Enable Reverse Camera

canbus.com.au

How to activate with Forscan

Hardware Required:

mkI Fg Falcon with colour tft screen, **fitted with reverse camera + wiring harness **to FDIM plug underneath ICC Top Hat.
OBD Adapter with MS-Can support
Laptop

Software Required:

Forscan with Extended License

Take a back up of your As Built Data.

It is always a good idea to take a backup of your vehicles data before modifying any configurations. This can be done in Forscan via the Module Configuration section.

Select the Module to be Backed Up, ie Front Display Interface Module(AS BUILT)
Flick over to ms-can on your switch when prompted.
Select Save & Save the .abt file
Select the Stop Icon to exit the configuration

Enable the Camera

The Reverse Camera Feature can be activated in the Module Configuration.

In Forscan under Module Configuration, Select the Module Standard Configuration, NOT the As Built Mode. Flick the ms-can switch when prompted.
Select the option for Reverse Camera and set it to Equipped
Cycle the Ignition if instructed to do so
Select the Stop Icon to exit the configuration
Test