You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I installed two ZB4001 switches recently. I noticed that there is a half-second delay from when the rocker is pressed to when the light turns on. There is no such delay if I turn the switch on/off from the hub.
I understand that some smart switches purposely add this delay in order to detect single/double/triple taps, or press-and-hold input, but this switch doesn't support any of those features, so why is there still a delay when toggling the switch physically?
Is there any way to configure that via a Zigbee hub?
How To Reproduce
Mount GE Zigbee Smart Switch In-Wall in place of an existing switch.
Press and release the top of the rocker.
Result:
It takes exactly 500ms from pressing the switch to the light turning on.
Expected:
Ideally there should be almost no delay.
The text was updated successfully, but these errors were encountered:
Thanks for reaching out. You are correct that switches will need this for single/double/triple taps. Ultimately its added for any multiple button press function. All of our Zigbee devices can adjust the LED light on the front panel by pressing 3 up 1 down quickly.
What brand is the bug report for?
Enbrighten-GE
ZW Number
ZB4001
Product Number
45856GE
FW Version
original
Bug Report Details
I installed two ZB4001 switches recently. I noticed that there is a half-second delay from when the rocker is pressed to when the light turns on. There is no such delay if I turn the switch on/off from the hub.
I understand that some smart switches purposely add this delay in order to detect single/double/triple taps, or press-and-hold input, but this switch doesn't support any of those features, so why is there still a delay when toggling the switch physically?
Is there any way to configure that via a Zigbee hub?
How To Reproduce
Result:
It takes exactly 500ms from pressing the switch to the light turning on.
Expected:
Ideally there should be almost no delay.
The text was updated successfully, but these errors were encountered: