Replies: 16 comments 25 replies
-
|
Hi Ivo, I will test the app on my GW-B5600 and my GBD-H1000 and come back to you. |
Beta Was this translation helpful? Give feedback.
-
|
I am not sure I understand. The connection is initiated from the watch, so when you press the button on the watch, this is the watch that is going to connect. So you would know which watch is connected. Are you sayng you are pressing the buttons on both watches at the same time? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, I was wodeing if connection either watch had the app stuck at the first screen, or does this happen for the GBD only? |
Beta Was this translation helpful? Give feedback.
-
|
I think that GBD connected first without me pressing any buttons. I was trying to connect GW, so I pressed that button and it showed as connected but the app was showing GBD as the connected one. |
Beta Was this translation helpful? Give feedback.
-
|
OK, maybe the GBD was running auto-sync. |
Beta Was this translation helpful? Give feedback.
-
|
Also regarding GBD battery indicator. I don’t think battery is available on the official app. There is a battery indicator on the watch itself. So don’t worry about this functionality. Also as far as I know there is no reminder functionality. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
version 12.1 |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I've been using the app with 2 Edifice ECB-S100 (insane value watch btw ;) ) and apart from the reminders which the watch doesn't support, it seems to work flawlessly. Settings, alarms, timer, time sync, battery info... Very cool! And faster than the edifice app as well. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the info. I'll remove reminders from the app for that watch, and
will add it to the supported list.
Ivo
…On Thu, Mar 14, 2024, 1:04 AM gpregger ***@***.***> wrote:
Hi, I've been using the app with 2 Edifice ECB-S100 (insane value watch
btw ;) ) and apart from the reminders which the watch doesn't support, it
seems to work flawlessly. Settings, alarms, timer, time sync, battery
info... Very cool! And faster than the edifice app as well.
Only thing I can think of to possibly improve is to allow both watches to
stay paired to the app, but no big deal. (Currently I have to "forget" one
watch to communicate with the other).
—
Reply to this email directly, view it on GitHub
<#22 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37RD6CGFMHB4WJFJBMTYYDSPXAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DONZZG44TS>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks again for your feedback. Do you think you can add the time screen
screenshot for the ECB-S100 to this discussion? I like to see how the exact
name of the watch appears.
Regards,
Ivo
…On Thu, Mar 14, 2024, 5:31 AM Ivo Zivkov ***@***.***> wrote:
Thanks for the info. I'll remove reminders from the app for that watch,
and will add it to the supported list.
Ivo
On Thu, Mar 14, 2024, 1:04 AM gpregger ***@***.***> wrote:
> Hi, I've been using the app with 2 Edifice ECB-S100 (insane value watch
> btw ;) ) and apart from the reminders which the watch doesn't support, it
> seems to work flawlessly. Settings, alarms, timer, time sync, battery
> info... Very cool! And faster than the edifice app as well.
> Only thing I can think of to possibly improve is to allow both watches to
> stay paired to the app, but no big deal. (Currently I have to "forget" one
> watch to communicate with the other).
>
> —
> Reply to this email directly, view it on GitHub
> <#22 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AA7M37RD6CGFMHB4WJFJBMTYYDSPXAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DONZZG44TS>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***
> .com>
>
|
Beta Was this translation helpful? Give feedback.
-
|
Sure thing:
|
Beta Was this translation helpful? Give feedback.
-
|
👍
…On Thu, Mar 14, 2024, 3:15 PM gpregger ***@***.***> wrote:
Sure thing:
IMG_20240314_150449.jpg (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/13817022/af74f31d-9ede-48cb-9e4b-b918790f5e8e>
—
Reply to this email directly, view it on GitHub
<#22 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37T6F3RBYCWAUOYH743YYGWH3AVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DOOBWHE3TO>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Hello ! I'm using your app -- which is by far better and less intrusive than the Casio one-- with a recently acquired ECB-30D (the blue one) |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for reporting, and a great looking watch!
From the screenshot you sent me, looks like a few things are not working
/ compatible. There is no "Home Time", the battery reads wrong, and there
is no temperature reading. Do these appear on the official app? Also, does
your watch support reminders? I'll look into it's manual shortly.
Of course I like to add all functions for that watch, bit I do not have one
to try. Let us hope someone with this watch can add full functionality.
