Does your lock work? Let me know and I can update the readme.

[jbergler]

If you try the extension out I'd love to gather a bit of data around the different locks people are using.
Please comment with the 'model' from the home assistant device, and the actual brand/model of the lock you're using.

eg. E-Lok 9 Series reports itself as "SN9206_PV53" with firmware "6.0.6.210622"

[Jayva2002]

Thanks for this.
This lock works: https://www.amazon.com/gp/aw/d/B09B557YZK
Cielsa Dawn Fingerprint Digital Doorknob
model: SN279_PV53
Firmware: 5.3.3.210601
Couple of bugs: integration reports error “KeyError: 'modelNum'” on load.
and during setup the username and password fields do not show any labels - you have to guess what the integration is wanting.
I can’t thank you enough for this!

[cordvision]

Lock sold as:
Brand: YRHAND
Model: DQ
In TTLock App: Lock Number: RXDQ_39883c
In Home Assistant integration under device info: SN417-T2_PV53

I'm using the G2 Gateway

I can unlock it through home assistant (works almost instantly with only a 1-2 second delay).
However, I do not get a status (which would be very useful because I could automatically turn on the lights as soon as somebody unlocks the door).
Not sure if I don't see the status/history because I couldn't completely follow the installation instructions: I got stuck on the last two step. (Once the integration is working, go to System > Logs and find the ttlock webhook url
Go back to the url from the first step and set the 'Callback URL' for your application). I couldn't find the webhook url in any of the logs (might have been looking in the wrong place).

[jbergler]

Thanks @cordvision, hopefully this is resolved in #14, but let me know in that ticket if you still have issues.

[Key1909]

Thanks for this, integration.
This lock works: https://aliexpress.ru/item/4000975407287.html?spm=a2g2w.orderdetail.0.0.37ae4aa6xModCc&sku_id=12000032034343065
model: SN9286_PV53
Firmware: 6.5.07.220721
The lock opens, shows the battery level, updates the status of the position.
After using it during the day, I noticed that the state does not change from open to closed.

[stevearmitage]

Installs very easily with the information i have from the other integrations

Brand : TOTOWISER
Title: Fingerprint Door Lock,Keyless Entry Door Lock with Handle,Smart Door Lock,Biometric Smart Door Knob for Home Apartments Office Hotel Bedroom,Black
Page: https://www.amazon.com.au/gp/product/B08TQKW3JC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Model: SN275-5S-250MS-6V_PV53
Firmware: 6.4.11.220206

I only get the unlock button. Would like current state and battery percentage if possible.
It takes about 5-10 seconds to action the unlock request, which is ok.

[ibreez]

works flawlessly with a OEM TTlock .. you awesome @jbergler 👍

[markjsmith]

If you try the extension out I'd love to gather a bit of data around the different locks people are using. Please comment with the 'model' from the home assistant device, and the actual brand/model of the lock you're using.

eg. E-Lok 9 Series reports itself as "SN9206_PV53" with firmware "6.0.6.210622"

Works with my Simpled SF series slim lock and the lock was very easy to fit to my multi lock point door.
Really pleased!

[tammeryousef1006]

honestly you deserve much more than a coffee , many thanks from the heart bro

[tammeryousef1006]

SN303-3801_PV53
, firmware 6.0.3.210408
works great

[jfencl]

Worked perfectly for me!
Kucacci Fingerprint Smart Door Lock
H15B-B

[luisgarcia87]

Brand: RAYKUBE
Link: Aliexpress RAYKUBE
SN9284-T0_PV53
by TT Lock
Firmware: 6.4.11.220206
Hardware: 1.2

Works good!
Unlock - Lock command takes less than 5 seconds to respond.
Reports battery status correctly
2 sensors (Last Operator and Last Trigger) shows up as Unknown on HA
Door does not report state, nor does it reflects if the door's been unlocked/locked via the app or finger, card, code etc)

[mabrochu-helpox]

Brand: hornbill
Model: N/A
In TTLock App: Lock Number: M203T_06e39b
In Home Assistant integration under device info: SN138-D-T2-1S-GT312-T20-YD_PV53

I'm using the G2 Gateway

Works in home-assistant. The delay is 7-8 seconds but once awake it's faster 2-3 seconds
Last Operator and Last Trigger not working

[Jaap-i-o]

Works with my https://smartklink.nl lock type Smart One with hub, based on TT lock and the lock installed with mechanical auto closing multipoint lock.

