does this only work with English language system?

[prankousky]

Checklist:

• I updated to the latest version available
• I checked that my MQTT broker is otherwise working

Hardware, Operating System, Python version:

• python3 --version = Python 3.7.3
• uname -a = Linux pi4 4.19.97-v7l+ #1294 SMP Thu Jan 30 13:21:14 GMT 2020 armv7l GNU/Linux

Description of problem:

When I run python3 /opt/RPi-Reporter-MQTT2HA-Daemon/ISP-RPi-mqtt-daemon.py, I get the output below. I assume the ValueError is caused because the script expects something in English, but receives '1M-Blöcke', which is German.

Run our report script 'genBugInfo' on your failing device and include the output here:

# SCRIPT genBugInfo v1.0 run 20/08/05-16:56:52
# ----------------------------------------------------------------------

# /bin/cat /etc/apt/sources.list | /bin/egrep -v '#'
  
deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi

 ----

# /bin/cat /etc/apt/sources.list | /bin/egrep -v '#' | /usr/bin/awk '{ print  }' | /bin/grep . | /usr/bin/sort -u
  
buster

 ----

# /bin/uname -r
  
4.19.97-v7l+

 ----

# /bin/hostname -f
  
pi4

 ----

# /usr/bin/uptime
  
 16:56:52 up 1 day, 17 min,  2 users,  load average: 0,01, 0,23, 0,16

 ----

# /sbin/ifconfig
  
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 9b  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Lokale Schleife)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.100.197  netmask 255.255.255.0  broadcast 192.168.100.255
        inet6 fc15  prefixlen 64  scopeid 0x20<link>
        ether 9d  txqueuelen 1000  (Ethernet)
        RX packets 715740  bytes 879183621 (838.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 228173  bytes 24967680 (23.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


 ----

# /sbin/ifconfig | /bin/egrep 'Link|flags|inet|ether' | /bin/egrep -v -i 'lo:|loopback|inet6|\:\:1|127\.0\.0\.1'
  
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 9b  txqueuelen 1000  (Ethernet)
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.100.197  netmask 255.255.255.0  broadcast 192.168.100.255
        ether 9d  txqueuelen 1000  (Ethernet)

 ----

# /sbin/route
  
Kernel-IP-Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
default         192.168.100.1   0.0.0.0         UG    303    0        0 wlan0
192.168.100.0   0.0.0.0         255.255.255.0   U     303    0        0 wlan0

 ----

Python errors shown in the logs (if applicable):

none

Additional information:

As stated above, I assume this is due to my output being in a different language. Is this fixable, i.e. by changing some value in the .py file by hand? Or am I out of luck unless I set my system to English?

Thank you for your help.

[ironsheep]

Fixes are committed, and appear in v1.4.1 and later.
Please update to the latest and let me know if it's working now.