[Feature] DIYRuZ_Flower - soil measurement

[WojtekWro]

Please use the template and fill in all the data requested below!

Problem description
DIYRuZ_Flower does not show a soil measurement.
I wish to see a soil measurement in homekit, because I want to use it in my watering automations. As we know, a soil measurement is still not supported by HomeKit.

Suggested solution
A soil measurement is represented by percentage. I think, that the only solution is showing it as a humidity.

Describe alternatives you've considered
Another idea is to make a fake switch which is changing its state depends on soil measurement. When the measurement is below some particular level, the switch is OFF, when it goes above this level it switches to ON. But in this case we should have possibility, to set this level individualy.

Additional context
This is how Home app shows this device:

Controller for homekit

And Zigbee2Mqtt user interface

"0x00124b002721aed7": {
            "date_code": "22/04/2021 11:13",
            "definition": {
                "description": "[Flower sensor](http://modkam.ru/?p=1700)",
                "exposes": [
                    {
                        "access": 1,
                        "description": "Measured soil moisture value",
                        "name": "soil_moisture",
                        "property": "soil_moisture",
                        "type": "numeric",
                        "unit": "%"
                    },
                    {
                        "access": 1,
                        "description": "Remaining battery in %",
                        "name": "battery",
                        "property": "battery",
                        "type": "numeric",
                        "unit": "%",
                        "value_max": 100,
                        "value_min": 0
                    },
                    {
                        "access": 1,
                        "description": "Raw measured illuminance",
                        "name": "illuminance",
                        "property": "illuminance",
                        "type": "numeric"
                    },
                    {
                        "access": 1,
                        "description": "Measured relative humidity",
                        "name": "humidity",
                        "property": "humidity",
                        "type": "numeric",
                        "unit": "%"
                    },
                    {
                        "access": 1,
                        "description": "The measured atmospheric pressure",
                        "name": "pressure",
                        "property": "pressure",
                        "type": "numeric",
                        "unit": "hPa"
                    },
                    {
                        "access": 1,
                        "description": "Measured temperature value",
                        "endpoint": "ds",
                        "name": "temperature",
                        "property": "temperature_ds",
                        "type": "numeric",
                        "unit": "°C"
                    },
                    {
                        "access": 1,
                        "description": "Measured temperature value",
                        "endpoint": "bme",
                        "name": "temperature",
                        "property": "temperature_bme",
                        "type": "numeric",
                        "unit": "°C"
                    },
                    {
                        "access": 1,
                        "description": "Link quality (signal strength)",
                        "name": "linkquality",
                        "property": "linkquality",
                        "type": "numeric",
                        "unit": "lqi",
                        "value_max": 255,
                        "value_min": 0
                    }
                ],
                "model": "DIYRuZ_Flower",
                "options": [
                    {
                        "access": 2,
                        "description": "Number of digits after decimal point for temperature, takes into effect on next report of device.",
                        "name": "temperature_precision",
                        "property": "temperature_precision",
                        "type": "numeric",
                        "value_max": 3,
                        "value_min": 0
                    },
                    {
                        "access": 2,
                        "description": "Calibrates the temperature value (absolute offset), takes into effect on next report of device.",
                        "name": "temperature_calibration",
                        "property": "temperature_calibration",
                        "type": "numeric"
                    },
                    {
                        "access": 2,
                        "description": "Number of digits after decimal point for humidity, takes into effect on next report of device.",
                        "name": "humidity_precision",
                        "property": "humidity_precision",
                        "type": "numeric",
                        "value_max": 3,
                        "value_min": 0
                    },
                    {
                        "access": 2,
                        "description": "Calibrates the humidity value (absolute offset), takes into effect on next report of device.",
                        "name": "humidity_calibration",
                        "property": "humidity_calibration",
                        "type": "numeric"
                    },
                    {
                        "access": 2,
                        "description": "Number of digits after decimal point for illuminance, takes into effect on next report of device.",
                        "name": "illuminance_precision",
                        "property": "illuminance_precision",
                        "type": "numeric",
                        "value_max": 3,
                        "value_min": 0
                    },
                    {
                        "access": 2,
                        "description": "Calibrates the illuminance value (percentual offset), takes into effect on next report of device.",
                        "name": "illuminance_calibration",
                        "property": "illuminance_calibration",
                        "type": "numeric"
                    },
                    {
                        "access": 2,
                        "description": "Number of digits after decimal point for illuminance_lux, takes into effect on next report of device.",
                        "name": "illuminance_lux_precision",
                        "property": "illuminance_lux_precision",
                        "type": "numeric",
                        "value_max": 3,
                        "value_min": 0
                    },
                    {
                        "access": 2,
                        "description": "Calibrates the illuminance_lux value (percentual offset), takes into effect on next report of device.",
                        "name": "illuminance_lux_calibration",
                        "property": "illuminance_lux_calibration",
                        "type": "numeric"
                    },
                    {
                        "access": 2,
