Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

no device present #9

Closed
peseta3 opened this issue Dec 14, 2017 · 35 comments
Closed

no device present #9

peseta3 opened this issue Dec 14, 2017 · 35 comments

Comments

@peseta3
Copy link

peseta3 commented Dec 14, 2017

Hallo together,
I am a Newbee, I have the follow problem.
I make all I have to do with the getting started page

http://rawgit.com/emsec/ChameleonMini/master/Doc/Doxygen/html/Page_GettingStarted.html

And I get with win10 the Massage

dfu-programmer: no device present.
There was an error with executing this command. Maybe your ChameleonMini is not in bootloader

mode?

what can I do with this?
@iceman1001
Copy link
Owner

As it recommends, try to get your device in bootloader mode...

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

I did it

@iceman1001
Copy link
Owner

You might be better off asking on the offical chameleon mini repo. This repo is to work the firmware than offering support.

Good luck!

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017 •
edited

hmm
where can i find it?

is it emsec?

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

can you give me the
offical chameleon mini repo

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017

It's the one where you already opened the issue emsec/ChameleonMini#158
:)

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

ok
but they says that I hav to go to you.
because they have an other device

what can I now make?

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

they says I have to go to Iceman

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017 •
edited

Yeah, I saw they told you to come here, but this is not yet a stable project. We're not working on fixing bugs at the moment, we're still trying to understand and fix the codebase.
You have to understand if you own hardware rev G or hardware rev E. Where did you buy it?

Also, at this moment I am not working on this due to real life issues.

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017 •
edited

I bought it from Lab401.com it is the RevE

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

ok real life has priority

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017 •
edited

I bought it from Lab401.com it is the RevE

So you better ask them.
Are you using linux?

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

I ask them but I didn`t get answere

I have both

Win10 and ubuntu 16

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017 •
edited

Try to run a dmesg -w in linux without the chameleon attached to the PC, then connect the device and post the output

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

-w it doesn`t work

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

sorry ubuntu 12.04

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017

Oh, ok. Then run dmesg without the chameleon and another dmesg 10 seconds after you connect the device

