Auto commit

jjfalling · Sep 22, 2012 · b3407a2 · b3407a2
1 parent b4d65d0
commit b3407a2
Showing 1 changed file with 23 additions and 25 deletions.
diff --git a/development/ArduPowerStrip.ino b/development/ArduPowerStrip.ino
@@ -342,21 +342,21 @@ void setup() {
 
 
   com[0]=(Command){
-    "HELP", "Prints this. Try HELP <CMD> for more", command_help    };
+    "HELP", "Prints this. Try HELP <CMD> for more", command_help      };
   com[1]=(Command){
-    "INFO", "Shows system information", command_info    };
+    "INFO", "Shows system information", command_info      };
   com[2]=(Command){
-    "STATUS", "Shows the status of a outlet", command_status    };
+    "STATUS", "Shows the status of a outlet", command_status      };
   com[3]=(Command){
-    "ON", "Sets an outlet to on", command_on    };
+    "ON", "Sets an outlet to on", command_on      };
   com[4]=(Command){
-    "OFF", "Sets an outlet to off", command_off    };
+    "OFF", "Sets an outlet to off", command_off      };
   com[5]=(Command){
-    "REBOOT", "Reboots an outlet", command_reboot    };
+    "REBOOT", "Reboots an outlet", command_reboot      };
   com[6]=(Command){
-    "QUIT", "Quits this session gracefully", command_quit    };
+    "QUIT", "Quits this session gracefully", command_quit      };
   com[7]=(Command){
-    "RESET", "Preform a software reset on this device (and resets ALL relays!)", command_reset    };
+    "RESET", "Preform a software reset on this device (and resets ALL relays!)", command_reset      };
   //com[8]=(Command){"SET", "Set system params (maybe?)", command_set};
 
   pinMode(statusLED, OUTPUT);
@@ -400,26 +400,26 @@ void setup() {
 
   // if the resetSwitch is LOW restore password and tcp parameters todefaul values
   if ( digitalRead( defaultPin ) == LOW ) { 
-    
+
     delay(1000);
-    
+
     Serial.println("Default button pressed");
-      
+
     unsigned long previousMillisSensor = 0;
 
     lcdSerial.write(12);                // Clear 
 
     int foovar = 0;
     int resetMessage = 0;
-    
-//    lcdSerial.write(128);               // line 0 pos 0 
-//    lcdSerial.write("Default? press");   // Turn backlight on
-//    lcdSerial.write(148);               // line 1 pos 0
-//    lcdSerial.write("LCD button to");  // Turn backlight on
-    
-    
+
+    //    lcdSerial.write(128);               // line 0 pos 0 
+    //    lcdSerial.write("Default? press");   // Turn backlight on
+    //    lcdSerial.write(148);               // line 1 pos 0
+    //    lcdSerial.write("LCD button to");  // Turn backlight on
+
+
     while(foovar < 200){
-      
+
       unsigned long currentMillis = millis();
 
       // read the current state of the button
@@ -430,17 +430,15 @@ void setup() {
         previousMillisSensor = millis();
 
         if (resetMessage == 0) {
-
           lcdSerial.write(12);                // Clear 
           lcdSerial.write(128);               // line 0 pos 0 
           lcdSerial << rest1;
           lcdSerial.write(148);               // line 1 pos 0
           lcdSerial << rest2;
           resetMessage = 1;
         }
-        
+
         else if  (resetMessage == 1 ) {
-
           lcdSerial.write(12);                // Clear 
           lcdSerial.write(128);               // line 0 pos 0 
           lcdSerial << rest3;
@@ -450,17 +448,16 @@ void setup() {
         }
 
         else if  (resetMessage == 2 ) {
-
           lcdSerial.write(12);                // Clear 
           lcdSerial.write(128);               // line 0 pos 0 
           lcdSerial << rest5;
           lcdSerial.write(148);               // line 1 pos 0
           lcdSerial << rest6;
           resetMessage = 0;
         }
-        
+
       }
-      
+
     }
   }
 
@@ -1428,3 +1425,4 @@ void validatePin(int pin, String args){
 
 
 
+