Skip to content
RPI-Monitor Adapter for ioBroker
JavaScript HTML
Branch: master
Clone or download
Pull request Compare This branch is 43 commits ahead of GermanBluefox:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
admin
img
lib
test
.gitignore
.npmignore
.travis.yml
LICENSE
README.md
gulpfile.js
io-package.json
main.js
package.json

README.md

Logo ioBroker RPI-Monitor Adapter

Number of Installations Number of Installations NPM version Downloads

NPM

RPI-Monitor implementation for integration into ioBroker. It is the same implementation as for iobroker.rpi, but with GPIOs.

Important Information

Works only with node >= 0.12

ioBroker must run under root to may control GPIOs.

Installation

After installation you have to configure all required modules via administration page.

After start of iobroker.rpi, all selected modules generates an object tree in ioBroker within rpi.. e.g. rpi.0.cpu

Be sure, that python and build-essential are installed:

sudo apt-get update
sudo apt-get install -y build-essential python

Following Objects are available after selection:

CPU

  • cpu_frequency
  • load1
  • load5
  • load15

Raspberry (vcgencmd is required)

  • cpu_voltage
  • mem_arm
  • mem_gpu

Memory

  • memory_available
  • memory_free
  • memory_total

Network (eth0)

  • net_received
  • net_send

SDCard

  • sdcard_boot_total
  • sdcard_boot_used
  • sdcard_root_total
  • sdcard_root_used

Swap

  • swap_total
  • swap_used

Temperature

  • soc_temp

Uptime

  • uptime

WLAN

  • wifi_received
  • wifi_send

Configuration

On configuration page you can select following modules:

  • CPU
  • Raspberry
  • Memory
  • Network
  • SDCard
  • Swap
  • Temperature
  • Uptime
  • WLAN

Logfiles / Configuration Settings

Features

Todo

Tested Hardware

  • Odroid C1
  • Raspberry Pi 1

GPIOs

You can read and control GPIOs too. All what you need to do is to configure in the settings the GPIOs options (additional tab).

GPIOs

After some ports are enabled following states appear in the object tree:

  • rpi.0.gpio.PORT.state

The numeration of ports is BCM (BroadComm pins on chip). You can get the enumeration with gpio readall. For instance PI2:

+-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+
| BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
|     |     |    3.3v |      |   |  1 || 2  |   |      | 5v      |     |     |
|   2 |   8 |   SDA.1 | ALT0 | 1 |  3 || 4  |   |      | 5V      |     |     |
|   3 |   9 |   SCL.1 | ALT0 | 1 |  5 || 6  |   |      | 0v      |     |     |
|   4 |   7 | GPIO. 7 |   IN | 1 |  7 || 8  | 0 | IN   | TxD     | 15  | 14  |
|     |     |      0v |      |   |  9 || 10 | 1 | IN   | RxD     | 16  | 15  |
|  17 |   0 | GPIO. 0 |   IN | 0 | 11 || 12 | 0 | IN   | GPIO. 1 | 1   | 18  |
|  27 |   2 | GPIO. 2 |   IN | 0 | 13 || 14 |   |      | 0v      |     |     |
|  22 |   3 | GPIO. 3 |   IN | 0 | 15 || 16 | 0 | IN   | GPIO. 4 | 4   | 23  |
|     |     |    3.3v |      |   | 17 || 18 | 0 | IN   | GPIO. 5 | 5   | 24  |
|  10 |  12 |    MOSI |   IN | 0 | 19 || 20 |   |      | 0v      |     |     |
|   9 |  13 |    MISO |   IN | 0 | 21 || 22 | 1 | IN   | GPIO. 6 | 6   | 25  |
|  11 |  14 |    SCLK |   IN | 0 | 23 || 24 | 1 | IN   | CE0     | 10  | 8   |
|     |     |      0v |      |   | 25 || 26 | 1 | IN   | CE1     | 11  | 7   |
|   0 |  30 |   SDA.0 |   IN | 1 | 27 || 28 | 1 | IN   | SCL.0   | 31  | 1   |
|   5 |  21 | GPIO.21 |   IN | 1 | 29 || 30 |   |      | 0v      |     |     |
|   6 |  22 | GPIO.22 |   IN | 1 | 31 || 32 | 0 | IN   | GPIO.26 | 26  | 12  |
|  13 |  23 | GPIO.23 |   IN | 0 | 33 || 34 |   |      | 0v      |     |     |
|  19 |  24 | GPIO.24 |   IN | 0 | 35 || 36 | 0 | IN   | GPIO.27 | 27  | 16  |
|  26 |  25 | GPIO.25 |  OUT | 1 | 37 || 38 | 0 | IN   | GPIO.28 | 28  | 20  |
|     |     |      0v |      |   | 39 || 40 | 0 | IN   | GPIO.29 | 29  | 21  |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
+-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+

Changelog

1.1.1

  • (Apollon77) Error messages for not existing values are logged only once

1.1.0

  • (Apollon77) Nodejs 10 support

1.0.0 (2018-08-20)

  • (bluefox) Admin3 support

0.3.2 (2017-11-29)

  • (Homoran) fixed Mem available readings on Stretch

0.3.1 (2017-01-11)

  • (olifre) Fixup swap_used calculation.

0.2.2 (2016-12-01)

  • (bluefox) Add GPIO direction indication

0.2.2 (2016-11-22)

  • (bluefox) Use BCM enumeration

0.2.1 (2016-10-29)

  • (bluefox) fix start of adapter

0.2.0 (2016-10-23)

  • (bluefox) just version change

0.1.1 (2016-10-13)

  • (bluefox) implement GPIOs control

0.0.4 (2016-03-25)

  • (bluefox) Try catch by eval (bluefox) do not process if exec fails

0.0.3 (2015-12-28)

  • (husky-koglhof) Fixed value calc. Set Value to 2 digits

0.0.2 (2015-12-26)

  • (husky-koglhof) Workaround for node 0.10.x
  • (bluefox) Some Fixes

0.0.1 (2015-12-23)

  • Initial commit. Alpha Version.

License

Copyright (c) 2015-2018 husky-koglhof husky.koglhof@icloud.com

MIT License

You can’t perform that action at this time.