Skip to content

itead/Sonoff_Devices_DIY_Tools

master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Code

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
August 5, 2019 14:11
August 7, 2019 16:38
August 7, 2019 14:38
April 30, 2019 15:35
April 2, 2020 15:33

Sonoff Devices DIY Tools

(@Follows the BSD open source license)

Introduction

Sonoff Devices DIY Tools is used for SONOFF Devices(Basic R3,RFR3 and Mini) control via LAN.

PS:

firmware version 3.3.0 and 3.4.0 refer to the protocol v1.4

firmware version 3.5.0 refer to the protocol v2.0, as the set up procedure changed, the tool can not be used for the device with firmware 3.5.0. In 3.5.0, the device can be set as a AP and accessed with URL of http://10.10.7.1/

AP access point:

SSID: ITEAD-xxxxxxx
Password: 12345678

Rest API:

  • Set devices ON and OFF

  • Set the "Power On State" of the devices

  • Set inching state and inching time of the devices

  • Modify the LAN info (SSID and Password) of the device

  • Flash the firmware via OTA

  • Get the device info

Directory Information

  • /code
  • /tool
  • /other

/code:Sonoff Devices DIY Tools source code

(Clone the file in this folder and revise what you want)

/tool:Source code compiled exe. file

(You can download and run the exe. file in this folder, win10 is recommended )

/other:Sonoff Devices DIY Tools related documentations

(Documentations related with Sonoff DIY Mode API protocol and others)

Welcome Issues