Ctrlr-based Editor for the AMT-8 midi interface - communicates using over midi using sysex commands.
This panel was made to edit the 32 standalone patches of the Emagic AMT8 midi-interface. These patches are stored inside the unit and are active whenever the interface is not running off a computer.
The panel reflects the state of the selected preset, and features an “initialise” button, routing all inputs to all outputs except its own’s.
The labels displaying the port names can be edited to reflect your setup, so that instead of in/out 1… in/out 8 you can make them display the names of the devices connected to those ports. Just double-click on the name label and name it as you wish.
Currently only the routing matrix + routing initialise per preset is implemented – i still have to decode the filtering matrix messages, i will add those once i figure it out. All edits are instantly saved to the unit.
Setup:
Select AMT0(all) as midi-output device, input can be any of the 8 ports but one has to be selected for the updating of the panel to work.
ps: I was not able to test this panel on the Unitor because i do not own one, but the messages should be the same as they share the same driver/editing software. The only difference in these models is more capabilities in the Unitor, so i am 99% sure this will work for that device aswell. Should you decide to try this out with a Unitor please let me know how it went (and make a dump of your settings before tinkering)
Big thank you to Roman Kubiak, the developer of the awesome, open-source and cross-platform Ctrlr software! http://ctrlr.org/ for more info