Skip to content

Commit

Permalink
[FAB-2803] Update e2e readme to reflect TLS change
Browse files Browse the repository at this point in the history 
https://jira.hyperledger.org/browse/FAB-2803

Updating the documentation for the end-to-end example to reflect the
TLS changes, which the automated script exercises.

Also, updating other commands in the readme to follow the script.

Change-Id: If73345554b6c23efa0af3f4854592a955bc95ebe
Signed-off-by: Adnan Choudhury <adnan.choudhury@itpeoplecorp.com>
  • Loading branch information
@adnan-c
adnan-c committed Mar 17, 2017
1 parent 14055d7 commit 9c39b17
Showing 1 changed file with 47 additions and 47 deletions.
94 changes: 47 additions & 47 deletions examples/e2e_cli/end-to-end.rst
View file
Expand Up @@ -141,8 +141,8 @@ directory.
configtxgen -profile TwoOrgs -outputCreateChannelTx <cfg txn name> -channelID <channel-id>
# example: configtxgen -profile TwoOrgs -outputCreateChannelTx channel.tx -channelID mychannel
Run the end-to-end test
-----------------------
Run the end-to-end test with Docker
-----------------------------------

Make sure you are in the ``/e2e_cli`` directory. Then use docker-compose
to spawn the network entities and drive the tests.
Expand Down Expand Up @@ -305,8 +305,8 @@ output from each container:
ex02 Invoke
Query Response:{"Name":"a","Amount":"90"}
Manually create the channel and join peers through CLI
------------------------------------------------------
Run the end-to-end test manually with Docker
--------------------------------------------

From your vagrant environment exit the currently running containers:

Expand Down Expand Up @@ -369,15 +369,18 @@ Command syntax

Refer to the create and join commands in the ``script.sh``.

For any of the following commands to work, you need to preface the
commands with the following environment variables.
For the following CLI commands against `peer0` to work, you need to set the
values for four environment variables, given below. Please make sure to override
the values accordingly when calling commands against other peers and the
orderer.

.. code:: bash
# Environment variables for PEER0
CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peer/peer0/localMspConfig
CORE_PEER_ADDRESS=peer0:7051
CORE_PEER_LOCALMSPID="Org0MSP"
CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peer/peer0/localMspConfig/cacerts/peerOrg0.pem
These environment variables for each peer are defined in the supplied
docker-compose file.
Expand Down Expand Up @@ -406,18 +409,20 @@ with a different name.
# the channel.tx and orderer.block are mounted in the crypto/orderer folder within your cli container
# as a result, we pass the full path for the file
peer channel create -o orderer:7050 -c mychannel -f crypto/orderer/channel.tx
peer channel create -o orderer0:7050 -c mychannel -f crypto/orderer/channel.tx --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem
Recall that the environment variables are required for this manual
operation. So the command in its entirety would be:
Since the `channel create` runs against the orderer, we need to override the
four environment variables set before. So the above command in its entirety would be:

.. code:: bash
CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peer/peer0/localMspConfig CORE_PEER_ADDRESS=peer0:7051 CORE_PEER_LOCALMSPID="Org0MSP" peer channel create -o orderer:7050 -c mychannel -f crypto/orderer/channel.tx
CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig CORE_PEER_LOCALMSPID="OrdererMSP" peer channel create -o orderer0:7050 -c mychannel -f crypto/orderer/channel.tx --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem
**Note**: You will remain in the CLI container for the remainder of
these manual commands. You must also remember to preface all commands
with the corresponding env variables for the targeted peer.
with the corresponding environment variables for targetting a peer other than
`peer0`.

Join channel
^^^^^^^^^^^^
Expand All @@ -426,14 +431,12 @@ Join specific peers to the channel

.. code:: bash
# By default, this joins PEER0 only
# the mychannel.block is also mounted in the crypto/orderer directory
peer channel join -b mychannel.block
This command in its entirety would be:

.. code:: bash
CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peer/peer0/localMspConfig CORE_PEER_ADDRESS=peer0:7051 CORE_PEER_LOCALMSPID="Org0MSP" peer channel join -b crypto/orderer/mychannel.block
You can make other peers join the channel as necessary by making appropriate
changes in the four environment variables.

