Skip to content

Latest commit

 

History

History
224 lines (163 loc) · 7.79 KB

README.md

File metadata and controls

224 lines (163 loc) · 7.79 KB

owntracks-cli-publisher

OCLI logo

This is the OwnTracks command line interface publisher, a.k.a. owntracks-cli-publisher, a small utility which connects to gpsd and publishes position information in OwnTracks JSON to an MQTT broker in order for compatible software to process location data. (Read up on what OwnTracks does if you're new to it.)

gpsd

gpsd is a daemon that receives data from one or more GPS receivers and provides data to multiple applications via a TCP/IP service. GPS data thus obtained is processed by owntracks-cli-publisher and published via MQTT.

vk-172

We've been successful with a number of GPS receivers, some of which are very affordable. The small USB stick receiver in the above photo is called a VK172 and costs roughly €16.

Determining which USB port was obtained by the receiver can be challenging, but dmesg is useful to find out. Once you know the port, cross your fingers that it remains identical after a reboot, and ensure your gpsd service is running. For testing, we've found that launching it from a terminal is useful:

$ gpsd -n -D 2 -N /dev/tty.usbmodem1A121201

owntracks-cli-publisher

owntracks-cli-publisher operates with a number of defaults which you can override using environment variables.

The following defaults are used:

  • The MQTT base topic defaults to owntracks/<username>/<hostname>, where username is the name of the logged in user, and hostname the short host name. This base topic can be overridden by setting BASE_TOPIC in the environment.
  • The MQTT host and port are localhost and 1883 respectively, and can be set using MQTT_HOST and MQTT_PORT.
  • The MQTT clientId is set to "ocli-<username>-<hostname>", but it can be overridden by setting OCLI_CLIENTID in the environment.
  • TCP is used to connect to gpsd with localhost and 2947 being the default host and port, overridden by setting GPSD_HOST and GPSD_PORT.
  • The two-letter OwnTracks tracker ID can be configured by setting OCLI_TID; it defaults to not being used.
  • OCLI_INTERVAL defaults to 60 seconds.
  • OCLI_DISPLACEMENT defaults to 0 meters.
  • TLS can be enabled for the MQTT connection by specifying the path to a PEM CA certificate with which to verify peers in OCLI_CACERT. Note, that you'll likely need to also specify a different MQTT_PORT from the default.

owntracks-cli-publisher reads GPS data from gpsd and as soon as it has a fix it publishes an OwnTracks payload (see below). owntracks-cli-publisher will subsequently publish a message every OCLI_INTERVAL seconds or when it detects it has moved OCLI_DISPLACEMENT meters.

owntracks-cli-publisher with OwnTracks on macOS

payload

Any number of path names can be passed as arguments to owntracks-cli-publisher which interprets each in terms of an element which will be added to the OwnTracks JSON. The element name is the base name of the path. If a path points to an executable file the first line of stdout produced by that executable will be used as the key's value, otherwise the first line read from the file. In both cases, trailing newlines are removed from values.

$ echo 27.2 > parms/temp
$ owntracks-cli-publisher parms/temp contrib/platform

In this example, we use a file and a program. When owntracks-cli-publisher produces its JSON we'll see something like this:

{
  "_type": "location",
  "tst": 1577654651,
  "lat": 48.856826,

  "temp" : "27.2",
  "platform": "FreeBSD"
}

Note that a key may not overwrite JSON keys defined by owntracks-cli-publisher, so for example, a file called lat will not be accepted as it would clobber the latitude JSON element.

controlling owntracks-cli-publisher

It is possible to control owntracks-cli-publisher using a subset of OwnTrack's cmd commands.

$ t=owntracks/jpm/tiggr/cmd
$ mosquitto_pub -t $t -m "$(jo _type=cmd action=reportLocation)"

The following commands are currently implemented:

  • reportLocation causes owntracks-cli-publisher to publish its current location (providing gpsd has a fix). owntracks-cli-publisher sets t:m in the JSON indicating the publish was manually requested.

  • dump causes owntracks-cli-publisher to publish its internal configuration to the topic <basetopic>/dump as a _type: configuration message.

     {
       "_type": "configuration",
       "_npubs": 47,
       "clientId": "owntracks-ocli",
       "locatorInterval": 60,
       "locatorDisplacement": 0,
       "pubTopicBase": "owntracks/jpm/tiggr",
       "tid": "OC",
       "username": "jpm",
       "deviceId": "tiggr"
     }
  • setConfiguration permits setting some of owntracks-cli-publisher's internal values. Note that these do not persist a restart.

    $ mosquitto_pub -t $t -m "$(jo _type=cmd action=setConfiguration configuration=$(jo _type=configuration locatorInterval=10 locatorDisplacement=0))"
     {
       "_type": "cmd",
       "action": "setConfiguration",
       "configuration": {
         "_type": "configuration",
         "locatorInterval": 10,
         "locatorDisplacement": 0
       }
     }

testing

There is a small set of scripts with which you can test owntracks-cli-publisher without having a real GPS receiver. Please check contrib/fake/ for more information.

building

owntracks-cli-publisher should compile easily once you extract the source code and have the prerequisite libraries installed for linking against gpsd and the mosquitto library.

Systems we've tested on require the following packages in order to build owntracks-cli-publisher.

FreeBSD

# pkg install mosquitto gpsd
$ make

OpenBSD

# pkg_add mosquitto gpsd
$ make

macOS

$ brew install mosquitto gpsd
$ make

Debian

# apt-get install libmosquitto-dev libgps-dev
$ make

CentOS

# yum install openssl-devel
$ wget https://mosquitto.org/files/source/mosquitto-1.6.8.tar.gz
$ tar xf mosquitto-1.6.8.tar.gz
$ cd mosquitto-1.6.8/
$ make
# make install
# echo /usr/local/lib > /etc/ld.so.conf.d/mosquitto.conf
# ldconfig

# yum install python3-scons
$ wget http://download-mirror.savannah.gnu.org/releases/gpsd/gpsd-3.19.tar.gz
$ tar xf gpsd-3.19.tar.gz
$ cd gpsd-3.19/
$ /usr/bin/scons-3
# /usr/bin/scons-3 udev-install

$ cd ocli
$ make

systemd

This may be a way of getting owntracks-cli-publisher working on machines with systemd. Basically we need two things:

  1. an environment file, owntracks-cli-publisher.env:

    name="Testing"
    fixlog="/tmp/fix.log"
    BASE_TOPIC="m/bus/b001"
    MQTT_HOST="localhost"
    MQTT_PORT=1888
    GPSD_HOST="localhost"
    GPSD_PORT="2947"
    OCLI_TID="OC"
    
  2. a systemd Unit file:

    [Unit]
    Description=OwnTracks cli
    Requires=mosquitto.service
    
    [Service]
    Type=simple
    EnvironmentFile=/home/jpm/owntracks-cli-publisher.env
    ExecStartPre=/usr/bin/touch /tmp/ocli-started-${name}
    ExecStart=/home/jpm/bin/owntracks-cli-publisher
    Restart=always
    RestartSec=60
    User=mosquitto
    Group=mosquitto
    
    [Install]
    WantedBy=multi-user.target
    

Packages

Packages are available for select operating systems from the Github releases page. Note that the RPM packages do not contain an owntracks-cli-publisher.env file for systemd.

Credits