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

combining
[ 0.655975] mtrr: type mismatch for b0000000,4000 old: write-back new: write-combining
[ 0.655976] mtrr: type mismatch for b0000000,2000 old: write-back new: write-combining
[ 0.655978] mtrr: type mismatch for b0000000,1000 old: write-back new: write-combining
[ 0.656420] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
[ 0.659113] Console: switching to colour frame buffer device 170x48
[ 0.661653] fb0: VESA VGA frame buffer device
[ 0.661670] intel_idle: does not run on family 6 model 61
[ 0.661675] ipmi message handler version 39.2
[ 0.662087] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.662736] ACPI: AC Adapter [ADP0] (off-line)
[ 0.662817] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.663137] ACPI: Lid Switch [LID0]
[ 0.663175] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.663179] ACPI: Power Button [PWRB]
[ 0.663207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.663209] ACPI: Power Button [PWRF]
[ 0.664084] Monitor-Mwait will be used to enter C-1 state
[ 0.664095] Monitor-Mwait will be used to enter C-2 state
[ 0.664105] Monitor-Mwait will be used to enter C-3 state
[ 0.664120] ACPI: acpi_idle registered with cpuidle
[ 0.665040] GHES: HEST is not enabled!
[ 0.665122] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.668863] Linux agpgart interface v0.103
[ 0.670266] brd: module loaded
[ 0.670886] loop: module loaded
[ 0.671220] libphy: Fixed MDIO Bus: probed
[ 0.671311] tun: Universal TUN/TAP device driver, 1.6
[ 0.671312] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 0.671360] PPP generic driver version 2.4.2
[ 0.671398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.671402] ehci-pci: EHCI PCI platform driver
[ 0.671529] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.671534] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.671546] ehci-pci 0000:00:1d.0: debug port 2
[ 0.675452] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.675477] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[ 0.686542] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.686589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.686591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686593] usb usb1: Product: EHCI Host Controller
[ 0.686594] usb usb1: Manufacturer: Linux 3.13.0-117-generic ehci_hcd
[ 0.686596] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.686759] hub 1-0:1.0: USB hub found
[ 0.686768] hub 1-0:1.0: 2 ports detected
[ 0.686873] ehci-platform: EHCI generic platform driver
[ 0.686880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.686882] ohci-pci: OHCI PCI platform driver
[ 0.686889] ohci-platform: OHCI generic platform driver
[ 0.686895] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.686990] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.686992] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 7
[ 0.687019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.687024] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.688091] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.688112] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
[ 0.688165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.688167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688168] usb usb2: Product: xHCI Host Controller
[ 0.688170] usb usb2: Manufacturer: Linux 3.13.0-117-generic xhci_hcd
[ 0.688172] usb usb2: SerialNumber: 0000:00:14.0
[ 0.688350] hub 2-0:1.0: USB hub found
[ 0.688364] hub 2-0:1.0: 11 ports detected
[ 0.692162] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.692168] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.692200] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.692202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692204] usb usb3: Product: xHCI Host Controller
[ 0.692205] usb usb3: Manufacturer: Linux 3.13.0-117-generic xhci_hcd
[ 0.692207] usb usb3: SerialNumber: 0000:00:14.0
[ 0.692312] hub 3-0:1.0: USB hub found
[ 0.692320] hub 3-0:1.0: 4 ports detected
[ 0.702693] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.725967] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.725973] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.726090] mousedev: PS/2 mouse device common for all mice
[ 0.726692] rtc_cmos 00:04: RTC can wake from S4
[ 0.726815] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.726842] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.726903] device-mapper: uevent: version 1.0.3
[ 0.726963] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.726972] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.727062] TCP: cubic registered
[ 0.727138] NET: Registered protocol family 10
[ 0.727277] NET: Registered protocol family 17
[ 0.727295] Key type dns_resolver registered
[ 0.727529] Loading compiled-in X.509 certificates
[ 0.728447] Loaded X.509 cert 'Magrathea: Glacier signing key: 2de26ea51fed18cc30ca5cdda9cdd90a22adde2a'
[ 0.728458] registered taskstats version 1
[ 0.730396] Key type trusted registered
[ 0.733575] Key type encrypted registered
[ 0.733580] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.733582] IMA: No TPM chip found, activating TPM-bypass!
[ 0.733967] regulator-dummy: disabling
[ 0.734010] Magic number: 13:84:180
[ 0.734100] rtc_cmos 00:04: setting system clock to 2017-12-14 13:09:57 UTC (1513256997)
[ 0.734821] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.734823] EDD information not available.
[ 0.734865] PM: Hibernation image not present or could not be loaded.
[ 0.736352] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.767364] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.767371] ACPI: Battery Slot [BAT0] (battery present)
[ 0.768478] Freeing unused kernel memory: 1360K (ffffffff81d1f000 - ffffffff81e73000)
[ 0.768480] Write protecting the kernel read-only data: 12288k
[ 0.768713] Freeing unused kernel memory: 504K (ffff880001782000 - ffff880001800000)
[ 0.770139] Freeing unused kernel memory: 580K (ffff880001b6f000 - ffff880001c00000)
[ 0.784883] udevd[124]: starting version 175
[ 0.818281] ahci 0000:00:1f.2: version 3.0
[ 0.818611] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
[ 0.826683] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.826699] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.834511] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.834517] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.835275] r8169 0000:02:00.0: irq 63 for MSI/MSI-X
[ 0.835471] scsi0 : ahci
[ 0.835606] r8169 0000:02:00.0 eth0: RTL8106e at 0xffffc90000666000, 50:7b:9d:8f:1f:74, XID 10900800 IRQ 63
[ 0.835693] scsi1 : ahci
[ 0.835754] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 62
[ 0.835758] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 62
[ 0.998468] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.130772] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.130777] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.131158] hub 1-1:1.0: USB hub found
[ 1.131232] hub 1-1:1.0: 8 ports detected
[ 1.154421] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.154440] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.157043] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
[ 1.159198] ata2.00: configured for UDMA/33
[ 1.160578] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/100
[ 1.160582] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.166778] ata1.00: configured for UDMA/100
[ 1.167011] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
[ 1.167194] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.167199] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.167210] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.167274] sd 0:0:0:0: [sda] Write Protect is off
[ 1.167278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.167307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.169048] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
