Skip to content

jalw0tpyrc/tmkms-light

 
 

Repository files navigation

Tendermint KMS Light 🔐

TEE-based Key Management System for Tendermint validators.

About

This repository contains tmkms-light, a key management service intended to be deployed in conjunction with Tendermint applications (ideally on separate physical hosts). The code is based on the tmkms repository with the following differences:

  • Smaller codebase with the following limitations:
  1. only one network can be configured in each tmkms-light process;
  2. only the latest Tendermint protocol (v0.34) is supported;
  3. there is no support for HSMs;
  4. there is no support for transaction signing (tx-signer feature);
  5. only x86_64 Linux is supported.
  • The code does not use conditional compilation (each signing provider has separate binaries) and dependencies on abscissa crates were replaced in order to fully support tracing for the application logging.
  • Signing in TEE (Trusted Execution Environments): currently, Intel(R) SGX and AWS Nitro Enclaves are supported.

Status

Tendermint KMS Light is currently beta quality. In the future, the work developed in this repository may be upstreamed to the original tmkms repository.

Signing Providers

The following signing backend providers are presently supported:

Software-Only (not recommended; only for testing)

This is contained in the "providers/softsign" directory.

Intel(R) SGX

This is contained in the "providers/sgx" directory. There are two crates that need to be compiled separately:

  • tmkms-light-sgx-app: this is the enclave application that needs to be compiled for the x86_64-fortanix-unknown-sgx target, converted and signed as per EDP instructions;
  • tmkms-light-sgx-runner: this is the (host) runner application that is used to load the enclave application and interface with the host system.

Installation

First, Setup your sgx machine with EDP Installation guide

Build tmkms-light-sgx-runner

cargo build --target x86_64-unknown-linux-gnu -p tmkms-light-sgx-runner --release
Reproducible SGX enclave application building

Build tmkms-light-sgx-app

docker build -f Dockerfile.sgx --target export --output type=local,dest=./ .

The output enclave file is tmkms-light-sgx-app.sgxs. You can then follow EDP instructions for SGXS signing.

⚠️ For SGXS signing, the EDP instructions are shown for the "Debug" mode. For the production mode, remove the --debug / -d flags.

⚠️ For CPUs without the Flexible Launch Control feature (i.e. SGX v1), the enclave code needs to be signed with the RSA key previously approved by Intel in order to launch in the production mode.

Manual SGX enclave application building

Build tmkms-light-sgx-app

cargo build --target x86_64-fortanix-unknown-sgx -p tmkms-light-sgx-app --release

Follow EDP instructions for SGXS conversion and signing.

⚠️ For SGXS conversion, change --heap-size/--stack-size value to 0x40000, and --threads 2 should be enough.

⚠️ For SGXS conversion and signing, the EDP instructions are shown for the "Debug" mode. For the production mode, remove the --debug / -d flags.

⚠️ For CPUs without the Flexible Launch Control feature (i.e. SGX v1), the enclave code needs to be signed with the RSA key previously approved by Intel in order to launch in the production mode.

Configuration

  • Place the generated *.sgxs and *.sig files into tmkms/enclave directory.
  • Place the tmkms-light-sgx-runner binary to tmkms directory.

tmkms init

Provide your chain bech32_prefix

$ tmkms-light-sgx-runner init -b bech32_prefix -p "bech32"

⚠️ For those who are running on Azure or other cloud environments, one may want to run init command with a cloud backup key. In cloud environments such as Azure, CPU-affinity may not be guaranteed, so SGX “sealing” (a way to encrypt the validator key that only a particular CPU can decrypt the validator key) may not be fully relied on. Please follow With cloud backup key if you intend to deploy in those settings.

With cloud backup key

TODO: these instructions are to be enhanced later on. One may provide flag -e backup_key_path which is to encrypt and decrypt consensus-key.backup in directory specified in -k backup_data_path. Before init, you will need to run tmkms-light-sgx-runner cloud-wrap -s wrap_key_path -d

Recover

$ tmkms-light-sgx-runner recover -b bech32_prefix -p "bech32" -e backup_key_path -k backup_data_path -r

Or follow the example python script to run recover

Lastly, edit the generated tmkms.toml to fit the target chain config, i.e chain_id and enclave_path

Running

tmkms start

tmkms-light-sgx-runner start

AWS Nitro Enclaves

This is contained in the "providers/nitro" directory. There are two crates that need to be compiled separately:

  • tmkms-nitro-enclave: this is the enclave application that needs to be compiled for the x86_64-unknown-linux-musl target if you are using the Alpine Linux (or equivalent) for the Docker file that gets converted to the enclave image file. The enclave application also needs to be linked against AWS Nitro Enclaves SDK etc., so make sure these libraries are present in your build environment -- see this AWS Dockerfile.
  • tmkms-nitro-helper: this is the application on the host that pushes the configuration to the enclave and provides extra vsock proxy connections to interface with the host system.

Installation

1. Set up AWS nitro enclaves

Follow the step 1 and step 4 here

2. build tmkms-nitro-enclave and tmkms-nitro-helper
2.1. build docker image in which build the tmkms-nitro-enclave
$ cd tmkms-light
$ docker build -t aws-ne-build \
       --build-arg USER=$(whoami) \
       --build-arg USER_ID=$(id -u) \
       --build-arg GROUP_ID=$(id -g) \
       --build-arg RUST_TOOLCHAIN="1.56.1" \
       --build-arg CTR_HOME="$CTR_HOME" \
       -f Dockerfile.nitro .

#####2.2. build tmkms-nitro-helper

$ cd tmkms-light
$ cargo build --target x86_64-unknown-linux-gnu -p tmkms-nitro-helper --release

After build process finished, move the binary tmkms-nitro-helper to one of your PATH directories.

#####2.3. create eli file

Use the docker image aws-ne-build which built in step 2.1 or just pull the docker image from dockerhub by using docker pull cryptocom/nitro-enclave-tmkms:latest

$ mkdir ~/.tmkms
$ nitro-cli build-enclave \
  --docker-uri aws-ne-build \
  --output-file ~/.tmkms/tmkms.eif

Configuration

First, you need to start nitro enclave and generate the encrypted validator key and config files:

$ tmkms-nitro-helper enclave run --cpu-count 2

In another shell, you can check the enclave status:

$ tmkms-nitro-helper enclave info

the output should be:

[
  {
    "EnclaveID": "i-xxx-xxx",
    "ProcessID": 31388,
    "EnclaveCID": 1,
    "NumberOfCPUs": 2,
    "CPUIDs": [
      1,
      3
    ],
    "MemoryMiB": 512,
    "State": "RUNNING",
    "Flags": "NONE"
  }
]

create the encrypted validator key and config files:

$ mkdir ~/.tmkms && cd ~/.tmkms
$ tmkms-nitro-helper init \
    -a $KMS_REGIN \
    -k $KMS_KEY_ID \
    -p bech32 \
    -b crocnclconspub \
    --cid $EnclaveCID

where:

  • KMS_REGIN: where your AWS ec2 located like ap-southeast-1, see more here
  • KMS_KEY_ID: AWS Key Management Service key id
  • EnclaveCID: can get from command tmkms-nitro-helper enclave info

It should encrypted validator signing key secrets/secret.key, tmkms config file tmkms.toml and enclave config file enclave.toml, the output looks like:

public key: crocnclconspub1zcjduep..........tq48jchd
Nitro Enclave attestation:
hEShATgioFkRZKlpb.......................3L2Z28yKrDMTR

Running

Running step by step

You need to start three components to make it work:

  1. start nitro enclave:
$ tmkms-nitro-helper enclave run --cpu-count 2 -v
  1. start vsock proxy:
$ tmkms-nitro-helper enclave vsock-proxy --remote-addr kms.ap-southeast-1.amazonaws.com

do remember to change the value of remote-addr associated with your AWS region.

  1. start tmkms helper:
$ tmkms-nitro-helper start -c ./tmkms.toml -v

You can use -h or --help to see more options to start the three components

Running all in one

There is a handy command to start all the three components all in one:

$ cd ~/.tmkms
$ tmkms-nitro-helper launch-all -v

About

TEE-based Key Management System for Tendermint validators.

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Rust 90.7%
  • Python 5.5%
  • Nix 3.3%
  • Other 0.5%