Skip to content
CGMiner 3.7.2 with GridSeed GC3355 support
Branch: master
Clone or download
Pull request Compare This branch is 7 commits ahead of girnyau:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
ADL_SDK
bitstreams
ccan
compat
lib
m4
.gitignore
01-cgminer.rules
API-README
API.class
API.java
ASIC-README
AUTHORS
COPYING
ChangeLog
FPGA-README
GPU-README
INSTALL
LICENSE
Makefile.am
Makefile.in
NEWS
README
README.md
SCRYPT-README
aclocal.m4
adl.c
adl.h
adl_functions.h
api-example.c
api-example.php
api.c
arg-nonnull.h
bench_block.h
bitforce-firmware-flash.c
c++defs.h
cgminer.c
compat.h
compile
config.guess
config.h.in
config.sub
configure
configure.ac
depcomp
diablo130302.cl
diakgcn121016.cl
driver-avalon.c
driver-avalon.h
driver-bflsc.c
driver-bflsc.h
driver-bitforce.c
driver-bitfury.c
driver-bitfury.h
driver-gridseed.c
driver-gridseed.h
driver-hashfast.c
driver-hashfast.h
driver-icarus.c
driver-klondike.c
driver-knc-spi-fpga.c
driver-modminer.c
driver-opencl.c
driver-opencl.h
elist.h
example.conf
findnonce.c
findnonce.h
fpgautils.c
fpgautils.h
hexdump.c
hf_protocol.h
install-sh
linux-usb-cgminer
logging.c
logging.h
ltmain.sh
miner.h
miner.php
missing
ocl.c
ocl.h
phatk121016.cl
poclbm130302.cl
scrypt.c
scrypt.h
scrypt130511.cl
sha2.c
sha2.h
usbutils.c
usbutils.h
uthash.h
util.c
util.h
warn-on-use.h
windows-build.txt

README.md

cgminer-gc3355

CGMiner 3.72 with GridSeed GC3355 support

./configure --enable-scrypt --enable-gridseed

GC3355-specific options can be specified via --gridseed-options or "gridseed-options" in the configuration file as a comma-separated list of sub-options:

  • baud - miner baud rate (default 115200)
  • freq - a choice of 250/400/450/500/550/600/650/700/750/800/850/900/950/1000
  • pll_r, pll_f, pll_od - fine-grained frequency tuning; see below
  • chips - number of chips per device (default 5)
  • per_chip_stats - print per-chip nonce generations and hardware failures

If pll_r/pll_f/pll_od are specified, freq is ignored, and calculated as follows:

  • Fin = 25
  • Fref = int(Fin / (pll_r + 1))
  • Fvco = int(Fref * (pll_f + 1))
  • Fout = int(Fvco / (1 << pll_od))
  • freq = Fout

This version of cgminer turns off all BTC cores so that power usage is low. On a 5-chip USB miner, power usage is around 10 W. GPUs are also supported.

You can’t perform that action at this time.