OpenStack Folsom Installation Bash Script for Ubuntu Server 12.04 or 12.10
In Japanese... https://github.com/jedipunkz/openstack_folsom_deploy/blob/master/README_jp.md
Tomokazu Hirai @jedipunkz
Twitter : https://twitter.com/jedipunkz Blog : http://jedipunkz.github.com
This script was tested ...
- all in one node with nova-network
- separated nodes (controller, compute x N) with nova-network
- all in one node with quantum
- separated nodes (controller, network, compute x N) with quantum
so, now I do not support separated nodes for each service (keystone, glance, nova, etc...). If you want to do this with separated nodes mode, please tell me or fork it. :D
devstack is very usefull for me. I am using devstack for understanding openstack, especially Quantum ! ;) but when I reboot devstack node, all of openstack compornents was not booted. That is not good for me. and I wanted to use Ubuntu Cloud Archive packages or Ubuntu Package with 12.10.
You need 1 or more node(s) with Ubuntu Server 12.04 LTS / 12.10.
You should have a machine with 3 NICs. eth0 is public network interface. eth1 is VM (data) network interface, this will be used for communication to other VMs on other compute nodes. eth2 is completely for management.
Quantum was designed based on 4 networks, public/data/management/api. This script designed based on 3 networks (if you want 4 networks, you can do it with this). public/data/management & api. All of APIs will be listening on management networks interface.
And you need a disk device (such as /dev/sda6) for cinder service.
If you choose nova-network, it is simple. You need 1 NIC only. And you need a disk device (such as /dev/sda6) for cinder service.
management segment 172.16.1.0/24
+---------------------------------------------------------------------------------
|
|
| eth2 172.16.1.11
+------------+
| | eth1
| all in one | vlan/gre seg = 172.24.17.0/24
| | data segment = 172.16.2.0/24
+------------+ 172.16.2.11
| eth0 10.200.8.11
|
|
+---------------------------------------------------------------------------------
| public segment 10.200.8.0/24
|
| 10.200.8.1
+-----------+
| GW Router |-> The Internet
+-----------+
fig.1 all in one with quantum
Please make disk partition such as /dev/sda6. Script make this disk partition to use by Cinder.
Set up network configuration.
% sudo vim /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down
address 10.200.8.16
netmask 255.255.255.0
dns-nameservers 8.8.8.8 8.8.4.4
dns-search cpi.ad.jp
auto eth1
iface eth1 inet static
address 172.16.2.11
netmask 255.255.255.0
auto eth2
iface eth2 inet static
address 172.16.1.11
netmask 255.255.255.0
gateway 172.16.1.1
dns-nameservers 8.8.8.8 8.8.4.4
% sudo /etc/init.d/networking restart
Clone this scripts to your target node.
% git clone https://github.com/jedipunkz/openstack_folsom_deploy.git
% cd openstack_folsom_deploy
Update these environment in deploy_with_quantum.conf
BASE_DIR=`pwd`
HOST_IP='172.16.1.11'
HOST_PUB_IP='10.200.8.11'
MYSQL_PASS='secret'
CINDER_VOLUME='/dev/sda6'
DATA_NIC='eth1'
PUBLIC_NIC='eth0'
NETWORK_TYPE='gre'
INT_NET_GATEWAY='172.24.17.254'
INT_NET_RANGE='172.24.17.0/24'
EXT_NET_GATEWAY='10.200.8.1'
EXT_NET_START='10.200.8.36'
EXT_NET_END='10.200.8.40'
EXT_NET_RANGE='10.200.8.0/24'
OS_IMAGE_URL="https://launchpad.net/cirros/trunk/0.3.0/+download/cirros-0.3.0-x86_64-disk.img"
OS_IMAGE_NAME="Cirros 0.3.0 x86_64"
Run this script.
% sudo ./deploy.sh allinone quantum # wait some minutes...