[gharl77]

Hi! I don't know, if it's the right page to ask you this question, but i'm unable to logged in when I want to add my lock.

I'm getting this error: "invalid client_id", but it's the same username/password if I go on TTLock Cloud website: https://lock.ttlock.com/. What I'm doing wrong? Can you help me please? Thanks.

[Dozer302]

EDIT: In the app I had not enabled "REMOTE UNLOCK" - lock now locking and unlocking remotely.

Manufacturer: Simpled.uk
Model: HF
Gateway via AliExpress - works fine in the app for all controls.

Lock details:
SN9206-01_PV53
by TT Lock
Firmware: 6.0.7.210706
Hardware: 1.6

Reports the following entities:

[jbergler]

Thanks everyone for the reports.

@mabrochu-helpox and @luisgarcia87
Can you double check that you've setup the webhook correctly, and if you're still not seeing the "Last Operator" and "Last Trigger" sensors updating please open an issue with some logs.

@gharl77
You need to create an OAuth App per the instructions. If you've followed those steps, please create a new issue and provide some screenshots of what you're entering into the setup forms

[cloudbr34k84]

Working great with Hitenso X1 smart lock

SN9254-T12-INT-ALARM_PV53 Firmware: 6.4.11.220505 Hardware: 1.1.1

Thanks!

Are using that ttlock hub?

[scrampker]

Working great with Hitenso X1 smart lock

SN9254-T12-INT-ALARM_PV53 Firmware: 6.4.11.220505 Hardware: 1.1.1

Thanks!

You can manage/modify codes, fingerprints, lock/unlock, and trigger based on manual unlock, all within hass and not the lock's app?

[cloudbr34k84]

I'm noticing that a lot of people are vaguely saying that their locks work fine, but I don't see a single screenshot of people having the field/entities to modify lock code. Hmmm.

Lock/unlock work, and battery shows, but no way to modify/create codes, and no status when the lock is manually unlocked. IE, I can't see which user unlocked either.

Here's mine. Way overpriced/repackaged aliexpress sliding door lock from 'US' vendor.

You can buy that lock so much cheaper in AliExpress directly

[scrampker]

I'm noticing that a lot of people are vaguely saying that their locks work fine, but I don't see a single screenshot of people having the field/entities to modify lock code. Hmmm.
Lock/unlock work, and battery shows, but no way to modify/create codes, and no status when the lock is manually unlocked. IE, I can't see which user unlocked either.
Here's mine. Way overpriced/repackaged aliexpress sliding door lock from 'US' vendor.

You can buy that lock so much cheaper in AliExpress directly

Agree. The seller is a scam artist. The only benefit I received is that they actually provided a bunch of info about their locks. They knew what apps, controllers, and physical applications they are good for.

That being said, they legit just ordered from aliexpress and had it drop-shipped to my house. I thought at least they'd have their own inventory. Took forever to get my lock. DO NOT buy from them. If anything, I recommend wasting their time asking questions, then find the lock on ali. Screw those guys.

[andezer]

Working great with Hitenso X1 smart lock

SN9254-T12-INT-ALARM_PV53 Firmware: 6.4.11.220505 Hardware: 1.1.1
Thanks!

Are using that ttlock hub?

Yes

[andezer]

Working great with Hitenso X1 smart lock

SN9254-T12-INT-ALARM_PV53 Firmware: 6.4.11.220505 Hardware: 1.1.1
Thanks!

You can manage/modify codes, fingerprints, lock/unlock, and trigger based on manual unlock, all within hass and not the lock's app?

No, but I don't need that. I just need the ability to open the door by pressing a remote physical button or voice command. This integration allows me to do that.

[scrampker]

Working great with Hitenso X1 smart lock

SN9254-T12-INT-ALARM_PV53 Firmware: 6.4.11.220505 Hardware: 1.1.1
Thanks!

You can manage/modify codes, fingerprints, lock/unlock, and trigger based on manual unlock, all within hass and not the lock's app?

