Skip to content

Control4 2way web driver - Used by Home Bridge Control4 Plugin (homebridge-c4-plugin)

License

Notifications You must be signed in to change notification settings

itsfrosty/control4-2way-web-driver

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 

Repository files navigation

control4-2way-web-driver

This driver allows you to get and set the state of any control4 device by making an http request. The response is in JSON format.

Use Case:

I am using this (along with my homebridge-c4-plugin) to connect homekit to my control4. So I can say "Siri turn on Kitchen Lights" or "Siri is my garage door closed". You can use this with any other hub which supports making http requests.

Examples:

  • Get the current level of dimmer light: http://CONTROLLER_IP:9000/?command=get&proxyID=25&variableID=1001

Result: {"1001":"75"} which means the dimmer light with proxyID 25 is currently at 75%

  • Update the current level of dimmer light: http://CONTROLLER_IP:9000/?command=set&proxyID=25&variableID=1001&newValue=100

Result: {"success":"true"}

  • Get the current temperature set for thermostat: http://CONTROLLER_IP:9000/?command=get&proxyID=34&variableID=1132,1130

Result: {"1132":"68","1130":"67","success":"true"} which means the thermostat is set to 68F and current temperature is 67F

  • Update the temperature of thermostat: http://CONTROLLER_IP:9000/?command=set&proxyID=34&variableID=1132&newValue=66

Result: {"success":"true"}

  • Get list of all variables for a device: http://CONTROLLER_IP:9000/?command=getvariables&proxyID=25

Result: {"1005":"MAX_ON_LEVEL","1006":"MIN_ON_LEVEL","1003":"CLICK_RAMP_RATE_DOWN","1007":"START_ON_LEVEL","1000":"LIGHT_STATE","1004":"PRESET_LEVEL","1008":"START_ON_TIME_MS","1001":"LIGHT_LEVEL","1002":"CLICK_RAMP_RATE_UP","success":"true"}

How to use:

Sorry this is not currently easy to use :(. You will have to find the variableID and proxyID for each device you want to connect. I hope in future we can make it use device names and variable names instead of IDs.

  • You need to either have access to ComposerPro or ask your dealer to install it for you.
  • To find proxyID, mouse over the device or check info for the device.
  • To find variableID, execute: for k,v in pairs(C4:GetDeviceVariables(34)) do print(k, v.name, v.value) end which will print all variables, their IDs and current values.

Warning:

This is completely unencrypted and unsecure. Anybody with access to your wifi will be able to control any of your control4 connected devices. So don't open it to internet and also make sure you have a secured wifi.

About

Control4 2way web driver - Used by Home Bridge Control4 Plugin (homebridge-c4-plugin)

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published