ARM: dts: qcom: sdx65: Add support for PCIe PHY

Add devicetree support for PCIe PHY used in SDX65 platform. This PHY is
used by the PCIe EP controller.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>

arch/arm/boot/dts/qcom-sdx65.dtsi

@@ -293,6 +293,39 @@
 			status = "disabled";
 		};
 
+		pcie_phy: phy@1c06000 {
+			compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
+			reg = <0x01c06000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+				 <&gcc GCC_PCIE_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x40000>;