[ 1.170777] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.170780] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.170883] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.170934] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.215784] sda: sda1 sda2 < sda5 >
[ 1.216317] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.298330] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 1.314715] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[ 1.314719] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.314721] usb 2-4: Product: USB2.0-CRW
[ 1.314723] usb 2-4: Manufacturer: Generic
[ 1.314724] usb 2-4: SerialNumber: 20100201396000000
[ 1.426321] usb 2-6: new high-speed USB device number 3 using xhci_hcd
[ 1.491997] usb 2-6: New USB device found, idVendor=05e3, idProduct=0510
[ 1.492001] usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=4
[ 1.492003] usb 2-6: Product: Lenovo EasyCamera
[ 1.492005] usb 2-6: SerialNumber: \x07K12HBS44F
[ 1.511618] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.618241] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[ 1.770190] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 1.786616] usb 2-7: No LPM exit latency info found. Power management will be impacted.
[ 1.787814] usb 2-7: New USB device found, idVendor=0bda, idProduct=b728
[ 1.787818] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.787820] usb 2-7: Product: Bluetooth Radio
[ 1.787822] usb 2-7: Manufacturer: Realtek
[ 1.787823] usb 2-7: SerialNumber: 00e04c000001
[ 2.198136] random: init urandom read with 106 bits of entropy available
[ 2.533971] random: nonblocking pool is initialized
[ 2.617945] Switched to clocksource tsc
[ 3.094985] init: ureadahead main process (372) terminated with status 5
[ 4.077569] Adding 4111356k swap on /dev/sda5. Priority:-1 extents:1 across:4111356k FS
[ 5.632257] udevd[449]: starting version 175
[ 7.264545] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.916372] lp: driver loaded but no devices found
[ 9.388254] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.434199] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input5
[ 9.553148] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 9.553157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.553161] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 9.553165] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 9.553167] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.553169] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 9.553171] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 9.553173] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.553175] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.731705] Bluetooth: Core ver 2.17
[ 9.731728] NET: Registered protocol family 31
[ 9.731730] Bluetooth: HCI device and connection manager initialized
[ 9.731741] Bluetooth: HCI socket layer initialized
[ 9.731747] Bluetooth: L2CAP socket layer initialized
[ 9.731755] Bluetooth: SCO socket layer initialized
[ 9.807867] [drm] Initialized drm 1.1.0 20060810
[ 9.858991] cfg80211: Calling CRDA to update world regulatory domain
[ 9.918740] [drm] Memory usable by graphics device = 4096M
[ 9.918745] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 9.918747] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 9.918774] Console: switching to colour dummy device 80x25
[ 10.011219] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[ 10.011231] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.011232] [drm] Driver supports precise vblank timestamp query.
[ 10.679468] psmouse serio1: synaptics: queried max coordinates: x [..5716], y [..4880]
[ 10.723801] psmouse serio1: synaptics: queried min coordinates: x [1252..], y [1020..]
[ 10.814966] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2a800, board id: 3187, fw id: 1955965
[ 10.872128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 11.530037] type=1400 audit(1513257008.295:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=880 comm="apparmor_parser"
[ 11.530046] type=1400 audit(1513257008.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=880 comm="apparmor_parser"
[ 11.530052] type=1400 audit(1513257008.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=880 comm="apparmor_parser"
[ 11.530062] type=1400 audit(1513257008.295:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=930 comm="apparmor_parser"
[ 11.530070] type=1400 audit(1513257008.295:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser"
[ 11.530076] type=1400 audit(1513257008.295:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser"
[ 11.530804] type=1400 audit(1513257008.299:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=880 comm="apparmor_parser"
[ 11.530811] type=1400 audit(1513257008.299:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=880 comm="apparmor_parser"
[ 11.530819] type=1400 audit(1513257008.299:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser"
[ 11.530825] type=1400 audit(1513257008.299:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser"
[ 11.749854] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 11.951842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.952438] usbcore: registered new interface driver btusb
[ 12.003506] fbcon: inteldrmfb (fb0) is primary device
[ 12.283067] ppdev: user-space parallel port driver
[ 12.402201] cfg80211: World regulatory domain updated:
[ 12.402202] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.402204] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.402205] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.402206] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.402207] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.402209] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.066137] Console: switching to colour frame buffer device 170x48
[ 13.068663] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.068665] i915 0000:00:02.0: registered panic notifier
[ 13.071512] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.071877] acpi device:17: registered as cooling_device4
[ 13.072154] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.072271] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.072545] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
[ 13.078139] hda-intel 0000:00:03.0: Using LPIB position fix
[ 13.078188] HDA driver get symbol successfully from i915 module
[ 13.078486] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
[ 13.086111] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
[ 13.257610] hda_codec: CX20751/2: BIOS auto-probing.
[ 13.257823] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 13.257826] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.257828] hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 13.257830] mono: mono_out=0x0
[ 13.257831] inputs:
[ 13.257833] Internal Mic=0x1a
[ 13.257835] Mic=0x19
[ 13.258508] hda_codec: Enable sync_write for stable communication
[ 13.261100] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 13.261261] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 13.263046] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 13.263151] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 13.263228] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 13.312304] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.314005] scsi2 : SCSI emulation for RTS5139 USB card reader
[ 13.314158] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 13.314176] usbcore: registered new interface driver rts5139
[ 13.314669] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 13.416178] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 13.518542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.518546] Bluetooth: BNEP filters: protocol multicast
[ 13.518555] Bluetooth: BNEP socket layer initialized
[ 13.681344] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.681586] rtlwifi: wireless switch is on
