Create basic package architecture

.gitignore

@@ -0,0 +1,3 @@
+*.pyc
+*~
+/docs/_build/

AUTHORS.rst

@@ -0,0 +1,7 @@
+######################
+Authors & contributors
+######################
+
+* Sébastien Barbier <sebastien.barbier@ionyse.com>
+* Rémy Hubscher <remy.hubscher@ionyse.com>
+* Amaury Pernette <amaury.pernette@ionyse.com>

CHANGELOG.rst

@@ -0,0 +1,8 @@
+Changelog
+=========
+
+0.1 (unreleased)
+----------------
+
+- Initialize the depot
+- Port the draft code to the new depot

INSTALL.rst

@@ -0,0 +1,38 @@
+===============
+Getting Started
+===============
+
+1. Get the code
+===============
+
+The development version
+-----------------------
+
+To be able to hack on the code::
+
+    $ cd ~/git/
+    $ git clone https://github.com/ionyse/ionyweb.git
+    $ cd ionyweb
+    $ mkvirtualenv ionyweb
+    (ionyweb)$ python setup.py develop
+
+
+To install the last stable version
+----------------------------------
+
+Using pip::
+
+    $ pip install ionyweb
+
+or::
+
+    $ pip install -e git+git://github.com/ionyse/ionyweb.git#egg=ionyweb
+
+2. Starts a new Ionyweb project
+===============================
+
+::
+
+    $ workon ionyweb
+    (ionyweb)$ ionyweb-quickstart <NewProject>
+

LICENSE

@@ -0,0 +1,33 @@
+#######
+License
+#######
+
+Copyright (c) 2009-2012, Sébastien Barbier
+Copyright (c) 2009-2012, Rémy Hubscher
+Copyright (c) 2009-2012, Amaury Pernette
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+* Neither the name of wardrobe nor the names of its contributors
+  may be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

MANIFEST.in

@@ -0,0 +1,5 @@
+recursive-include ionyweb *
+global-exclude *.pyc .*.swp
+include *.txt
+include *.rst
+include AUTHORS CHANGELOG INSTALL LICENSE README VERSION

Makefile

@@ -0,0 +1,75 @@
+# Makefile for development.
+# See INSTALL and docs/dev.txt for details.
+SHELL = /bin/bash
+PROJECT = 'django-downloadview'
+ROOT_DIR = $(shell pwd)
+DATA_DIR = $(ROOT_DIR)/var
+VIRTUALENV = virtualenv
+VIRTUALENV_DIR = $(ROOT_DIR)/lib/virtualenv
+PIP = $(VIRTUALENV_DIR)/bin/pip
+BUILDOUT = $(ROOT_DIR)/bin/buildout
+BUILDOUT_ARGS = -N
+
+
+virtualenv:
+	if [ ! -x $(PIP) ]; then \
+	    if [[ "`$(VIRTUALENV) --version`" < "`echo '1.8'`" ]]; then \
+	        $(VIRTUALENV) --no-site-packages --distribute $(VIRTUALENV_DIR); \
+	    else \
+	        $(VIRTUALENV) $(VIRTUALENV_DIR); \
+	    fi; \
+	    $(PIP) install -U pip; \
+	fi
+
+
+buildout:
+	# Install zc.buildout.
+	if [ ! -x $(BUILDOUT) ]; then \
+	    mkdir -p $(ROOT_DIR)/lib/buildout; \
+	    $(PIP) install zc.buildout; \
+	    mkdir -p `dirname $(BUILDOUT)`; \
+	    ln -s $(VIRTUALENV_DIR)/bin/buildout $(BUILDOUT); \
+	fi
+	# Run zc.buildout.
+	$(BUILDOUT) $(BUILDOUT_ARGS)
+
+
+develop: virtualenv buildout
+
+
+update: develop
+
+
+clean:
+	find $(ROOT_DIR)/ -name "*.pyc" -delete
+	find $(ROOT_DIR)/ -name ".noseids" -delete
+	rm nosetests.xml
+
+
+distclean: clean
+	rm -rf $(ROOT_DIR)/*.egg-info
+
+
+maintainer-clean: distclean
+	rm -rf $(ROOT_DIR)/bin/
+	rm -rf $(ROOT_DIR)/lib/
+
+
+test:
+	bin/demo test demo
+
+
+apidoc:
+	rm -rf docs/api/*
+	bin/sphinx-apidoc --suffix txt --output-dir $(ROOT_DIR)/docs/api django_downloadview
+
+
+sphinx:
+	make --directory=docs clean html doctest
+
+
+documentation: apidoc sphinx
+
+
+release:
+	bin/fullrelease

VERSION

@@ -0,0 +1 @@
+0.1dev

docs/Makefile

@@ -0,0 +1,153 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = _build
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	-rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/django-downloadview.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/django-downloadview.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/django-downloadview"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/django-downloadview"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."