Github: GitHub
This blaster can be 3d printed, accepts Nerf Rival mags and takes 130 sized motors.
- 3d printable
- Can be assembled with or without as few as 2 screws (2 shell options)
- Mechanically simple, no pusher motor required
- Standard 130 size motors
- Single trigger design
- Open souce
- very compact
- Fully automatic firing, around 10 shots per second
Firing video: YouTube
- 2 small screws (Magazine detents)
- 5/64" and 1/16" drill bits
- 2 130 sized motors
- 1 cherry "roller" switch
- 1 small extension spring
- Length of 1.75mm filament to use as pins
- Wire
- Lipo battery
- Battery connectors (I used xt30)
- Soldering iron