[ 13.777851] Bluetooth: RFCOMM TTY layer initialized
[ 13.777865] Bluetooth: RFCOMM socket layer initialized
[ 13.777872] Bluetooth: RFCOMM ver 1.11
[ 14.099277] init: failsafe main process (983) killed by TERM signal
[ 14.210267] Linux video capture interface: v2.00
[ 15.244509] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (05e3:0510)
[ 15.299254] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input13
[ 15.299348] usbcore: registered new interface driver uvcvideo
[ 15.299351] USB Video Class driver (1.1.1)
[ 20.272479] r8169 0000:02:00.0: Direct firmware load failed with error -2
[ 20.272484] r8169 0000:02:00.0: Falling back to user helper
[ 20.322520] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8106e-2.fw (-2)
[ 20.329519] r8169 0000:02:00.0 eth0: link down
[ 20.329568] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.605105] audit_printk_skb: 15 callbacks suppressed
[ 20.605109] type=1400 audit(1513257017.375:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1244 comm="apparmor_parser"
[ 20.605115] type=1400 audit(1513257017.375:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1244 comm="apparmor_parser"
[ 20.605119] type=1400 audit(1513257017.375:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1244 comm="apparmor_parser"
[ 20.605566] type=1400 audit(1513257017.375:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1244 comm="apparmor_parser"
[ 20.605570] type=1400 audit(1513257017.375:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1244 comm="apparmor_parser"
[ 20.605801] type=1400 audit(1513257017.375:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1244 comm="apparmor_parser"
[ 20.608769] type=1400 audit(1513257017.379:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1248 comm="apparmor_parser"
[ 20.608777] type=1400 audit(1513257017.379:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1248 comm="apparmor_parser"
[ 20.609284] type=1400 audit(1513257017.379:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1248 comm="apparmor_parser"
[ 20.696813] type=1400 audit(1513257017.467:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1243 comm="apparmor_parser"
[ 23.962521] init: anacron main process (1314) killed by TERM signal
[ 37.697303] usb 2-6: reset high-speed USB device number 3 using xhci_hcd
[ 37.754488] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036157800
[ 143.611025] usb 2-2: new full-speed USB device number 5 using xhci_hcd
[ 143.629818] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 143.629828] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 143.629833] usb 2-2: Product: LUFA CDC Demo
[ 143.629837] usb 2-2: Manufacturer: Dean Camera
[ 143.629841] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 143.630131] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 143.709265] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 143.709605] usbcore: registered new interface driver cdc_acm
[ 143.709610] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 151.554762] usb 2-2: USB disconnect, device number 5
[ 162.924045] usb 2-2: new full-speed USB device number 6 using xhci_hcd
[ 162.942827] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 162.942837] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 162.942842] usb 2-2: Product: LUFA CDC Demo
[ 162.942846] usb 2-2: Manufacturer: Dean Camera
[ 162.942850] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 162.943141] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 162.943646] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 182.332904] usb 2-2: USB disconnect, device number 6
[ 198.147312] usb 2-2: new full-speed USB device number 7 using xhci_hcd
[ 198.166099] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 198.166109] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 198.166114] usb 2-2: Product: LUFA CDC Demo
[ 198.166118] usb 2-2: Manufacturer: Dean Camera
[ 198.166122] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 198.166394] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 198.166867] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 245.172375] usb 2-2: USB disconnect, device number 7
[ 254.374990] usb 2-2: new full-speed USB device number 8 using xhci_hcd
[ 254.393438] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 254.393442] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 254.393445] usb 2-2: Product: LUFA CDC Demo
[ 254.393447] usb 2-2: Manufacturer: Dean Camera
[ 254.393448] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 254.393588] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 254.393940] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 304.219327] usb 2-2: USB disconnect, device number 8
[ 308.943264] usb 2-2: new full-speed USB device number 9 using xhci_hcd
[ 308.962055] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 308.962065] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 308.962070] usb 2-2: Product: LUFA CDC Demo
[ 308.962075] usb 2-2: Manufacturer: Dean Camera
[ 308.962079] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 308.962346] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 308.962819] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 310.789905] usb 2-2: USB disconnect, device number 9
[ 379.709699] usb 2-2: new full-speed USB device number 10 using xhci_hcd
[ 379.728387] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 379.728395] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 379.728399] usb 2-2: Product: LUFA CDC Demo
[ 379.728402] usb 2-2: Manufacturer: Dean Camera
[ 379.728406] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 379.728624] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 379.729053] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 559.484586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 561.925182] wlan0: authenticate with 62:28:6d:45:3b:d6
[ 561.944316] wlan0: send auth to 62:28:6d:45:3b:d6 (try 1/3)
[ 561.946171] wlan0: 62:28:6d:45:3b:d6 denied authentication (status 37)
[ 713.629760] wlan0: authenticate with e0:28:6d:45:3b:d6
[ 713.649456] wlan0: send auth to e0:28:6d:45:3b:d6 (try 1/3)
[ 713.651541] wlan0: authenticated
[ 713.652912] wlan0: associate with e0:28:6d:45:3b:d6 (try 1/3)
[ 713.756939] wlan0: associate with e0:28:6d:45:3b:d6 (try 2/3)
[ 713.860790] wlan0: associate with e0:28:6d:45:3b:d6 (try 3/3)
[ 713.964754] wlan0: association with e0:28:6d:45:3b:d6 timed out
[ 720.771224] wlan0: authenticate with e0:28:6d:45:3b:d6
[ 720.790996] wlan0: send auth to e0:28:6d:45:3b:d6 (try 1/3)
[ 720.793294] wlan0: authenticated
[ 720.794306] wlan0: associate with e0:28:6d:45:3b:d6 (try 1/3)
[ 720.799015] wlan0: RX AssocResp from e0:28:6d:45:3b:d6 (capab=0x431 status=0 aid=1)
[ 720.799222] wlan0: associated
[ 720.799264] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 720.799375] cfg80211: Calling CRDA for country: DE
[ 720.805239] cfg80211: Regulatory domain changed to country: DE
[ 720.805250] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 720.805258] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 720.805264] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 720.805269] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 720.805275] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 948.401265] usb 2-2: USB disconnect, device number 10
[ 965.662025] usb 2-2: new full-speed USB device number 11 using xhci_hcd
[ 965.680476] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 965.680480] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 965.680482] usb 2-2: Product: LUFA CDC Demo
[ 965.680484] usb 2-2: Manufacturer: Dean Camera
[ 965.680486] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 965.680641] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 965.680992] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 1024.175513] usb 2-2: USB disconnect, device number 11

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

[ 0.661653] fb0: VESA VGA frame buffer device
[ 0.661670] intel_idle: does not run on family 6 model 61
[ 0.661675] ipmi message handler version 39.2
[ 0.662087] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.662736] ACPI: AC Adapter [ADP0] (off-line)
[ 0.662817] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.663137] ACPI: Lid Switch [LID0]
[ 0.663175] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.663179] ACPI: Power Button [PWRB]
[ 0.663207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.663209] ACPI: Power Button [PWRF]
[ 0.664084] Monitor-Mwait will be used to enter C-1 state
[ 0.664095] Monitor-Mwait will be used to enter C-2 state
[ 0.664105] Monitor-Mwait will be used to enter C-3 state
[ 0.664120] ACPI: acpi_idle registered with cpuidle
[ 0.665040] GHES: HEST is not enabled!
[ 0.665122] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.668863] Linux agpgart interface v0.103
[ 0.670266] brd: module loaded
[ 0.670886] loop: module loaded
[ 0.671220] libphy: Fixed MDIO Bus: probed
[ 0.671311] tun: Universal TUN/TAP device driver, 1.6
[ 0.671312] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 0.671360] PPP generic driver version 2.4.2
[ 0.671398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.671402] ehci-pci: EHCI PCI platform driver
[ 0.671529] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.671534] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.671546] ehci-pci 0000:00:1d.0: debug port 2
[ 0.675452] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.675477] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[ 0.686542] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.686589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.686591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686593] usb usb1: Product: EHCI Host Controller
[ 0.686594] usb usb1: Manufacturer: Linux 3.13.0-117-generic ehci_hcd
[ 0.686596] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.686759] hub 1-0:1.0: USB hub found
[ 0.686768] hub 1-0:1.0: 2 ports detected
[ 0.686873] ehci-platform: EHCI generic platform driver
[ 0.686880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.686882] ohci-pci: OHCI PCI platform driver
[ 0.686889] ohci-platform: OHCI generic platform driver
[ 0.686895] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.686990] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.686992] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 7
[ 0.687019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.687024] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.688091] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.688112] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
[ 0.688165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.688167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688168] usb usb2: Product: xHCI Host Controller
[ 0.688170] usb usb2: Manufacturer: Linux 3.13.0-117-generic xhci_hcd
[ 0.688172] usb usb2: SerialNumber: 0000:00:14.0
[ 0.688350] hub 2-0:1.0: USB hub found
[ 0.688364] hub 2-0:1.0: 11 ports detected
[ 0.692162] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.692168] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.692200] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.692202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692204] usb usb3: Product: xHCI Host Controller
[ 0.692205] usb usb3: Manufacturer: Linux 3.13.0-117-generic xhci_hcd
[ 0.692207] usb usb3: SerialNumber: 0000:00:14.0
[ 0.692312] hub 3-0:1.0: USB hub found
[ 0.692320] hub 3-0:1.0: 4 ports detected
[ 0.702693] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.725967] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.725973] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.726090] mousedev: PS/2 mouse device common for all mice
[ 0.726692] rtc_cmos 00:04: RTC can wake from S4
[ 0.726815] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.726842] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.726903] device-mapper: uevent: version 1.0.3
[ 0.726963] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.726972] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.727062] TCP: cubic registered
[ 0.727138] NET: Registered protocol family 10
[ 0.727277] NET: Registered protocol family 17
[ 0.727295] Key type dns_resolver registered
[ 0.727529] Loading compiled-in X.509 certificates
[ 0.728447] Loaded X.509 cert 'Magrathea: Glacier signing key: 2de26ea51fed18cc30ca5cdda9cdd90a22adde2a'
[ 0.728458] registered taskstats version 1
[ 0.730396] Key type trusted registered
[ 0.733575] Key type encrypted registered
[ 0.733580] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.733582] IMA: No TPM chip found, activating TPM-bypass!
[ 0.733967] regulator-dummy: disabling
[ 0.734010] Magic number: 13:84:180
[ 0.734100] rtc_cmos 00:04: setting system clock to 2017-12-14 13:09:57 UTC (1513256997)
[ 0.734821] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.734823] EDD information not available.
[ 0.734865] PM: Hibernation image not present or could not be loaded.
[ 0.736352] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.767364] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.767371] ACPI: Battery Slot [BAT0] (battery present)
[ 0.768478] Freeing unused kernel memory: 1360K (ffffffff81d1f000 - ffffffff81e73000)
[ 0.768480] Write protecting the kernel read-only data: 12288k
[ 0.768713] Freeing unused kernel memory: 504K (ffff880001782000 - ffff880001800000)
[ 0.770139] Freeing unused kernel memory: 580K (ffff880001b6f000 - ffff880001c00000)
[ 0.784883] udevd[124]: starting version 175
[ 0.818281] ahci 0000:00:1f.2: version 3.0
[ 0.818611] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
[ 0.826683] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.826699] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.834511] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.834517] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.835275] r8169 0000:02:00.0: irq 63 for MSI/MSI-X
[ 0.835471] scsi0 : ahci
[ 0.835606] r8169 0000:02:00.0 eth0: RTL8106e at 0xffffc90000666000, 50:7b:9d:8f:1f:74, XID 10900800 IRQ 63
[ 0.835693] scsi1 : ahci
[ 0.835754] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 62
[ 0.835758] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 62
[ 0.998468] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.130772] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.130777] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.131158] hub 1-1:1.0: USB hub found
[ 1.131232] hub 1-1:1.0: 8 ports detected
[ 1.154421] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.154440] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.157043] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
[ 1.159198] ata2.00: configured for UDMA/33
[ 1.160578] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/100
[ 1.160582] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.166778] ata1.00: configured for UDMA/100
[ 1.167011] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
[ 1.167194] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.167199] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.167210] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.167274] sd 0:0:0:0: [sda] Write Protect is off
[ 1.167278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.167307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.169048] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
[ 1.170777] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.170780] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.170883] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.170934] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.215784] sda: sda1 sda2 < sda5 >
[ 1.216317] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.298330] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 1.314715] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[ 1.314719] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.314721] usb 2-4: Product: USB2.0-CRW
[ 1.314723] usb 2-4: Manufacturer: Generic
[ 1.314724] usb 2-4: SerialNumber: 20100201396000000
[ 1.426321] usb 2-6: new high-speed USB device number 3 using xhci_hcd
[ 1.491997] usb 2-6: New USB device found, idVendor=05e3, idProduct=0510
[ 1.492001] usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=4
[ 1.492003] usb 2-6: Product: Lenovo EasyCamera
[ 1.492005] usb 2-6: SerialNumber: \x07K12HBS44F
[ 1.511618] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.618241] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[ 1.770190] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 1.786616] usb 2-7: No LPM exit latency info found. Power management will be impacted.
[ 1.787814] usb 2-7: New USB device found, idVendor=0bda, idProduct=b728
[ 1.787818] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.787820] usb 2-7: Product: Bluetooth Radio
[ 1.787822] usb 2-7: Manufacturer: Realtek
[ 1.787823] usb 2-7: SerialNumber: 00e04c000001
[ 2.198136] random: init urandom read with 106 bits of entropy available
[ 2.533971] random: nonblocking pool is initialized
[ 2.617945] Switched to clocksource tsc
[ 3.094985] init: ureadahead main process (372) terminated with status 5
[ 4.077569] Adding 4111356k swap on /dev/sda5. Priority:-1 extents:1 across:4111356k FS
[ 5.632257] udevd[449]: starting version 175
[ 7.264545] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.916372] lp: driver loaded but no devices found
[ 9.388254] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.434199] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input5
[ 9.553148] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 9.553157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.553161] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 9.553165] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 9.553167] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.553169] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 9.553171] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 9.553173] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.553175] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.731705] Bluetooth: Core ver 2.17
[ 9.731728] NET: Registered protocol family 31
[ 9.731730] Bluetooth: HCI device and connection manager initialized
[ 9.731741] Bluetooth: HCI socket layer initialized
[ 9.731747] Bluetooth: L2CAP socket layer initialized
[ 9.731755] Bluetooth: SCO socket layer initialized
[ 9.807867] [drm] Initialized drm 1.1.0 20060810
[ 9.858991] cfg80211: Calling CRDA to update world regulatory domain
[ 9.918740] [drm] Memory usable by graphics device = 4096M
[ 9.918745] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 9.918747] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 9.918774] Console: switching to colour dummy device 80x25
[ 10.011219] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[ 10.011231] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.011232] [drm] Driver supports precise vblank timestamp query.
[ 10.679468] psmouse serio1: synaptics: queried max coordinates: x [..5716], y [..4880]
[ 10.723801] psmouse serio1: synaptics: queried min coordinates: x [1252..], y [1020..]
[ 10.814966] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2a800, board id: 3187, fw id: 1955965
[ 10.872128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 11.530037] type=1400 audit(1513257008.295:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=880 comm="apparmor_parser"
[ 11.530046] type=1400 audit(1513257008.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=880 comm="apparmor_parser"
[ 11.530052] type=1400 audit(1513257008.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=880 comm="apparmor_parser"
[ 11.530062] type=1400 audit(1513257008.295:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=930 comm="apparmor_parser"
[ 11.530070] type=1400 audit(1513257008.295:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser"
[ 11.530076] type=1400 audit(1513257008.295:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser"
[ 11.530804] type=1400 audit(1513257008.299:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=880 comm="apparmor_parser"
[ 11.530811] type=1400 audit(1513257008.299:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=880 comm="apparmor_parser"
[ 11.530819] type=1400 audit(1513257008.299:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser"
[ 11.530825] type=1400 audit(1513257008.299:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser"
[ 11.749854] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 11.951842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.952438] usbcore: registered new interface driver btusb
[ 12.003506] fbcon: inteldrmfb (fb0) is primary device
[ 12.283067] ppdev: user-space parallel port driver
[ 12.402201] cfg80211: World regulatory domain updated:
[ 12.402202] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.402204] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.402205] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.402206] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.402207] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.402209] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.066137] Console: switching to colour frame buffer device 170x48
[ 13.068663] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.068665] i915 0000:00:02.0: registered panic notifier
[ 13.071512] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.071877] acpi device:17: registered as cooling_device4
[ 13.072154] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.072271] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.072545] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
[ 13.078139] hda-intel 0000:00:03.0: Using LPIB position fix
[ 13.078188] HDA driver get symbol successfully from i915 module
[ 13.078486] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
[ 13.086111] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
[ 13.257610] hda_codec: CX20751/2: BIOS auto-probing.
[ 13.257823] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 13.257826] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.257828] hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 13.257830] mono: mono_out=0x0
[ 13.257831] inputs:
[ 13.257833] Internal Mic=0x1a
[ 13.257835] Mic=0x19
[ 13.258508] hda_codec: Enable sync_write for stable communication
[ 13.261100] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 13.261261] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 13.263046] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 13.263151] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 13.263228] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 13.312304] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.314005] scsi2 : SCSI emulation for RTS5139 USB card reader
[ 13.314158] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 13.314176] usbcore: registered new interface driver rts5139
[ 13.314669] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 13.416178] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 13.518542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.518546] Bluetooth: BNEP filters: protocol multicast
[ 13.518555] Bluetooth: BNEP socket layer initialized
[ 13.681344] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.681586] rtlwifi: wireless switch is on
[ 13.777851] Bluetooth: RFCOMM TTY layer initialized
[ 13.777865] Bluetooth: RFCOMM socket layer initialized
[ 13.777872] Bluetooth: RFCOMM ver 1.11
[ 14.099277] init: failsafe main process (983) killed by TERM signal
[ 14.210267] Linux video capture interface: v2.00
[ 15.244509] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (05e3:0510)
[ 15.299254] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input13
