Jenkinsfile-hardware

#!/usr/bin/env groovy

pipeline {
  agent none
  stages {
    stage('Hardware Test') {

      parallel {

        stage("cubepilot_cubeorange_test") {
          stages {
            stage("build cubepilot_cubeorange_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make cubepilot_cubeorange_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'cubepilot_cubeorange'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'cubepilot_cubeorange_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("cuav_x7pro_test") {
          stages {
            stage("build cuav_x7pro_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make cuav_x7pro_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'cuav_x7pro'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'cuav_x7pro_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v3_test") {
          stages {
            stage("build px4_fmu-v3_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v3_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v3'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v3_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v4_test") {
          stages {
            stage("build px4_fmu-v4_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v4_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v4'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v4_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v4pro_test") {
          stages {
            stage("build px4_fmu-v4pro_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v4pro_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v4pro'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v4pro_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_test") {
          stages {
            stage("build px4_fmu-v5_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v5_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_debug") {
          stages {
            stage("build px4_fmu-v5_debug") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_debug'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_debug'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true' // generic multicopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
                    unstash 'px4_fmu-v5_debug'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_optimized") {
          stages {
            stage("build px4_fmu-v5_optimized") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_optimized'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_optimized'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v5_optimized'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_optimized/px4_fmu-v5_optimized.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_stackcheck") {
          stages {
            stage("build px4_fmu-v5_stackcheck") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_stackcheck'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_stackcheck'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true' // generic multicopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
                    unstash 'px4_fmu-v5_stackcheck'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'        // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

        stage("nxp_fmuk66-v3_test") {
          stages {
            stage("build nxp_fmuk66-v3_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make nxp_fmuk66-v3_test'
                sh 'make sizes'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'nxp_fmuk66-v3'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'nxp_fmuk66-v3_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("configure") {
                  steps {
                    // configure
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                  }
                }
                stage("status") {
                  steps {
                    statusFTDI()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*` || true' // allow failure due to intermittent serial console issues
                  }
                }
                stage("reset") {
                  steps {
                    cleanupFTDI()
                  }
                }
              }
            } // stage test
          }
        }

      } // parallel
    } // stage Hardware Test
  } // stages
  environment {
    CCACHE_DIR = '/tmp/ccache'
    CI = true
  }
  options {
    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
    timeout(time: 120, unit: 'MINUTES')
    skipDefaultCheckout()
  }
}

void statusFTDI() {
  // run logger
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
  // status commands
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "board_adc test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 2; param show CAL_ACC*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2; param show CAL_GYRO*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2; param show SENS_BOARD*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 2; param show CAL_MAG*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dmesg"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener px4io_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gps"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_gps_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output0"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output1"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -r 2"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
  // stop logger
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
}

void cleanupFTDI() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink stop-all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "navigator stop"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman stop"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'

  // wipe sdcard
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "umount /fs/microsd"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mkfatfs /dev/mmcsd0"'

  // drop any uncommited hardfaults
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "hardfault_log rearm"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "hardfault_log reset"'

  // erase mtd
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'

  // disable buzzer and cleanup storage
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_DIRS_MAX 1"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'

  // reboot
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
}