squash commits for 3.0.14 patch

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 0
-SUBLEVEL = 13
+SUBLEVEL = 14
 EXTRAVERSION =
 NAME = Sneaky Weasel
 

arch/arm/mach-at91/at91sam9260.c

@@ -237,9 +237,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 };
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -748,7 +748,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -563,23 +563,23 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 	int val;
 	u32 value;
 
-	if (!vpif_vsclkdis_reg || !cpld_client)
+	if (!vpif_vidclkctl_reg || !cpld_client)
 		return -ENXIO;
 
 	val = i2c_smbus_read_byte(cpld_client);
 	if (val < 0)
 		return val;
 
 	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(vpif_vsclkdis_reg);
+	value = __raw_readl(vpif_vidclkctl_reg);
 	if (mux_mode) {
 		val &= VPIF_INPUT_TWO_CHANNEL;
 		value |= VIDCH1CLK;
 	} else {
 		val |= VPIF_INPUT_ONE_CHANNEL;
 		value &= ~VIDCH1CLK;
 	}
-	__raw_writel(value, vpif_vsclkdis_reg);
+	__raw_writel(value, vpif_vidclkctl_reg);
 	spin_unlock_irqrestore(&vpif_reg_lock, flags);
 
 	err = i2c_smbus_write_byte(cpld_client, val);

arch/arm/mach-mxs/include/mach/mxs.h

@@ -30,6 +30,7 @@
  */
 #define cpu_is_mx23()		(					\
 		machine_is_mx23evk() ||					\
+		machine_is_stmp378x() ||				\
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\

arch/x86/kernel/hpet.c

@@ -1054,6 +1054,14 @@ int hpet_rtc_timer_init(void)
 }
 EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
 
+static void hpet_disable_rtc_channel(void)
+{
+	unsigned long cfg;
+	cfg = hpet_readl(HPET_T1_CFG);
+	cfg &= ~HPET_TN_ENABLE;
+	hpet_writel(cfg, HPET_T1_CFG);
+}
+
 /*
  * The functions below are called from rtc driver.
  * Return 0 if HPET is not being used.
@@ -1065,6 +1073,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
 		return 0;
 
 	hpet_rtc_flags &= ~bit_mask;
+	if (unlikely(!hpet_rtc_flags))
+		hpet_disable_rtc_channel();
+
 	return 1;
 }
 EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
@@ -1130,15 +1141,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
 
 static void hpet_rtc_timer_reinit(void)
 {
-	unsigned int cfg, delta;
+	unsigned int delta;
 	int lost_ints = -1;
 
-	if (unlikely(!hpet_rtc_flags)) {
-		cfg = hpet_readl(HPET_T1_CFG);
-		cfg &= ~HPET_TN_ENABLE;
-		hpet_writel(cfg, HPET_T1_CFG);
-		return;
-	}
+	if (unlikely(!hpet_rtc_flags))
+		hpet_disable_rtc_channel();
 
 	if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
 		delta = hpet_default_delta;

arch/x86/mm/gup.c

@@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
+		if (PageTail(page))
+			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;

arch/x86/xen/setup.c

@@ -192,9 +192,21 @@ static unsigned long __init xen_get_max_pages(void)
 	domid_t domid = DOMID_SELF;
 	int ret;
 
-	ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
-	if (ret > 0)
-		max_pages = ret;
+	/*
+	 * For the initial domain we use the maximum reservation as
+	 * the maximum page.
+	 *
+	 * For guest domains the current maximum reservation reflects
+	 * the current maximum rather than the static maximum. In this
+	 * case the e820 map provided to us will cover the static
+	 * maximum region.
+	 */
+	if (xen_initial_domain()) {
+		ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+		if (ret > 0)
+			max_pages = ret;
+	}
+
 	return min(max_pages, MAX_DOMAIN_PAGES);
 }
 

drivers/firmware/iscsi_ibft.c

@@ -738,16 +738,54 @@ static void __exit ibft_exit(void)
 	ibft_cleanup();
 }
 
+#ifdef CONFIG_ACPI
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	{ ACPI_SIG_IBFT },
+	{ "iBFT" },
+};
+
+static void __init acpi_find_ibft_region(void)
+{
+	int i;
+	struct acpi_table_header *table = NULL;
+
+	if (acpi_disabled)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+		acpi_get_table(ibft_signs[i].sign, 0, &table);
+		ibft_addr = (struct acpi_table_ibft *)table;
+	}
+}
+#else
+static void __init acpi_find_ibft_region(void)
+{
+}
+#endif
+
 /*
  * ibft_init() - creates sysfs tree entries for the iBFT data.
  */
 static int __init ibft_init(void)
 {
 	int rc = 0;
 
+	/*
+	   As on UEFI systems the setup_arch()/find_ibft_region()
+	   is called before ACPI tables are parsed and it only does
+	   legacy finding.
+	*/
+	if (!ibft_addr)
+		acpi_find_ibft_region();
+
 	if (ibft_addr) {
-		printk(KERN_INFO "iBFT detected at 0x%llx.\n",
-		       (u64)isa_virt_to_bus(ibft_addr));
+		pr_info("iBFT detected.\n");
 
 		rc = ibft_check_device();
 		if (rc)

drivers/firmware/iscsi_ibft_find.c

@@ -45,13 +45,6 @@ EXPORT_SYMBOL_GPL(ibft_addr);
 static const struct {
 	char *sign;
 } ibft_signs[] = {
-#ifdef CONFIG_ACPI
-	/*
-	 * One spec says "IBFT", the other says "iBFT". We have to check
-	 * for both.
-	 */
-	{ ACPI_SIG_IBFT },
-#endif
 	{ "iBFT" },
 	{ "BIFT" },	/* Broadcom iSCSI Offload */
 };
@@ -62,14 +55,6 @@ static const struct {
 #define VGA_MEM 0xA0000 /* VGA buffer */
 #define VGA_SIZE 0x20000 /* 128kB */
 