BTW, what version of the app are you using? Should be 13. You can see the
version by pressing on the (i) icon on the top -right of the initial screen
…On Wed, Jun 5, 2024, 1:20 PM Ji-eF ***@***.***> wrote:
Hello ! I'm using your app -- which is by far better and less intrusive
than the Casio one-- with a recently acquired ECB-30D (the blue one)
image.png (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/29019393/35c86946-b3c1-4018-9053-70c5c3d7706e>
The app works great for almost everything :) -- Alarm and Chime , Timer ,
Time and various settings
However, some things do not work, but not sure how to report them, as I do
not have the right knowledge to provide logs.
Aside from that, I'm really happy with this app ! Thanks for your work !
—
Reply to this email directly, view it on GitHub
<#22 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37XF745IAKL7ASOT4M3ZF5CETAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TMOBQG42TI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks for replying fast ! Yes I use v13 and the app correctly detects "ECB-30" besides the "Forget" button ! I'll re-test the missing settings from the official Casio app later, because as of now, I completely remove it as it was very intrusive (mandatory Casio account and GPS location) The watch (module 5686, btw) supports reminders but Casio app did not let me test it (because I use Davx5 instead of a "real" Google account). I also pinned down a strange bug : If I enable "Time adjustment" from app settings, and "Send to watch", from then, the watch does not ring anymore (neither alarm, nor chime, nor timer). The only working beep working is the button operation tone. To get the watch to a running state again, I have to reset the watch to its factory settings. I'll come back later with results from the official casio app... Thanks again for your work ! |
Beta Was this translation helpful? Give feedback.
-
|
Ok, no problem. I'll check the manual. No need to test. I'll get back to
you later.
…On Wed, Jun 5, 2024, 2:42 PM Ji-eF ***@***.***> wrote:
Thanks for replying fast ! Yes I use v13 and the app correctly detects
"ECB-30" besides the "Forget" button !
I'll re-test the missing settings from the official Casio app later,
because as of now, I completely remove it as it was very intrusive
(mandatory Casio account and GPS location)
The watch (module 5686, btw) supports reminders but Casio app did not let
me test it (because I use Davx5 instead of a "real" Google account).
Your app, however, displays my calendar events 👍 , but does not seem to
send them to the watch...
I also pinned down a strange bug : If I enable "Time adjustment" from app
settings, and "Send to watch", from then, the watch does not ring anymore
(neither alarm, nor chime, nor timer). The only working beep working is the
button operation tone. To get the watch to a running state again, I have to
reset the watch to its factory settings.
I'll come back later with results from the official casio app...
Thanks again for your work !
—
Reply to this email directly, view it on GitHub
<#22 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37Q5FISLS76QSXXPD3DZF5L2HAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TMOBRGQ3DM>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Well I did test the official Casio Watch again. The settings are quite a pain to use (slooooow), but I did not see any temperature nor battery display (it's not a "tough solar" casio btw) |
Beta Was this translation helpful? Give feedback.
-
|
- OK, so it seems like there are no reminders.
- Should have World Time, so you should be able to see the home time at the
bottom-left. Should day "Paris"
- Also, the name of the watch should be displayed in the center of the
screen: CASIO ECB-300D. Have you ever seen this?
- Have you seen the battery level something different than empty?
- What about functions like Phone Finder? Does that work?
Otherwise, you are not missing anything that the watch provides.
Regards,
Ivo
…On Wed, Jun 5, 2024 at 3:46 PM Ji-eF ***@***.***> wrote:
Well I did test the official Casio Watch again. The settings are quite a
pain to use (slooooow), but I did not see any temperature nor battery
display (it's not a "tough solar" casio btw)
While I'm at it, I took a few screenshots to post below :
Screenshot_20240605-213650_CASIO.WATCHES.jpg (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/29019393/2f7b16d0-d546-4a98-852a-89798ce7feb2>
Screenshot_20240605-213812_CASIO.WATCHES.jpg (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/29019393/910afa25-c91a-42a9-9f98-ef5899f17c1d>
Screenshot_20240605-213634_CASIO.WATCHES.jpg (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/29019393/4bc42744-f62f-4041-8bd4-3266371f8ff3>
—
Reply to this email directly, view it on GitHub
<#22 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37WTQDEOT4JRHGKQ66DZF5TH7AVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TMOBRHEYTQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Hometown , watch name and not-empty battery : Nope. Did not ever see any of those so far. |
Beta Was this translation helpful? Give feedback.
