GitHub - imclab/huxley at https://githubhelp.com

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 98 Commits
Cut-sheet-parts		Cut-sheet-parts
Documentation		Documentation
OpenSCAD-huxley		OpenSCAD-huxley
Original-CAD		Original-CAD
RFO-files		RFO-files
alternative-parts		alternative-parts
.project		.project
MiniMendel.stp		MiniMendel.stp
base-reinforcement-clamp_2.stl		base-reinforcement-clamp_2.stl
bowden-extruder-base-clamp.stl		bowden-extruder-base-clamp.stl
drive-pulley_3off.stl		drive-pulley_3off.stl
extruder-bracket-bowden_1off.stl		extruder-bracket-bowden_1off.stl
frame-vertex-with-foot-4off.aoi		frame-vertex-with-foot-4off.aoi
frame-vertex-with-foot-4off.stl		frame-vertex-with-foot-4off.stl
frame-vertex_2off.stl		frame-vertex_2off.stl
pinch-wheel-bracket-603-nema17-bowden.stl		pinch-wheel-bracket-603-nema17-bowden.stl
readme.txt		readme.txt
roller-clamp_8off.stl		roller-clamp_8off.stl
x-180-bearing-clamp_2off.stl		x-180-bearing-clamp_2off.stl
x-axis-clamp_4off.stl		x-axis-clamp_4off.stl
x-axis-sandwich-clamp_1off.stl		x-axis-sandwich-clamp_1off.stl
x-axis-spacer_2off.stl		x-axis-spacer_2off.stl
x-bar-clamp_1off.stl		x-bar-clamp_1off.stl
x-bearing-clamp_2off.stl		x-bearing-clamp_2off.stl
x-belt-clamp_2off.stl		x-belt-clamp_2off.stl
x-blunt-plate_1off.stl		x-blunt-plate_1off.stl
x-carriage-lower-left_1off.stl		x-carriage-lower-left_1off.stl
x-carriage-lower-right_1off.stl		x-carriage-lower-right_1off.stl
x-carriage-upper_1off.stl		x-carriage-upper_1off.stl
x-motor-end-clamp_1off.stl		x-motor-end-clamp_1off.stl
xlr-bracket_1off.stl		xlr-bracket_1off.stl
y-bar-clamp_4off.stl		y-bar-clamp_4off.stl
y-bearing-180.stl		y-bearing-180.stl
y-bearing-360-bracket1.stl		y-bearing-360-bracket1.stl
y-belt-clamp_2.stl		y-belt-clamp_2.stl
y-belt-nut-trap.stl		y-belt-nut-trap.stl
y-flag.stl		y-flag.stl
y-idler-bracket_2.stl		y-idler-bracket_2.stl
y-motor-bracket.stl		y-motor-bracket.stl
z-bar-bottom-clamp.stl		z-bar-bottom-clamp.stl
z-bar-top-clamp_2.stl		z-bar-top-clamp_2.stl
z-driven-pulley-2off.stl		z-driven-pulley-2off.stl
z-driven-pulley-rim-2off.stl		z-driven-pulley-rim-2off.stl
z-leadscrew-base-motor_2.stl		z-leadscrew-base-motor_2.stl
z-leadscrew-base-tensioner_2.stl		z-leadscrew-base-tensioner_2.stl

Repository files navigation

The Mini-Mendel design is based on M3 Nuts and Bolts, M6 threaded rod, rather than M4s and M8s, giving a much more compact design. The build area is approximately equal to 100 x 100 mm; critically the replication time has been reduced by 66% N.B.  This is experimental and not supported.  The filament feed is also known not to work, and a bowden extruder is required.