpoints SHOULD include at least one such setting in their
-            //# SETTINGS frame.
-
-            //= https://www.rfc-editor.org/rfc/rfc9114#section-7.2.4.1
-            //# Setting identifiers that were defined in [HTTP/2] where there is no
-            //# corresponding HTTP/3 setting have also been reserved
-            //# (Section 11.2.2).  These reserved settings MUST NOT be sent, and
-            //# their receipt MUST be treated as a connection error of type
-            //# H3_SETTINGS_ERROR.
-            match settings.insert(SettingId::grease(), 0) {
-                Ok(_) => (),
-                Err(err) => warn!("Error when adding the grease Setting. Reason {}", err),
-            }
-        }
-
         //= https://www.rfc-editor.org/rfc/rfc9114#section-3.2
         //# After the QUIC connection is
         //# established, a SETTINGS frame MUST be sent by each endpoint as the
@@ -395,7 +352,9 @@ where
                         );
                     }
                 }
-                AcceptedRecvStream::WebTransportUni(id, s) if self.config.enable_webtransport => {
+                AcceptedRecvStream::WebTransportUni(id, s)
+                    if self.config.settings.enable_webtransport =>
+                {
                     // Store until someone else picks it up, like a webtransport session which is
                     // not yet established.
                     self.accepted_streams.wt_uni_streams.push((id, s))
@@ -465,24 +424,7 @@ where
                         //# Endpoints MUST NOT consider such settings to have
                         //# any meaning upon receipt.
                         let mut shared = self.shared.write("connection settings write");
-                        shared.peer_config.max_field_section_size = settings
-                            .get(SettingId::MAX_HEADER_LIST_SIZE)
-                            .unwrap_or(VarInt::MAX.0);
-
-                        shared.peer_config.enable_webtransport =
-                            settings.get(SettingId::ENABLE_WEBTRANSPORT).unwrap_or(0) != 0;
-
-                        shared.peer_config.max_webtransport_sessions = settings
-                            .get(SettingId::WEBTRANSPORT_MAX_SESSIONS)
-                            .unwrap_or(0);
-
-                        shared.peer_config.enable_datagram =
-                            settings.get(SettingId::H3_DATAGRAM).unwrap_or(0) != 0;
-
-                        shared.peer_config.enable_extended_connect = settings
-                            .get(SettingId::ENABLE_CONNECT_PROTOCOL)
-                            .unwrap_or(0)
-                            != 0;
+                        shared.peer_config = (&settings).into();
 
                         Ok(Frame::Settings(settings))
                     }

h3/src/server.rs

@@ -568,7 +568,7 @@ impl Builder {
     ///
     /// [header size constraints]: https://www.rfc-editor.org/rfc/rfc9114.html#name-header-size-constraints
     pub fn max_field_section_size(&mut self, value: u64) -> &mut Self {
-        self.config.max_field_section_size = value;
+        self.config.settings.max_field_section_size = value;
         self
     }
 
@@ -590,27 +590,27 @@ impl Builder {
     /// and `max_webtransport_sessions`.
     #[inline]
     pub fn enable_webtransport(&mut self, value: bool) -> &mut Self {
-        self.config.enable_webtransport = value;
+        self.config.settings.enable_webtransport = value;
         self
     }
 
     /// Enables the CONNECT protocol
     pub fn enable_connect(&mut self, value: bool) -> &mut Self {
-        self.config.enable_extended_connect = value;
+        self.config.settings.enable_extended_connect = value;
         self
     }
 
     /// Limits the maximum number of WebTransport sessions
     pub fn max_webtransport_sessions(&mut self, value: u64) -> &mut Self {
-        self.config.max_webtransport_sessions = value;
+        self.config.settings.max_webtransport_sessions = value;
         self
     }
 
     /// Indicates that the client or server supports HTTP/3 datagrams
     ///
     /// See: <https://www.rfc-editor.org/rfc/rfc9297#section-2.1.1>
     pub fn enable_datagram(&mut self, value: bool) -> &mut Self {
-        self.config.enable_datagram = value;
+        self.config.settings.enable_datagram = value;
         self
     }
 }
@@ -627,7 +627,7 @@ impl Builder {
         let (sender, receiver) = mpsc::unbounded_channel();
         Ok(Connection {
             inner: ConnectionInner::new(conn, SharedStateRef::default(), self.config).await?,
-            max_field_section_size: self.config.max_field_section_size,
+            max_field_section_size: self.config.settings.max_field_section_size,
             request_end_send: sender,
             request_end_recv: receiver,
             ongoing_streams: HashSet::new(),