-
Notifications
You must be signed in to change notification settings - Fork 1.4k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
i2c Bus of Mamba F405 Mk2 30mm FC Support #6509
Comments
Robert-Me2
changed the title
i2c Bus of Mamba F405 Mk2 30mm FC Support. This FC has SCL and SDA terminals but I am not able to activate the compass of BN-880 and/or Baro of bpe/bpm-280 (4 terminal, 5v version) to this flight controller using INAV. The target used was FURYF4OSD (recommended by Diatone; is there an alternative target?) using INAV v2.6. The wiring was checked many times, no shorts. I tried each device individually then both together, varied bus speeds from 100-800 in INAV config. My last test was to add one 4.7k pull up resistor to compass and baro without success. After all my efforts I questioned if i2c bus is actually supported on this board becuase the updated version of this FC (the Mk3 30mm F405, available 21-Jan-2021) states that it now has functional i2c Bus. Please comment if you have experience with this FC using INAV gps, compas and baro. What should I try next? Thank you all for your efforts!
i2c Bus of Mamba F405 Mk2 30mm FC Support. FlySky iBus receiver is on UART3, GPS on UART6. This FC has SCL and SDA terminals but I am not able to activate the compass of BN-880 and/or Baro of bpe/bpm-280 (4 terminal, 5v version) to this flight controller using INAV. The target used was FURYF4OSD (recommended by Diatone; is there an alternative target?) using INAV v2.6. The wiring was checked many times, no shorts. I tried each device individually then both together, varied bus speeds from 100-800 in INAV config. My last test was to add one 4.7k pull up resistor to compass and baro without success. After all my efforts I questioned if i2c bus is actually supported on this board becuase the updated version of this FC (the Mk3 30mm F405, available 21-Jan-2021) states that it now has functional i2c Bus. Please comment if you have experience with this FC using INAV gps, compas and baro. What should I try next? Thank you all for your efforts!
Jan 14, 2021
Robert-Me2
changed the title
i2c Bus of Mamba F405 Mk2 30mm FC Support. FlySky iBus receiver is on UART3, GPS on UART6. This FC has SCL and SDA terminals but I am not able to activate the compass of BN-880 and/or Baro of bpe/bpm-280 (4 terminal, 5v version) to this flight controller using INAV. The target used was FURYF4OSD (recommended by Diatone; is there an alternative target?) using INAV v2.6. The wiring was checked many times, no shorts. I tried each device individually then both together, varied bus speeds from 100-800 in INAV config. My last test was to add one 4.7k pull up resistor to compass and baro without success. After all my efforts I questioned if i2c bus is actually supported on this board becuase the updated version of this FC (the Mk3 30mm F405, available 21-Jan-2021) states that it now has functional i2c Bus. Please comment if you have experience with this FC using INAV gps, compas and baro. What should I try next? Thank you all for your efforts!
i2c Bus of Mamba F405 Mk2 30mm FC Support
Jan 14, 2021
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
PLEASE MAKE SURE YOU READ AND UNDERSTAND THE SOCIAL MEDIA SUPPORT CHANNELS. QUESTIONS ABOUT FLASHING, CONFIGURING, PILOTING MAY BE CLOSED WITHOUT FURTHER INTERACTION.
Please double-check that nobody reported the issue before by using search in this bug tracker.
PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT
Current Behavior
Steps to Reproduce
Expected behavior
Suggested solution(s)
Additional context
The text was updated successfully, but these errors were encountered: