NUCLEO-144_DBG_TRACE_ADAPTER

STM Nucleo-144 adapter, exposing standard Coresight 20 connector

This adapter can be used with STM NUCLEO-144 boards

Standalone mode

This example is based on NUCLEO-L4R5ZI

1. Place a jumper JP2 on NUCLEO-L4R5ZI - you might need to solder pins and then place a jumper
2. Remove all the jumpers from JP6 on NUCLEO-L4R5ZI
3. Plug on NUCLEO-144_DBG_TRACE_ADAPTER
4. connect CN5 on NUCLEO-L4R5Z and P3 on NUCLEO-144_DBG_TRACE_ADAPTER with wires
5. Plug 5V to P2 on NUCLEO-L4R5Z
6. Plug Coresight 20 to P1 on NUCLEO-L4R5Z
7. Turn ON SW1
8. Happy debugging and tracing