-
|
About running actions, I think this can be done the same as "Triggering Immediate Time Adjustment" on your watch. See this section here. (Pressing the D button for at least 2 seconds will trigger the selected action). Let me know if this works for you. I'm surprised that the watch's name does not show on the Time screen. It is obtained the same way as the name in the bottom-left of the initial screen. For the auto-time sync, the watch should initiate the connection. You can observe this as the number of minutes after the hours of 12 AM, 6 AM, 12 PM, and 6 PM. This value can be seen on the "Settings" screen:
So in this case, 12:25 PM for example. See if the watch attempts to connect during that minute, usually around 12:25:30. |
Beta Was this translation helpful? Give feedback.
-
|
Presssing D for 2+ seconds seems to initiate a "new device" connexion (Flashing "CNCT" on the watch screen) . From this state, your app won't connect unless I press the "Forget" button. I'd be very happy to lend you my watch if you're open to this proposition. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, I just saw this in the manual. Basically, should be the same way as you
would force the watch to set it's time from the phone.
It would be great if I can borrow your watch or about a month. I will see
if I can get some of the other issues resolved, like home time, battery
level, etc. Send me a private message email at ***@***.***, and I
will give you my address. I'll pay for the return mail. I appreciate it.
Ivo
…On Sat, Jun 8, 2024, 5:00 AM Ji-eF ***@***.***> wrote:
Presssing D for 2+ seconds seems to initiate a "new device" connexion
(Flashing "CNCT" on the watch screen) . From this state, your app won't
connect unless I press the "Forget" button.
I'd be very happy to lend you my watch if you're open to this proposition.
—
Reply to this email directly, view it on GitHub
<#22 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37XUJSCUJ4SKQSXNLPDZGLB27AVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TOMJRHE2TI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Sent you a message at your mail from your github front-page as I do not see your e-mail from above here : |
Beta Was this translation helpful? Give feedback.
-
|
OK, it is ***@***.***
Thanks.
Ivo
…On Sat, Jun 8, 2024 at 9:46 AM Ji-eF ***@***.***> wrote:
Sent you a mail at your mail from your github front-page as I do not see
your e-mail from above here :
image.png (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/29019393/b5ec5d47-2484-43b4-a348-00fdce027526>
Please check your spam, as my messages tend to drop there..
—
Reply to this email directly, view it on GitHub
<#22 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37QXU6EI2KRCTTVPQXDZGMDKPAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TOMJTG44DE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Nope, did not see anything again ¬_¬, Please look at your gmail izivkov account ! |
Beta Was this translation helpful? Give feedback.
-
|
Ok, sorry about that. They make it difficult to post an email address.
My email address is the first letter of my first name followed by my last
name at gmail dot com. So "izivkov" at gmail dot com
You can also find in the app, if you go to Actions and then click on the
(i) icon next to "Set Prayar Alarm" action
Ivo Zivkov
…On Sat, Jun 8, 2024 at 11:22 AM Ji-eF ***@***.***> wrote:
image.png (view on web)
<https://github.com/izivkov/CasioGShockSmartSync/assets/29019393/d0c7dbd3-e202-4c8f-b35e-1414c4e6bbf1>
Nope, did not see anything again ¬_¬, Please look at your gmail izivkov
account !
—
Reply to this email directly, view it on GitHub
<#22 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37V2DSOLD53KBGCL7HDZGMORVAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TOMJUGUZTI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes ! , I sent you a mail ! |
Beta Was this translation helpful? Give feedback.
-
|
GA-B2100. Works 100%. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for testing!
…On Thu, Jul 18, 2024, 7:15 AM Hallvor ***@***.***> wrote:
GA-B2100. Works 100%.
—
Reply to this email directly, view it on GitHub
<#22 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA7M37QY5CIVASNY6SOYGJTZM6PTXAVCNFSM6AAAAAAT6FOP7OVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMBYGM2DMOA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
.com>
|
Beta Was this translation helpful? Give feedback.
-
Can we get some feedback on that watches are working and what are not working?
Has anybody running this app on the GW-B5000 watches? I have not tested extensively on this watch. I am using GW-B5600 for development.
Please add your comments on your experience with other watched.
Thanks you,
Ivo Zivkov
6 votes ·
Beta Was this translation helpful? Give feedback.
All reactions