Install chaincode onto a remote peer
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Expand All @@ -450,13 +453,12 @@ Instantiate chaincode and define the endorsement policy
Instantiate the chaincode on a peer. This will launch a chaincode
container for the targeted peer and set the endorsement policy for the
chaincode. In this snippet, we define the policy as requiring an
endorsement from one peer node that is a part of Org1. In our scenario,
this is ``PEER2`` or ``PEER3``
endorsement from one peer node that is a part of either `Org0` or `Org1`.
The command is:

.. code:: bash
#
peer chaincode instantiate -o orderer:7050 -C mychannel -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02 -c '{"Args":["init","a", "100", "b","200"]}' -P "AND('Org1MSP.member')"
peer chaincode instantiate -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02 -c '{"Args":["init","a", "100", "b","200"]}' -P "OR ('Org0MSP.member','Org1MSP.member')"
See the `endorsement
policies <http://hyperledger-fabric.readthedocs.io/en/latest/endorsement-policies/>`__
Expand All @@ -467,7 +469,7 @@ Invoke chaincode

.. code:: bash
peer chaincode invoke -o orderer:7050 -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'
**NOTE**: Make sure to wait a few seconds for the operation to complete.

Expand All @@ -484,8 +486,8 @@ The result of the above command should be as below:
Query Result: 90
Using the native binaries
-------------------------
Run the end-to-end test using the native binaries
-------------------------------------------------

Open your vagrant environment:

Expand Down Expand Up @@ -568,7 +570,7 @@ Ask peer to create a channel with the configuration parameters in

.. code:: bash
peer channel create -o orderer:7050 -c mychannel -f channel.tx
peer channel create -o 127.0.0.1:7050 -c mychannel -f channel.tx
This will return a channel genesis block - ``mychannel.block`` - in your
current directory.
Expand All @@ -589,7 +591,7 @@ Install chaincode on the peer:

.. code:: bash
peer chaincode install -o orderer:7050 -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02
peer chaincode install -o 127.0.0.1:7050 -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02
Make sure the chaincode is in the filesystem:

Expand All @@ -606,7 +608,7 @@ Instantiate the chaincode:

.. code:: bash
peer chaincode instantiate -o orderer:7050 -C mychannel -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02 -c '{"Args":["init","a", "100", "b","200"]}'
peer chaincode instantiate -o 127.0.0.1:7050 -C mychannel -n mycc -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02 -c '{"Args":["init","a", "100", "b","200"]}'
Check your active containers:

Expand All @@ -628,7 +630,7 @@ Issue an invoke to move "10" from "a" to "b":

.. code:: bash
peer chaincode invoke -o orderer:7050 -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'
peer chaincode invoke -o 127.0.0.1:7050 -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'
Wait a few seconds for the operation to complete

Expand All @@ -640,7 +642,7 @@ Query for the value of "a":
.. code:: bash
# this should return 90
peer chaincode query -o orderer:7050 -C mychannel -n mycc -c '{"Args":["query","a"]}'
peer chaincode query -o 127.0.0.1:7050 -C mychannel -n mycc -c '{"Args":["query","a"]}'
Don't forget to clear ledger folder ``/var/hyperledger/`` after each
run!
Expand Down Expand Up @@ -691,29 +693,27 @@ capabilities you will need to use a chaincode that has data modeled as JSON,

Install, instantiate, invoke, and query *marbles02* chaincode by following the
same general steps outlined above for *chaincode_example02* in the **Manually
create the channel and join peers through CLI** section . After the **Join
create the channel and join peers through CLI** section. After the **Join
channel** step, use the following steps to interact with the *marbles02*
chaincode:
chaincode:

- Install and instantiate the chaincode in ``peer0`` (replace ``$ORDERER_IP``
with the IP address of the orderer. One way to find the address is with the
command ``docker inspect orderer | grep \"IPAddress\"``):
- Install and instantiate the chaincode in ``peer0``:

.. code:: bash
peer chaincode install -o $ORDERER_IP:7050 -n marbles -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/marbles02
peer chaincode instantiate -o $ORDERER_IP:7050 -C $mychannel -n marbles -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/marbles02 -c '{"Args":["init"]}' -P "OR ('Org0MSP.member','Org1MSP.member')"
peer chaincode install -o orderer0:7050 -n marbles -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/marbles02
peer chaincode instantiate -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -v 1.0 -p github.com/hyperledger/fabric/examples/chaincode/go/marbles02 -c '{"Args":["init"]}' -P "OR ('Org0MSP.member','Org1MSP.member')"
- Create some marbles and move them around:

.. code:: bash
peer chaincode invoke -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["initMarble","marble1","blue","35","tom"]}'
peer chaincode invoke -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["initMarble","marble2","red","50","tom"]}'
peer chaincode invoke -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["initMarble","marble3","blue","70","tom"]}'
peer chaincode invoke -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["transferMarble","marble2","jerry"]}'
peer chaincode invoke -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["transferMarblesBasedOnColor","blue","jerry"]}'
peer chaincode invoke -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["delete","marble1"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -c '{"Args":["initMarble","marble1","blue","35","tom"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -c '{"Args":["initMarble","marble2","red","50","tom"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -c '{"Args":["initMarble","marble3","blue","70","tom"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -c '{"Args":["transferMarble","marble2","jerry"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -c '{"Args":["transferMarblesBasedOnColor","blue","jerry"]}'
peer chaincode invoke -o orderer0:7050 --tls $CORE_PEER_TLS_ENABLED --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/orderer/localMspConfig/cacerts/ordererOrg0.pem -C mychannel -n marbles -c '{"Args":["delete","marble1"]}'
Expand All @@ -723,12 +723,12 @@ chaincode:

For containers running in a vagrant environment:

```http://localhost:15984/_utils```
``http://localhost:15984/_utils``

For non-vagrant environment, use the port address that was mapped in CouchDB
container specification:

```http://localhost:5984/_utils```
``http://localhost:5984/_utils``

You should see a database named ``mychannel`` and the documents
inside it.
Expand All @@ -737,7 +737,7 @@ chaincode:

.. code:: bash
peer chaincode query -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["readMarble","marble2"]}'
peer chaincode query -C mychannel -n marbles -c '{"Args":["readMarble","marble2"]}'
You should see the details of ``marble2``:
Expand All @@ -751,7 +751,7 @@ chaincode:

.. code:: bash
peer chaincode query -o $ORDERER_IP:7050 -C mychannel -n marbles -c '{"Args":["getHistoryForMarble","marble1"]}'
peer chaincode query -C mychannel -n marbles -c '{"Args":["getHistoryForMarble","marble1"]}'
You should see the transactions on ``marble1``:

Expand All @@ -765,7 +765,7 @@ chaincode:

.. code:: bash
peer chaincode query -o $ORDERER_IP:7050 -C myc1 -n marbles -c '{"Args":["queryMarblesByOwner","jerry"]}'
peer chaincode query -C mychannel -n marbles -c '{"Args":["queryMarblesByOwner","jerry"]}'
The output should display the two marbles owned by ``jerry``:

Expand All @@ -777,7 +777,7 @@ chaincode:

.. code:: bash
peer chaincode query -o $ORDERER_IP:7050 -C myc1 -n marbles -c '{"Args":["queryMarbles","{\"selector\":{\"owner\":\"jerry\"}}"]}'
peer chaincode query -C mychannel -n marbles -c '{"Args":["queryMarbles","{\"selector\":{\"owner\":\"jerry\"}}"]}'
The output should display:

Expand Down

0 comments on commit 9c39b17

Please sign in to comment.