Skip to content

Latest commit

 

History

History
118 lines (76 loc) · 5.04 KB

USB Flashing.md

File metadata and controls

118 lines (76 loc) · 5.04 KB
Raw

USB Flashing

Modern flight controllers are typically flashed in USB DFU mode. This is a straight-forward process in Configurator. The standard flashing procedure should work successfully with the caveat of some platform specific matters as noted below.

  • If the board is placed in DFU mode manually (by hardware button), then check "No reboot sequence"
  • Baudrate is not relevant for DFU flashing.
  • For version upgrades, enable "Full chip erase"

Platform Specific: Linux

Linux requires udev rules to allow write access to USB devices for users.

Simple unconditional rule

The simplest rule is to allow DFU access unconditionally; this avoids having to set up specific groups which may be distro independent. If you have previously flashed OpenTX or EdgeTX you will already have such a rule as /etc/udev/rules.d/45-companion-taranis.rules and no further action is required. Otherwise, you can add (as root) a file for example /etc/udev/rules.d/45-stdfu-permissions.rules containing the single line:

SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"

More complex group example

As an alternative, you can make a distro specific rule restricting DFU a group; an example shell command to achieve this on Ubuntu is:

(echo '# DFU (Internal bootloader for STM32 MCUs)'
 echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="0664", GROUP="plugdev"') | sudo tee /etc/udev/rules.d/45-stdfu-permissions.rules > /dev/null

This assigns the device to the plugdev group(a standard group in Ubuntu). To check that your account is in the plugdev group type groups in the shell and ensure plugdev is listed. If not you can add yourself as shown (replacing <username> with your username):

sudo usermod -a -G plugdev <username>

Then log out and back again to acquire the new group.

On Arch and its derivatives the group would be uucp (in the rule and the usermod command:

sudo usermod -a -G uucp <username>

Platform Specific: Windows

The Configurator can have problems accessing USB devices on Windows. A driver should be automatically installed by Windows for the ST Device in DFU Mode but this doesn't always allow access. One solution is to replace the ST driver with a libusb driver. The easiest way to do that is to download Zadig. With the board connected and in bootloader mode (reset it by sending the character R via serial, or simply attempt to flash it with the correct serial port selected in Configurator):

  • Open Zadig
  • Choose Options > List All Devices
  • Select STM32 BOOTLOADER in the device list
  • Choose WinUSB (v6.x.x.x) in the right hand box

Zadig Driver Procedure

  • Click Replace Driver
  • Restart the Configurator (make sure it is completely closed, logout and login if unsure)
  • Now the DFU device should be seen by Configurator

Using dfu-util

dfu-util is a command line tool to flash ARM devices via DFU. It is available via the package manager on most Linux systems or from source forge.

Put the device into DFU mode by one of the following:

  • Use the hardware button on the board
  • Send a single 'R' character to the serial device, e.g. on POSIX OS using /dev/ttyACM0 at 115200 baudrate.
stty 115200 < /dev/ttyACM0
echo -ne 'R' > /dev/ttyACM0
  • Use the CLI command dfu

It is necessary to convert the .hex file into Intel binary. This can be done using the GCC objcopy command; e.g. for the notional inav_x.y.z_NNNNNN.hex.

objcopy -I ihex inav_x.y.z_NNNNNN.hex -O binary inav_x.y.z_NNNNNN.bin

You can now DFU flash the .bin file:

dfu-util -d 0483:df11 --alt 0 -s 0x08000000:force:leave -D inav_x.y.z_NNNNNN.bin

or with full erase

dfu-util -d 0483:df11 --alt 0 -s 0x08000000:mass-erase:force:leave -D inav_x.y.z_NNNNNN.bin

Caveats

Once the board is placed in DFU mode, the hardware boot loader polls for activity on the USB device and some MCU dependent UARTS (often UART1 and UART3). If you have a device on one of these UARTS that transmits unconditionally (GPS, RX for example), then that port may win the "active device" race, and DFU flashing will fail.

Ensure that such devices are either disconnected or not powered during flashing.

Older devices / broken USB ports

If you have a older (unsupported) FC that does not support DFU, or a modern board with a broken USB port, it is possible to flash the board via a UART (typically UART1) using the ST serial flashing protocol.

This is supported by (very) old Configurators, the open source stm32flash tool and some ST proprietary tools.

Examples:

  • Erase the device (assumed /dev/ttyUSB0)
stm32flash -o -b 57600 /dev/ttyUSB0
  • Flash a HEX file (notionally inav_x.y.z_NNNNNN.hex)
stm32flash -w inav_x.y.z_NNNNNN.hex -v -g 0x0 -b 57600 /dev/ttyUSB0

replace /dev/ttyUSB0 as appropriate for your OS. You will probably be more successful at 57600 baud than 115200. The speed is auto-detected by the FC.