[ 15.299348] usbcore: registered new interface driver uvcvideo
[ 15.299351] USB Video Class driver (1.1.1)
[ 20.272479] r8169 0000:02:00.0: Direct firmware load failed with error -2
[ 20.272484] r8169 0000:02:00.0: Falling back to user helper
[ 20.322520] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8106e-2.fw (-2)
[ 20.329519] r8169 0000:02:00.0 eth0: link down
[ 20.329568] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.605105] audit_printk_skb: 15 callbacks suppressed
[ 20.605109] type=1400 audit(1513257017.375:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1244 comm="apparmor_parser"
[ 20.605115] type=1400 audit(1513257017.375:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1244 comm="apparmor_parser"
[ 20.605119] type=1400 audit(1513257017.375:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1244 comm="apparmor_parser"
[ 20.605566] type=1400 audit(1513257017.375:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1244 comm="apparmor_parser"
[ 20.605570] type=1400 audit(1513257017.375:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1244 comm="apparmor_parser"
[ 20.605801] type=1400 audit(1513257017.375:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1244 comm="apparmor_parser"
[ 20.608769] type=1400 audit(1513257017.379:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1248 comm="apparmor_parser"
[ 20.608777] type=1400 audit(1513257017.379:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1248 comm="apparmor_parser"
[ 20.609284] type=1400 audit(1513257017.379:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1248 comm="apparmor_parser"
[ 20.696813] type=1400 audit(1513257017.467:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1243 comm="apparmor_parser"
[ 23.962521] init: anacron main process (1314) killed by TERM signal
[ 37.697303] usb 2-6: reset high-speed USB device number 3 using xhci_hcd
[ 37.754488] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036157800
[ 143.611025] usb 2-2: new full-speed USB device number 5 using xhci_hcd
[ 143.629818] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 143.629828] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 143.629833] usb 2-2: Product: LUFA CDC Demo
[ 143.629837] usb 2-2: Manufacturer: Dean Camera
[ 143.629841] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 143.630131] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 143.709265] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 143.709605] usbcore: registered new interface driver cdc_acm
[ 143.709610] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 151.554762] usb 2-2: USB disconnect, device number 5
[ 162.924045] usb 2-2: new full-speed USB device number 6 using xhci_hcd
[ 162.942827] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 162.942837] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 162.942842] usb 2-2: Product: LUFA CDC Demo
[ 162.942846] usb 2-2: Manufacturer: Dean Camera
[ 162.942850] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 162.943141] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 162.943646] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 182.332904] usb 2-2: USB disconnect, device number 6
[ 198.147312] usb 2-2: new full-speed USB device number 7 using xhci_hcd
[ 198.166099] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 198.166109] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 198.166114] usb 2-2: Product: LUFA CDC Demo
[ 198.166118] usb 2-2: Manufacturer: Dean Camera
[ 198.166122] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 198.166394] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 198.166867] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 245.172375] usb 2-2: USB disconnect, device number 7
[ 254.374990] usb 2-2: new full-speed USB device number 8 using xhci_hcd
[ 254.393438] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 254.393442] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 254.393445] usb 2-2: Product: LUFA CDC Demo
[ 254.393447] usb 2-2: Manufacturer: Dean Camera
[ 254.393448] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 254.393588] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 254.393940] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 304.219327] usb 2-2: USB disconnect, device number 8
[ 308.943264] usb 2-2: new full-speed USB device number 9 using xhci_hcd
[ 308.962055] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 308.962065] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 308.962070] usb 2-2: Product: LUFA CDC Demo
[ 308.962075] usb 2-2: Manufacturer: Dean Camera
[ 308.962079] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 308.962346] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 308.962819] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 310.789905] usb 2-2: USB disconnect, device number 9
[ 379.709699] usb 2-2: new full-speed USB device number 10 using xhci_hcd
[ 379.728387] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 379.728395] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 379.728399] usb 2-2: Product: LUFA CDC Demo
[ 379.728402] usb 2-2: Manufacturer: Dean Camera
[ 379.728406] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 379.728624] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 379.729053] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 559.484586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 561.925182] wlan0: authenticate with 62:28:6d:45:3b:d6
[ 561.944316] wlan0: send auth to 62:28:6d:45:3b:d6 (try 1/3)
[ 561.946171] wlan0: 62:28:6d:45:3b:d6 denied authentication (status 37)
[ 713.629760] wlan0: authenticate with e0:28:6d:45:3b:d6
[ 713.649456] wlan0: send auth to e0:28:6d:45:3b:d6 (try 1/3)
[ 713.651541] wlan0: authenticated
[ 713.652912] wlan0: associate with e0:28:6d:45:3b:d6 (try 1/3)
[ 713.756939] wlan0: associate with e0:28:6d:45:3b:d6 (try 2/3)
[ 713.860790] wlan0: associate with e0:28:6d:45:3b:d6 (try 3/3)
[ 713.964754] wlan0: association with e0:28:6d:45:3b:d6 timed out
[ 720.771224] wlan0: authenticate with e0:28:6d:45:3b:d6
[ 720.790996] wlan0: send auth to e0:28:6d:45:3b:d6 (try 1/3)
[ 720.793294] wlan0: authenticated
[ 720.794306] wlan0: associate with e0:28:6d:45:3b:d6 (try 1/3)
[ 720.799015] wlan0: RX AssocResp from e0:28:6d:45:3b:d6 (capab=0x431 status=0 aid=1)
[ 720.799222] wlan0: associated
[ 720.799264] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 720.799375] cfg80211: Calling CRDA for country: DE
[ 720.805239] cfg80211: Regulatory domain changed to country: DE
[ 720.805250] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 720.805258] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 720.805264] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 720.805269] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 720.805275] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 948.401265] usb 2-2: USB disconnect, device number 10
[ 965.662025] usb 2-2: new full-speed USB device number 11 using xhci_hcd
[ 965.680476] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 965.680480] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 965.680482] usb 2-2: Product: LUFA CDC Demo
[ 965.680484] usb 2-2: Manufacturer: Dean Camera
[ 965.680486] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 965.680641] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 965.680992] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
[ 1024.175513] usb 2-2: USB disconnect, device number 11
[ 1050.940468] usb 2-2: new full-speed USB device number 12 using xhci_hcd
[ 1050.959406] usb 2-2: New USB device found, idVendor=03eb, idProduct=2044
[ 1050.959415] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 1050.959421] usb 2-2: Product: LUFA CDC Demo
[ 1050.959425] usb 2-2: Manufacturer: Dean Camera
[ 1050.959429] usb 2-2: SerialNumber: 438503937383FFFFB0FFB1006000
[ 1050.959693] usb 2-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 1050.960167] cdc_acm 2-2:1.0: ttyACM0: USB ACM device