                        "description": "Number of digits after decimal point for soil_moisture, takes into effect on next report of device.",
                        "name": "soil_moisture_precision",
                        "property": "soil_moisture_precision",
                        "type": "numeric",
                        "value_max": 3,
                        "value_min": 0
                    },
                    {
                        "access": 2,
                        "description": "Calibrates the soil_moisture value (absolute offset), takes into effect on next report of device.",
                        "name": "soil_moisture_calibration",
                        "property": "soil_moisture_calibration",
                        "type": "numeric"
                    },
                    {
                        "access": 2,
                        "description": "Number of digits after decimal point for pressure, takes into effect on next report of device.",
                        "name": "pressure_precision",
                        "property": "pressure_precision",
                        "type": "numeric",
                        "value_max": 3,
                        "value_min": 0
                    },
                    {
                        "access": 2,
                        "description": "Calibrates the pressure value (absolute offset), takes into effect on next report of device.",
                        "name": "pressure_calibration",
                        "property": "pressure_calibration",
                        "type": "numeric"
                    }
                ],
                "supports_ota": false,
                "vendor": "DIYRuZ"
            },
            "endpoints": {
                "1": {
                    "bindings": [
                        {
                            "cluster": "genPowerCfg",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        },
                        {
                            "cluster": "msTemperatureMeasurement",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        },
                        {
                            "cluster": "msRelativeHumidity",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        },
                        {
                            "cluster": "msPressureMeasurement",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        },
                        {
                            "cluster": "msIlluminanceMeasurement",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        },
                        {
                            "cluster": "msSoilMoisture",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        }
                    ],
                    "clusters": {
                        "input": [
                            "genBasic"
                        ],
                        "output": [
                            "genPowerCfg",
                            "msIlluminanceMeasurement",
                            "msTemperatureMeasurement",
                            "msPressureMeasurement",
                            "msRelativeHumidity",
                            "msSoilMoisture"
                        ]
                    },
                    "configured_reportings": [
                        {
                            "attribute": "batteryVoltage",
                            "cluster": "genPowerCfg",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        },
                        {
                            "attribute": "batteryPercentageRemaining",
                            "cluster": "genPowerCfg",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        },
                        {
                            "attribute": "measuredValue",
                            "cluster": "msTemperatureMeasurement",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        },
                        {
                            "attribute": "measuredValue",
                            "cluster": "msRelativeHumidity",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        },
                        {
                            "attribute": "scaledValue",
                            "cluster": "msPressureMeasurement",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        },
                        {
                            "attribute": "measuredValue",
                            "cluster": "msIlluminanceMeasurement",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        },
                        {
                            "attribute": "measuredValue",
                            "cluster": "msSoilMoisture",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        }
                    ],
                    "scenes": []
                },
                "2": {
                    "bindings": [
                        {
                            "cluster": "msTemperatureMeasurement",
                            "target": {
                                "endpoint": 1,
                                "ieee_address": "0x00212effff08b5e4",
                                "type": "endpoint"
                            }
                        }
                    ],
                    "clusters": {
                        "input": [],
                        "output": [
                            "msTemperatureMeasurement"
                        ]
                    },
                    "configured_reportings": [
                        {
                            "attribute": "measuredValue",
                            "cluster": "msTemperatureMeasurement",
                            "maximum_report_interval": 3600,
                            "minimum_report_interval": 0,
                            "reportable_change": 0
                        }
                    ],
                    "scenes": []
                }
            },
            "friendly_name": "Pomiar Gleby",
            "ieee_address": "0x00124b002721aed7",
            "interview_completed": true,
            "interviewing": false,
            "manufacturer": "modkam.ru",
            "model_id": "DIYRuZ_Flower",
            "network_address": 36155,
            "power_source": "Battery",
            "software_build_id": "22/04/2021 11:13",
            "supported": true,
            "type": "EndDevice"
        }
    },

Are you willing to contribute to this feature?
Yes / No, because...

[WojtekWro]

I have an idea. What if I replace "soil_moisture" in configuration with "humidity" ?
What consequences of this change may happen to me?
NOW
{
"access": 1,
"description": "Measured soil moisture value",
"name": "soil_moisture",
"property": "soil_moisture",
"type": "numeric",
"unit": "%"
},
AFTER CHANGE
{
"access": 1,
"description": "Measured soil moisture value",
"name": "soil_moisture",
"property": "humidity",
"type": "numeric",
"unit": "%"
},

[itavero]

Worked on an implementation, but ran into some issues while testing it (not yet sure if its the cache from Home.app messing with me or not).

[WojtekWro]

Hi @itavero
I hope you are doing well.
I know you are busy, but maybe I can help you with this somehow. Do you need some data or some tests?
I really appreciate your work :)
Thanks, Wojtek

[stale]

It appears that this issue did not have an update in quite some time. Please check if you can provide any additional information to help resolve this issue. If there isn't any activity in the next two weeks, this issue will be closed automatically. Thank you for your contributions!