That's all and You've done :D
Now you can create and boot VMs on Horizon (http://${HOST_IP}/horizon) with user: demo, pass: demo.
management segment 172.16.1.0/24
+--------------------------------------------+------------------+-----------------
| | |
| | |
| eth2 172.16.1.12 | eth2 172.16.1.13 | eth2 172.16.1.11
+------------+ +-----------+ +------------+
| | eth1 ------------------- eth1 | | | |
| network | vlan/gre seg = 172.24.17.0/24 | compute | | controller |
| node | data segment = 172.16.2.0/24 | node | | node |
+------------+ 172.16.2.13 172.16.2.12 +-----------+ +------------+
| eth0 10.200.8.12 | eth0 10.200.8.11
| |
| |
+--------------------------------------------+------------------+-----------------
| public segment 10.200.8.0/24
|
| 10.200.8.1
+-----------+
| GW Router |-> The Internet
+-----------+
fig.2 separated nodes with quantum
Please make disk partition such as /dev/sda6 on Controller node. Script make this disk partition to use by Cinder.
If you have a plan to build separated by function (controller, network, compute nodes), please run deploy.sh with 'controller', 'network', 'compute' option. Parameters of deploy.conf must be same as controller's one.
controller% git clone https://github.com/jedipunkz/openstack_folsom_deploy.git
Update parameters of deploy_with_quantum.conf
BASE_DIR=`pwd`
CONTROLLER_NODE_IP='172.16.1.11'
CONTROLLER_NODE_PUB_IP='10.200.8.11'
NETWORK_NODE_IP='172.16.1.12'
COMPUTE_NODE_IP='172.16.1.13'
DATA_NIC_COMPUTE='eth1'
MYSQL_PASS='secret'
CINDER_VOLUME='/dev/sda6'
DATA_NIC='eth1'
PUBLIC_NIC='eth0'
NETWORK_TYPE='gre'
INT_NET_GATEWAY='172.24.17.254'
INT_NET_RANGE='172.24.17.0/24'
EXT_NET_GATEWAY='10.200.8.1'
EXT_NET_START='10.200.8.36'
EXT_NET_END='10.200.8.40'
EXT_NET_RANGE='10.200.8.0/24'
OS_IMAGE_URL="https://launchpad.net/cirros/trunk/0.3.0/+download/cirros-0.3.0-x86_64-disk.img" OS_IMAGE_NAME="Cirros 0.3.0 x86_64"
copy directory to network node and compute node.
controller% scp -r openstack_folsom_deploy <network_node_ip>:~/
controller% scp -r openstack_folsom_deploy <compute_node_ip>:~/
Set up NICs for each comportnent.
Controller Node's /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.200.8.11
netmask 255.255.255.0
gateway 10.200.8.1
dns-nameservers 8.8.8.8 8.8.4.4
dns-search cpi.ad.jp
auto eth2
iface eth2 inet static
address 172.16.1.11
netmask 255.255.255.0
Network Node's /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down
address 10.200.8.12
netmask 255.255.255.0
#gateway 10.200.8.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 8.8.8.8 8.8.4.4
dns-search cpi.ad.jp
auto eth1
iface eth1 inet static
address 172.16.2.12
netmask 255.255.255.0
auto eth2
iface eth2 inet static
address 172.16.1.12
netmask 255.255.255.0
gateway 172.16.1.1
dns-nameservers 8.8.8.8 8.8.4.4
Compoute Node's /etc/network/interfaces
auto eth1
iface eth1 inet static
address 172.16.2.13
netmask 255.255.255.0
auto eth2
iface eth2 inet static
address 172.16.1.13
netmask 255.255.255.0
gateway 172.16.1.1
dns-nameservers 8.8.8.8 8.8.4.4
Deploy OpenStack for each compornent.
controller% sudo ./deploy.sh controller quantum
network % sudo ./deploy.sh network quantum
compute % sudo ./deploy.sh compute quntum
You've done. Please access http://${CONTROLLER_NODE_PUB_IP}/horizon via your browser with user: demo, pass: demo.
+-----------+
+----------------------------------| GW Router |-> The Internet
|10.200.8.11 +-----------+
|eth0
+------------+
| |
| all in one |
| |
+------------+
fig.3 all in one with nova-network
Please make disk partition such as /dev/sda6. Script make this disk partition to use by Cinder.
Set up your network configurations to use static ip address.
% sudo vim /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.200.8.11
netmask 255.255.255.0
gateway 10.200.8.1
dns-nameservers 8.8.8.8 8.8.4.4
Clone this scripts to your target node.