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017

It connects and is then disconnected. You could try and change the cable or it's an hardware issue, IMHO

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017 •
edited

I use the cable from the buying chameleon (Original)
hmm ok I change it
what is IMHO

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017 •
edited

from win10 and an other cable it is the same problem
mist

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017 •
edited

what is IMHO

In My Humble Opinion ;)

from win10 and an other cable it is the same problem

Then it looks like an hardware fault. Is this device brand new?
Have you tried another USB port or another computer altogether

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

hmmm
I find a Chameleon RevE Rebooted Software
with
BOOT_LOADER_EXE.exe
Chameleon_EN.exe
myfile.bin
myfilee.bin

an I try the Chameleon_EN.exe and click there to BootMode.
After that, I click the BOOT_LOADER_EXE.exe, And than he do something.
I have a picture from That.

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

it is a brand new from 2 Tays ago

@ceres-c
Copy link
Contributor

ceres-c commented Dec 14, 2017

I don't own you hardware so I have never had such a problem before and I can't help you further, actually. If I were you I'd just ask the seller and maybe they'll ask you to resend it to them to get a replacement
Really, I can't help you further as it looks like there is a problem with the USB interface (as seen with dmesg) but I don't own a chameleon, so I don't how it should behave or test for you.

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

ok

thank you for your help
and your time

@iceman1001
Copy link
Owner

Don't have to hardware. It could be modemmanager on ubuntu messing up.
or on win10, you need to install two drivers. One for the normal operation, the second for dfu-mode (bootloader).. If you didn't, the device will be not enumerated by your OS.

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017 •
edited

witch 2 driver I need for win 10?

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

If Have one for the bootloader modus

ATxmega32A4U

and

Normal Driver to connect it

Serielles USB-Device(COM8)

@iceman1001
Copy link
Owner

The drivers was a bit hidden before. So I added those two I got laying around in the Chameleon Mini folders.

/Drivers

45a0555

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

but in the Driver folder isn`t a .inf ...........

@iceman1001
Copy link
Owner

I rest my case. Good luck!

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017

I don`t understand!

@peseta3
Copy link
Author

peseta3 commented Dec 14, 2017 •
edited

If Have one for the bootloader modus

ATxmega32A4U

and

Normal Driver to connect it

Serielles USB-Device(COM8)

is this the right Driver?

@ghost ghost mentioned this issue Dec 19, 2017
Closed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@iceman1001 @peseta3 @ceres-c