No, but I don't need that. I just need the ability to open the door by pressing a remote physical button or voice command. This integration allows me to do that.

It's fine, I just think that it warrants a bit of clarification when people say that a particular lock works perfectly, but really only works with one of maybe six or seven features. Perhaps some sort of matrix needs to be created.

[cemilbrowne]

This lock works beautifully: https://smartdoorlocks.com.au/products/sdl-ss1-smart-super-slim-5-in-1-lever-handle-35mm-wide

SDL-SS1

Australia specific, as does:

https://smartdoorlocks.com.au/products/sdl-s1-smart-slim-5-in-1-lever-handle-bluetooth-wifi

SDL-S1

Make sure you enable remote unlock! I think it's worth putting this on the home page when you install.

[eXcalibre]

Thanks for the integration Confirmed working well.
Ruveno Slim Smart Fingerprint Door Lock

[lsellens]

Working ok with euerte brand locks using a hornbill wifi gateway.
https://www.euerte.com/fingerprint-door-knob-s08y/

[LanceMcCarthy]

This Tiffane level lock works perfectly for me.

Model Number: ? - I couldn't find it, but here's the amazon link
ASIN: B08DKC6GZJ
Firmware: v5.0.1.200721

Important

In order to remotely control locks without Wi-Fi, you will need a gateway. Once connected to the gateway, the TTLock app will show you a new feature to enable "Remote Lock". This is the gateway I've been using.

[kl4ver]

Works with this one: https://flient.nl/product/flient-smart-lock-advanced-zwart-slim-slot-gratis-verzendig/

[jenniferlee1818]

SN471_PV53 Firmware: 6.4.14.220630

Received my G2 Gateway today and my Smart Doorknob Fingerprint Door Lock now works in Home Assistant wahoo!

Very happy with the integration. Thank you so much!

[scrampker]

SN471_PV53 Firmware: 6.4.14.220630

Received my G2 Gateway today and my Smart Doorknob Fingerprint Door Lock now works in Home Assistant wahoo!

Very happy with the integration. Thank you so much!

Jennifer, can you confirm that the Last Operator is properly updated? Is it just providing a text entry from the user you input using a proprietary app? I also assume you cannot set the codes using this integration?

Thanks for reporting your lock!

[jenniferlee1818]

Yes, the Last Operator updates with the name of the passcode used or the name of the fingerprint used. If I use Home Assistant or the TTLock app it shows the Last Operator is my TTLock app username (email address). Yes, I can successfully set codes with the integration :) Everything works as it should as far as I can tell. It would be better if setting codes did not require a start date and end date, but extremely happy with this integration regardless!

[scrampker]

If it shows your email, how does it differentiate between your family members? Do you need a separate email somehow for each person?

…

-------- Original Message --------

On Mar 13, 2024, 3:16 PM, Jennifer wrote: Yes, the Last Operator updates with the name of the passcode used or the name of the fingerprint used. If I use Home Assistant or the TTLock app it shows the Last Operator is my TTLock app username (email address). Yes, I can successfully set codes with the integration :) Everything works as it should as far as I can tell. It would be better if setting codes did not require a start date and end date, but extremely happy with this integration regardless! — Reply to this email directly, [view it on GitHub](#1 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/ADS37XE7OQF5CAK5J3PIWG3YYCQYFAVCNFSM6AAAAAAWP33QI6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJVGQ2TMMJZGM). You are receiving this because you commented.Message ID: ***@***.***>

[jenniferlee1818]

OK so you're right that for each home assistant user who uses home assistant to unlock the lock, it only shows my email address, it doesn't show which home assistant user did it. For me it's okay because I'm the only one who would ever use home assistant to unlock it. Others use their fingerprint or passcode and then Last Operator updates with the fingerprint name or passcode name.

[scrampker]

Okay that's perfect, so per user automations will work. Awesome!