% git clone https://github.com/jedipunkz/openstack_folsom_deploy.git
% cd openstack_folsom_deploy
Set up parameters of deploy_with_nova-network.conf
BASE_DIR=`pwd`
HOST_IP='10.200.8.11'
MYSQL_PASS='secret'
CINDER_VOLUME='/dev/sda6'
FIXED_RANGE="10.0.0.0/24"
FIXED_START_ADDR="10.0.0.2"
FLOATING_RANGE="10.200.8.28/30"
NETWORK_SIZE="256"
OS_IMAGE_URL="https://launchpad.net/cirros/trunk/0.3.0/+download/cirros-0.3.0-x86_64-disk.img"
OS_IMAGE_NAME="Cirros 0.3.0 x86_64"
Run this script with nova-network option.
% sudo ./deploy.sh allinone nova-network
You've done. Now you can access to Horizon with URL (http://${HOST_IP}/horizon). with user : demo, pass : demo
+-----------+
+---------------+------------------| GW Router |-> The Internet
|10.200.8.11 |10.200.8.12 +-----------+
|eth0 |eth0
+------------+ +------------+
| | | |
| controller | | compute |
| | | |
+------------+ +------------+
fig.4 separated nodes with nova-network
Please make disk partition such as /dev/sda6 on Controller node. Script make this disk partition to use by Cinder.
controller:/etc/network/interfaces
controller% sudo vim /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.200.8.11
netmask 255.255.255.0
gateway 10.200.8.1
dns-nameservers 8.8.8.8 8.8.4.4
compute:/etc/network/interfaces
compute% sudo vim /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.200.8.12
netmask 255.255.255.0
gateway 10.200.8.1
dns-nameservers 8.8.8.8 8.8.4.4
Clone this scripts to your target node.
controller% git clone https://github.com/jedipunkz/openstack_folsom_deploy.git
controller% cd openstack_folsom_deploy
Set up parameters of deploy_with_nova-network.conf.
BASE_DIR=`pwd`
CONTROLLER_NODE_IP='10.200.8.11'
COMPUTE_NODE_IP='10.200.8.12'
MYSQL_PASS='secret'
CINDER_VOLUME='/dev/sda6'
FIXED_RANGE="10.0.0.0/24"
FIXED_START_ADDR="10.0.0.2"
FLOATING_RANGE="10.200.8.28/30"
NETWORK_SIZE="256"
OS_IMAGE_URL="https://launchpad.net/cirros/trunk/0.3.0/+download/cirros-0.3.0-x86_64-disk.img"
OS_IMAGE_NAME="Cirros 0.3.0 x86_64"
Copy these scripts to compute node.
controller% scp -r openstack_folsom_deploy ${COMPUTE_NODE_IP}:~/
Run this scripts with nova-network option.
controller% sudo ./deploy.sh controller nova-network
compute % sudo ./deploy.sh compute nova-network
Now you can access to Horizon with this URL http://${CONTROLLER_NODE_IP}/horizon
VM can get some informations from metadata server on controller node. add a routing table to VM range network like this.
controller% source ~/openstackrc # use admin user
controller% quantum router-list # get route-id
controller% quantum port-list -- --device_id <router_id> --device_owner network:router_gateway # get router I/F addr
controller% route add -net 172.24.17.0/24 gw <route_if_addr>
If you want to use floating ip, do these operation.
% source ~/openstackrc
% quantum net-list
% quantun floatingip-create <ext_net_id>
% quantun floatingip-list
% quantum port-list
% quantum floatingip-associate <floatingip_id> <vm_port_id>
https://github.com/jedipunkz/openstack_folsom_deploy/blob/master/README_parameters.md
- 2012/11/01 : version 0.1 : First Release.
- 2012/11/08 : version 0.2 : Supported VLAN mode of quantum.
- 2012/12/03 : version 0.3 : Supported 3 nodes constitution (controller, network, compute nodes)
- 2012/12/07 : version 0.4 : Fixed a problem that can not access metadata server from VMs.
- 2013/01/09 : version 0.5 : supported nova-network
- 2013/01/17 : version 0.6 : fixed cinder problem. and make you do not need to exec create_network.
- 2013/02/20 : version 0.7 : enabled Public API to Public Network of Quantum
NONE