o improve indentation.

hzeller · Sep 26, 2012 · 4185e88 · 4185e88
1 parent bc3d132
commit 4185e88
Showing 1 changed file with 32 additions and 33 deletions.
diff --git a/INSTALL.md b/INSTALL.md
@@ -3,17 +3,17 @@
 On a reasonably fresh system (e.g. Ubuntu 11.10 and 12.04), installation is
 straightforward. To compile, this is what you need to do:
 
-    sudo apt-get install libsndfile-dev libflac-dev libzita-convolver-dev \
-                         libfuse-dev libboost-thread-dev libmicrohttpd-dev
-    make
+        sudo apt-get install libsndfile-dev libflac-dev libzita-convolver-dev \
+                             libfuse-dev libboost-thread-dev libmicrohttpd-dev
+        make
 
 To install in the default location /usr/local/bin, just do
 
-    sudo make install
+        sudo make install
 
 .. otherwise specify the alternative location with DESTDIR
 
-    sudo make DESTDIR=/usr install
+        sudo make DESTDIR=/usr install
 
 
 
@@ -23,28 +23,28 @@ Older systems, e.g. Ubuntu 10.04 lack sufficiently recent libraries for FUSE
 and the zita convolver. In that case, don't install these with `apt-get`; in
 fact, better remove the old versions to avoid confusion:
 
-    sudo apt-get remove libzita-convolver-dev libfuse-dev
+        sudo apt-get remove libzita-convolver-dev libfuse-dev
 
 .. and compile the latest versions yourself:
 
-    # The FUSE library
-    cd /tmp
-    wget http://sourceforge.net/projects/fuse/files/fuse-2.X/2.9.1/fuse-2.9.1.tar.gz
-    tar xvzf fuse-2.9.1.tar.gz
-    cd fuse-2.9.1/
-    ./configure
-    make
-    sudo make install
+        # The FUSE library
+        cd /tmp
+        wget http://sourceforge.net/projects/fuse/files/fuse-2.X/2.9.1/fuse-2.9.1.tar.gz
+        tar xvzf fuse-2.9.1.tar.gz
+        cd fuse-2.9.1/
+        ./configure
+        make
+        sudo make install
 
 also
 
-    # The Zita convolver
-    cd /tmp
-    wget http://kokkinizita.linuxaudio.org/linuxaudio/downloads/zita-convolver-3.1.0.tar.bz2
-    tar xvjf zita-convolver-3.1.0.tar.bz2
-    cd zita-convolver-3.1.0/libs
-    make
-    sudo make LIBDIR=lib install
+        # The Zita convolver
+        cd /tmp
+        wget http://kokkinizita.linuxaudio.org/linuxaudio/downloads/zita-convolver-3.1.0.tar.bz2
+        tar xvjf zita-convolver-3.1.0.tar.bz2
+        cd zita-convolver-3.1.0/libs
+        make
+        sudo make LIBDIR=lib install
 
 Now, the compilation step described in *Typical installation* should succeed.
 
@@ -56,24 +56,23 @@ To install Folve on some embedded systems, you might need to link it statically.
 This depends a lot on your system, so it might require some twiddeling, but
 let's see the basic steps.
 
-First, you need create a static verssion of the zita-convolver libray; the
-default installation does not provide this. To do so, start first
-with compiling the zita-convolver yourself, as described in the
+First, you need to create a static version of the zita-convolver libray; the
+default installation does not provide this. To do so, first start
+with compiling *The Zita convolver* yourself, as described in the
 *Older Systems* section.
 
 Then run the following commands:
 
-     # .. first run the zita compile commands from above. Then:
-     cd /tmp/zita-convolver-3.1.0/libs
-     ar rcs libzita-convolver.a zita-convolver.o
-     ranlib libzita-convolver.a
-     sudo install -m 644 libzita-convolver.a /usr/local/lib
+        # .. first run the zita compile commands from above. Then:
+        cd /tmp/zita-convolver-3.1.0/libs
+        ar rcs libzita-convolver.a zita-convolver.o
+        ranlib libzita-convolver.a
+        sudo install -m 644 libzita-convolver.a /usr/local/lib
 
-Now we can compile folve statically; go into the folve source directory and
-type
+Now we can compile Folve statically:
 
-     cd /directory/where/folve/git/is/checked/out
-     make LINK_STATIC=y
+        cd /directory/where/folve/git/is/checked/out
+        make LINK_STATIC=y
 
 The last step might fail if there are additional dependencies. Add them in the
 `ifdef LINK_STATIC` section of the Makefile.