…

-------- Original Message --------

On Mar 13, 2024, 3:35 PM, Jennifer wrote: OK so you're right that for each home assistant user who uses home assistant to unlock the lock, it only shows my email address, it doesn't show which home assistant user did it. For me it's okay because I'm the only one who would ever use home assistant to unlock it. Others use their fingerprint or passcode and then Last Operator updates with the fingerprint name or passcode name. — Reply to this email directly, [view it on GitHub](#1 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/ADS37XAZC2JP62YP5CHYXYTYYCTBVAVCNFSM6AAAAAAWP33QI6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJVGUYTONBVGQ). You are receiving this because you commented.Message ID: ***@***.***>

[evgeny-sureev]

Hello. This lock works: https://умныйзамок.рф/catalog/zamki/konanq5/

[kryanth]

Auslock ( https://ausmartlocks.com.au/ ) , specifically the slimline 38mm https://ausmartlocks.com.au/products/slim-smart-door-lock-series

Is a straight up ttlock and works as expected.

[scrampker]

Auslock ( https://ausmartlocks.com.au/ ) , specifically the slimline 38mm https://ausmartlocks.com.au/products/slim-smart-door-lock-series

Is a straight up ttlock and works as expected.

Man, this is very expensive for what look like Aliexpress locks. Same thing happened to me when I ordered from theconnectedshop.com. They just rebadge/resell things for 300% mark-up.

[kryanth]

Auslock ( https://ausmartlocks.com.au/ ) , specifically the slimline 38mm https://ausmartlocks.com.au/products/slim-smart-door-lock-series
Is a straight up ttlock and works as expected.

Man, this is very expensive for what look like Aliexpress locks. Same thing happened to me when I ordered from theconnectedshop.com. They just rebadge/resell things for 300% mark-up.

Yes, though it was included in a uPVC double glazed entry door , as it has the mortice lock and not a euro cylinder; it was marked down again within the door and install and uPVC double glazed entry doors in Australia aren't cheap to begin with, and for the lack of hassle in installation, was fine.

Works and is, as you say, a straight up rebadged ttlock

[ashtonaut]

Working with an E-Lok Series 8 (non-wifi model), reported in HA as a SN9246_PV53 Hardware 1.3 Firmware 6.4.20.221201
Using an Aliexpress ttlock bridge (Ethernet version).

[ntk9]

there is a way to update the Last Operator and Last Trigger even if the same person open the door ? i have notification send with the name of the person open the door but there is no change in the sensor (and the trigger ot working) when someone open the door twice or the same way

[hanseandersson]

Works great with
BG 4000 Nordic+
https://www.beslagsgruppen.se/product/bg4000

[heffe2001]

Veise RZ06 Touchscreen Lock reports as:
SN506-NO-FP-D_PV53 Firmware: 6.6.05.231113 Hardware: 1.2
Connected to a Veise G2

So far everything seems to work. I'll be adding several other Veise locks, I'll update with their results as I go..

[LMenor]

Lock says Smonet on the front.

Device info
SN274-M-T4-T32-02_PV53
by TT Lock
Firmware: 5.3.1.210326
Hardware: 1.7

Works great. I have 5 entities in Home Assistant:
Lock/unlock control
Battery level
Last Operator
Last Trigger
Passage Mode On/Off

Everything is working flawlessly so far. Thanks a bunch Coffees (Beer's) have been sent.

[buchvald]

Smart Lock BG2000

Device info
SN9206_PV53
by TT Lock
Firmware: 6.0.6.210622
Hardware: 1.6

So far everything seems to work

Thanks - nice work!

[rafoloru]

Works great with this one:

Here's the info:

• Brand: Hornbill (https://www.amazon.ca/dp/B0B93KYRGY?ref=ppx_yo2ov_dt_b_product_details&th=1)
• Info from Homeassistant:
  SN9274-YD-TO-539_PV53
  by TT Lock
  Firmware: 6.6.05.230903
  Hardware: 1.2
• I'm using G2 gateway

I have the status and history of the lock and I can lock/unlock the door.

Thanks

[Treshik]

Another lock (biometric reader) works:
Info:

• Brand: Dircode https://dircode.ru/dircode/sciener/dircodebio
• Info from HomeAssistant:
  SN9274-WS-BELL_PV53
  by TT Lock
  Firmware: 6.4.24.230625
  Hardware: 1.2
• G2 Smart lock gateway
  The reader is connected to the electric latches in the door, is it possible to somehow add a button to the Home Assistant (not a switch) to open the latches?