Skip to content

Commit

Permalink
drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
Browse files Browse the repository at this point in the history
This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
  • Loading branch information
lynxeye-dev authored and intel-lab-lkp committed Dec 16, 2022
1 parent 63d0edb commit 27d7c37
Show file tree
Hide file tree
Showing 3 changed files with 210 additions and 0 deletions.
7 changes: 7 additions & 0 deletions drivers/gpu/drm/bridge/imx/Kconfig
Original file line number Diff line number Diff line change
Expand Up @@ -53,4 +53,11 @@ config DRM_IMX8MP_DW_HDMI_BRIDGE
Choose this to enable support for the internal HDMI encoder found
on the i.MX8MP SoC.

config DRM_IMX8MP_HDMI_PVI
tristate "i.MX8MP HDMI PVI bridge support"
depends on OF
help
Choose this to enable support for the internal HDMI TX Parallel
Video Interface found on the i.MX8MP SoC.

endif # ARCH_MXC || COMPILE_TEST
1 change: 1 addition & 0 deletions drivers/gpu/drm/bridge/imx/Makefile
Original file line number Diff line number Diff line change
Expand Up @@ -9,3 +9,4 @@ obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o

obj-$(CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE) += imx8mp-hdmi.o
obj-$(CONFIG_DRM_IMX8MP_HDMI_PVI) += imx8mp-hdmi-pvi.o
202 changes: 202 additions & 0 deletions drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c
Original file line number Diff line number Diff line change
@@ -0,0 +1,202 @@
// SPDX-License-Identifier: GPL-2.0+

/*
* Copyright (C) 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
*/

#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_crtc.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/pm_runtime.h>

#define HTX_PVI_CTL 0x0
#define PVI_CTL_OP_VSYNC_POL BIT(18)
#define PVI_CTL_OP_HSYNC_POL BIT(17)
#define PVI_CTL_OP_DE_POL BIT(16)
#define PVI_CTL_INP_VSYNC_POL BIT(14)
#define PVI_CTL_INP_HSYNC_POL BIT(13)
#define PVI_CTL_INP_DE_POL BIT(12)
#define PVI_CTL_INPUT_LCDIF BIT(2)
#define PVI_CTL_EN BIT(0)

struct imx8mp_hdmi_pvi {
struct drm_bridge bridge;
struct device *dev;
struct drm_bridge *next_bridge;
void __iomem *regs;
};

static inline struct imx8mp_hdmi_pvi *
to_imx8mp_hdmi_pvi(struct drm_bridge *bridge)
{
return container_of(bridge, struct imx8mp_hdmi_pvi, bridge);
}

static int imx8mp_hdmi_pvi_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);

return drm_bridge_attach(bridge->encoder, pvi->next_bridge,
bridge, flags);
}

static void imx8mp_hdmi_pvi_bridge_enable(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state)
{
struct drm_atomic_state *state = bridge_state->base.state;
struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);
struct drm_connector_state *conn_state;
const struct drm_display_mode *mode;
struct drm_crtc_state *crtc_state;
struct drm_connector *connector;
u32 bus_flags, val;

connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
conn_state = drm_atomic_get_new_connector_state(state, connector);
crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);

if (WARN_ON(pm_runtime_resume_and_get(pvi->dev)))
return;

mode = &crtc_state->adjusted_mode;

val = PVI_CTL_INPUT_LCDIF;

if (mode->flags & DRM_MODE_FLAG_PVSYNC)
val |= PVI_CTL_OP_VSYNC_POL | PVI_CTL_INP_VSYNC_POL;

if (mode->flags & DRM_MODE_FLAG_PHSYNC)
val |= PVI_CTL_OP_HSYNC_POL | PVI_CTL_INP_HSYNC_POL;

if (pvi->next_bridge->timings)
bus_flags = pvi->next_bridge->timings->input_bus_flags;
else if (bridge_state)
bus_flags = bridge_state->input_bus_cfg.flags;

if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
val |= PVI_CTL_OP_DE_POL | PVI_CTL_INP_DE_POL;

writel(val, pvi->regs + HTX_PVI_CTL);
val |= PVI_CTL_EN;
writel(val, pvi->regs + HTX_PVI_CTL);
}

static void imx8mp_hdmi_pvi_bridge_disable(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state)
{
struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);

writel(0x0, pvi->regs + HTX_PVI_CTL);

pm_runtime_put(pvi->dev);
}

static u32 *imx8mp_hdmi_pvi_bridge_get_input_bus_fmts(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts)
{
struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);
struct drm_bridge *next_bridge = pvi->next_bridge;
struct drm_bridge_state *next_state;

if (!next_bridge->funcs->atomic_get_input_bus_fmts)
return 0;

next_state = drm_atomic_get_new_bridge_state(crtc_state->state,
next_bridge);

return next_bridge->funcs->atomic_get_input_bus_fmts(next_bridge,
next_state,
crtc_state,
conn_state,
output_fmt,
num_input_fmts);
}

static const struct drm_bridge_funcs imx_hdmi_pvi_bridge_funcs = {
.attach = imx8mp_hdmi_pvi_bridge_attach,
.atomic_enable = imx8mp_hdmi_pvi_bridge_enable,
.atomic_disable = imx8mp_hdmi_pvi_bridge_disable,
.atomic_get_input_bus_fmts = imx8mp_hdmi_pvi_bridge_get_input_bus_fmts,
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
};

static int imx8mp_hdmi_pvi_probe(struct platform_device *pdev)
{
struct device_node *remote;
struct imx8mp_hdmi_pvi *pvi;

pvi = devm_kzalloc(&pdev->dev, sizeof(*pvi), GFP_KERNEL);
if (!pvi)
return -ENOMEM;

platform_set_drvdata(pdev, pvi);
pvi->dev = &pdev->dev;

pvi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pvi->regs))
return PTR_ERR(pvi->regs);

/* Get the next bridge in the pipeline. */
remote = of_graph_get_remote_node(pdev->dev.of_node, 1, -1);
if (!remote)
return -EINVAL;

pvi->next_bridge = of_drm_find_bridge(remote);
of_node_put(remote);

if (!pvi->next_bridge)
return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
"could not find next bridge\n");

/* Register the bridge. */
pvi->bridge.funcs = &imx_hdmi_pvi_bridge_funcs;
pvi->bridge.of_node = pdev->dev.of_node;
pvi->bridge.timings = pvi->next_bridge->timings;

drm_bridge_add(&pvi->bridge);

pm_runtime_enable(&pdev->dev);

return 0;
}

static int imx8mp_hdmi_pvi_remove(struct platform_device *pdev)
{
struct imx8mp_hdmi_pvi *pvi = platform_get_drvdata(pdev);

drm_bridge_remove(&pvi->bridge);

return 0;
}

static const struct of_device_id imx8mp_hdmi_pvi_match[] = {
{
.compatible = "fsl,imx8mp-hdmi-pvi",
}, {
/* sentinel */
},
};
MODULE_DEVICE_TABLE(of, imx8mp_hdmi_pvi_match);

static struct platform_driver imx8mp_hdmi_pvi_driver = {
.probe = imx8mp_hdmi_pvi_probe,
.remove = imx8mp_hdmi_pvi_remove,
.driver = {
.name = "imx-hdmi-pvi",
.of_match_table = imx8mp_hdmi_pvi_match,
},
};
module_platform_driver(imx8mp_hdmi_pvi_driver);

MODULE_DESCRIPTION("i.MX8MP HDMI TX Parallel Video Interface bridge driver");
MODULE_LICENSE("GPL");

0 comments on commit 27d7c37

Please sign in to comment.