-#ifdef CONFIG_ACPI
-static int __init acpi_find_ibft(struct acpi_table_header *header)
-{
-	ibft_addr = (struct acpi_table_ibft *)header;
-	return 0;
-}
-#endif /* CONFIG_ACPI */
-
 static int __init find_ibft_in_mem(void)
 {
 	unsigned long pos;
@@ -94,6 +79,7 @@ static int __init find_ibft_in_mem(void)
 				 * the table cannot be valid. */
 				if (pos + len <= (IBFT_END-1)) {
 					ibft_addr = (struct acpi_table_ibft *)virt;
+					pr_info("iBFT found at 0x%lx.\n", pos);
 					goto done;
 				}
 			}
@@ -108,20 +94,12 @@ static int __init find_ibft_in_mem(void)
  */
 unsigned long __init find_ibft_region(unsigned long *sizep)
 {
-#ifdef CONFIG_ACPI
-	int i;
-#endif
 	ibft_addr = NULL;
 
-#ifdef CONFIG_ACPI
-	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
-		acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
-#endif /* CONFIG_ACPI */
-
 	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
 	 * only use ACPI for this */
 
-	if (!ibft_addr && !efi_enabled)
+	if (!efi_enabled)
 		find_ibft_in_mem();
 
 	if (ibft_addr) {

drivers/hwmon/coretemp.c

@@ -747,6 +747,8 @@ static void __cpuinit put_core_offline(unsigned int cpu)
 		return;
 
 	pdata = platform_get_drvdata(pdev);
+	if (!pdata)
+		return;
 
 	indx = TO_ATTR_NO(cpu);
 

drivers/hwmon/jz4740-hwmon.c

@@ -59,7 +59,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
 {
 	struct jz4740_hwmon *hwmon = dev_get_drvdata(dev);
 	struct completion *completion = &hwmon->read_completion;
-	unsigned long t;
+	long t;
 	unsigned long val;
 	int ret;
 

drivers/md/raid5.c

@@ -3078,7 +3078,7 @@ static void handle_stripe5(struct stripe_head *sh)
 			/* Not in-sync */;
 		else if (test_bit(In_sync, &rdev->flags))
 			set_bit(R5_Insync, &dev->flags);
-		else {
+		else if (!test_bit(Faulty, &rdev->flags)) {
 			/* could be in-sync depending on recovery/reshape status */
 			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
 				set_bit(R5_Insync, &dev->flags);

drivers/mmc/host/mxcmmc.c

@@ -731,6 +731,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				"failed to config DMA channel. Falling back to PIO\n");
 			dma_release_channel(host->dma);
 			host->do_dma = 0;
+			host->dma = NULL;
 		}
 	}
 

drivers/net/wireless/iwlwifi/iwl-agn-rxon.c

@@ -411,6 +411,24 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	return 0;
 }
 
+void iwlagn_config_ht40(struct ieee80211_conf *conf,
+	struct iwl_rxon_context *ctx)
+{
+	if (conf_is_ht40_minus(conf)) {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+		ctx->ht.is_40mhz = true;
+	} else if (conf_is_ht40_plus(conf)) {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+		ctx->ht.is_40mhz = true;
+	} else {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_NONE;
+		ctx->ht.is_40mhz = false;
+	}
+}
+
 int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct iwl_priv *priv = hw->priv;
@@ -470,19 +488,11 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
 				ctx->ht.enabled = conf_is_ht(conf);
 
 			if (ctx->ht.enabled) {
-				if (conf_is_ht40_minus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-					ctx->ht.is_40mhz = true;
-				} else if (conf_is_ht40_plus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-					ctx->ht.is_40mhz = true;
-				} else {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_NONE;
-					ctx->ht.is_40mhz = false;
-				}
+				/* if HT40 is used, it should not change
+				 * after associated except channel switch */
+				if (iwl_is_associated_ctx(ctx) &&
+				     !ctx->ht.is_40mhz)
+					iwlagn_config_ht40(conf, ctx);
 			} else
 				ctx->ht.is_40mhz = false;
 

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -2872,21 +2872,9 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
 
 			/* Configure HT40 channels */
 			ctx->ht.enabled = conf_is_ht(conf);
-			if (ctx->ht.enabled) {
-				if (conf_is_ht40_minus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-					ctx->ht.is_40mhz = true;
-				} else if (conf_is_ht40_plus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-					ctx->ht.is_40mhz = true;
-				} else {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_NONE;
-					ctx->ht.is_40mhz = false;
-				}
-			} else
+			if (ctx->ht.enabled)
+				iwlagn_config_ht40(conf, ctx);
+			else
 				ctx->ht.is_40mhz = false;
 
 			if ((le16_to_cpu(ctx->staging.channel) != ch))

drivers/net/wireless/iwlwifi/iwl-agn.h

@@ -152,6 +152,8 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
 			     struct ieee80211_bss_conf *bss_conf,
 			     u32 changes);
+void iwlagn_config_ht40(struct ieee80211_conf *conf,
+			struct iwl_rxon_context *ctx);
 
 /* uCode */
 void iwlagn_rx_calib_result(struct iwl_priv *priv,