Merge tag 'lts-v5.15.21-linux-220222T001242Z' into lts2021/preempt-rt

Creating tag for lts-v5.15.21-linux-220222T001242Z

* tag 'lts-v5.15.21-linux-220222T001242Z': (2399 commits)
  drm/amdgpu: fix logic inversion in check
  drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled
  drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
  drm/amd/display: revert "Reset fifo after enable otg"
  drm/amd/display: watermark latencies is not enough on DCN31
  drm/amd/display: Update watermark values for DCN301
  drm/amdgpu: fix a potential GPU hang on cyan skillfish
  drm/amd: Only run s3 or s0ix if system is configured properly
  drm/amd: add support to check whether the system is set to s3
  drm/i915/pmu: Fix KMD and GuC race on accessing busyness
  drm/amd: Warn users about potential s0ix problems
  drm/amd/pm: correct the MGpuFanBoost support for Beige Goby
  drm/nouveau: fix off by one in BIOS boundary checking
  drm/i915/adlp: Fix TypeC PHY-ready status readout
  drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for reference
  drm/i915/overlay: Prevent divide by zero bugs in scaling
  drm/i915: Lock timeline mutex directly in error path of eb_pin_timeline
  drm/i915: Allocate intel_engine_coredump_alloc with ALLOW_FAIL
  drm/kmb: Fix for build errors with Warray-bounds
  drm/privacy-screen: honor acpi=off in detect_thinkpad_privacy_screen
  ...

.mailmap

@@ -10,10 +10,12 @@
 # Please keep this list dictionary sorted.
 #
 Aaron Durbin <adurbin@google.com>
+Abhinav Kumar <quic_abhinavk@quicinc.com> <abhinavk@codeaurora.org>
 Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
 Adriana Reus <adi.reus@gmail.com> <adriana.reus@intel.com>
 Adrian Bunk <bunk@stusta.de>
+Akhil P Oommen <quic_akhilpo@quicinc.com> <akhilpo@codeaurora.org>
 Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
 Aleksandar Markovic <aleksandar.markovic@mips.com> <aleksandar.markovic@imgtec.com>
@@ -164,6 +166,7 @@ Jeff Layton <jlayton@kernel.org> <jlayton@redhat.com>
 Jens Axboe <axboe@suse.de>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
 Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
+Jessica Zhang <quic_jesszhan@quicinc.com> <jesszhan@codeaurora.org>
 Jiri Slaby <jirislaby@kernel.org> <jirislaby@gmail.com>
 Jiri Slaby <jirislaby@kernel.org> <jslaby@novell.com>
 Jiri Slaby <jirislaby@kernel.org> <jslaby@suse.com>
@@ -183,6 +186,7 @@ Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>
 Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
+Kalyan Thota <quic_kalyant@quicinc.com> <kalyan_t@codeaurora.org>
 Kay Sievers <kay.sievers@vrfy.org>
 Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
 Kees Cook <keescook@chromium.org> <keescook@google.com>
@@ -194,9 +198,11 @@ Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krishna Manikandan <quic_mkrishn@quicinc.com> <mkrishn@codeaurora.org>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+Kuogee Hsieh <quic_khsieh@quicinc.com> <khsieh@codeaurora.org>
 Leonardo Bras <leobras.c@gmail.com> <leonardo@linux.ibm.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Leon Romanovsky <leon@kernel.org> <leon@leon.nu>
@@ -302,6 +308,7 @@ Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
+Rajeev Nandan <quic_rajeevny@quicinc.com> <rajeevny@codeaurora.org>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
@@ -316,6 +323,7 @@ Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
 Sakari Ailus <sakari.ailus@linux.intel.com> <sakari.ailus@iki.fi>
 Sam Ravnborg <sam@mars.ravnborg.org>
+Sankeerth Billakanti <quic_sbillaka@quicinc.com> <sbillaka@codeaurora.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Sarangdhar Joshi <spjoshi@codeaurora.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -3527,6 +3527,13 @@
 			shutdown the other cpus.  Instead use the REBOOT_VECTOR
 			irq.
 
+	nomodeset	Disable kernel modesetting. DRM drivers will not perform
+			display-mode changes or accelerated rendering. Only the
+			system framebuffer will be available for use if this was
+			set-up by the firmware or boot loader.
+
+			Useful as fallback, or for testing and debugging.
+
 	nomodule	Disable module load
 
 	nopat		[X86] Disable PAT (page attribute table extension of

Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml

@@ -43,14 +43,70 @@ properties:
   vdd33-supply:
     description: Regulator that provides the supply 3.3V power.
 
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
-          Video port for MIPI DSI input.
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [1, 5]
+                default: 1
+
+              data-lanes: true
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -87,6 +143,9 @@ examples:
             vdd10-supply = <&pp1000_mipibrdg>;
             vdd18-supply = <&pp1800_mipibrdg>;
             vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
 
             ports {
                 #address-cells = <1>;
@@ -96,6 +155,8 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
+                        bus-type = <5>;
+                        data-lanes = <0 1 2 3>;
                     };
                 };
 

Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml

@@ -64,13 +64,48 @@ properties:
       - port@0
       - port@1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
     maxItems: 1
 
   power-supply: true
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              properties:
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
+
 required:
   - compatible
   - ports

Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml

@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...