RAWv3.0-NewInterface

EvilCrowRF-RAWv2/RAWv3.0-NewInterface/ELECHOUSE_CC1101_SRC_DRV.h

@@ -0,0 +1,194 @@
+/*
+  ELECHOUSE_CC1101.cpp - CC1101 module library
+  Copyright (c) 2010 Michael.
+    Author: Michael, <www.elechouse.com>
+    Version: November 12, 2010
+
+  This library is designed to use CC1101/CC1100 module on Arduino platform.
+  CC1101/CC1100 module is an useful wireless module.Using the functions of the 
+  library, you can easily send and receive data by the CC1101/CC1100 module. 
+  Just have fun!
+  For the details, please refer to the datasheet of CC1100/CC1101.
+----------------------------------------------------------------------------------------------------------------
+cc1101 Driver for RC Switch. Mod by Little Satan. With permission to modify and publish Wilson Shen (ELECHOUSE).
+----------------------------------------------------------------------------------------------------------------
+*/
+#ifndef ELECHOUSE_CC1101_SRC_DRV_h
+#define ELECHOUSE_CC1101_SRC_DRV_h
+
+#include <Arduino.h>
+
+//***************************************CC1101 define**************************************************//
+// CC1101 CONFIG REGSITER
+#define CC1101_IOCFG2       0x00        // GDO2 output pin configuration
+#define CC1101_IOCFG1       0x01        // GDO1 output pin configuration
+#define CC1101_IOCFG0       0x02        // GDO0 output pin configuration
+#define CC1101_FIFOTHR      0x03        // RX FIFO and TX FIFO thresholds
+#define CC1101_SYNC1        0x04        // Sync word, high INT8U
+#define CC1101_SYNC0        0x05        // Sync word, low INT8U
+#define CC1101_PKTLEN       0x06        // Packet length
+#define CC1101_PKTCTRL1     0x07        // Packet automation control
+#define CC1101_PKTCTRL0     0x08        // Packet automation control
+#define CC1101_ADDR         0x09        // Device address
+#define CC1101_CHANNR       0x0A        // Channel number
+#define CC1101_FSCTRL1      0x0B        // Frequency synthesizer control
+#define CC1101_FSCTRL0      0x0C        // Frequency synthesizer control
+#define CC1101_FREQ2        0x0D        // Frequency control word, high INT8U
+#define CC1101_FREQ1        0x0E        // Frequency control word, middle INT8U
+#define CC1101_FREQ0        0x0F        // Frequency control word, low INT8U
+#define CC1101_MDMCFG4      0x10        // Modem configuration
+#define CC1101_MDMCFG3      0x11        // Modem configuration
+#define CC1101_MDMCFG2      0x12        // Modem configuration
+#define CC1101_MDMCFG1      0x13        // Modem configuration
+#define CC1101_MDMCFG0      0x14        // Modem configuration
+#define CC1101_DEVIATN      0x15        // Modem deviation setting
+#define CC1101_MCSM2        0x16        // Main Radio Control State Machine configuration
+#define CC1101_MCSM1        0x17        // Main Radio Control State Machine configuration
+#define CC1101_MCSM0        0x18        // Main Radio Control State Machine configuration
+#define CC1101_FOCCFG       0x19        // Frequency Offset Compensation configuration
+#define CC1101_BSCFG        0x1A        // Bit Synchronization configuration
+#define CC1101_AGCCTRL2     0x1B        // AGC control
+#define CC1101_AGCCTRL1     0x1C        // AGC control
+#define CC1101_AGCCTRL0     0x1D        // AGC control
+#define CC1101_WOREVT1      0x1E        // High INT8U Event 0 timeout
+#define CC1101_WOREVT0      0x1F        // Low INT8U Event 0 timeout
+#define CC1101_WORCTRL      0x20        // Wake On Radio control
+#define CC1101_FREND1       0x21        // Front end RX configuration
+#define CC1101_FREND0       0x22        // Front end TX configuration
+#define CC1101_FSCAL3       0x23        // Frequency synthesizer calibration
+#define CC1101_FSCAL2       0x24        // Frequency synthesizer calibration
+#define CC1101_FSCAL1       0x25        // Frequency synthesizer calibration
+#define CC1101_FSCAL0       0x26        // Frequency synthesizer calibration
+#define CC1101_RCCTRL1      0x27        // RC oscillator configuration
+#define CC1101_RCCTRL0      0x28        // RC oscillator configuration
+#define CC1101_FSTEST       0x29        // Frequency synthesizer calibration control
+#define CC1101_PTEST        0x2A        // Production test
+#define CC1101_AGCTEST      0x2B        // AGC test
+#define CC1101_TEST2        0x2C        // Various test settings
+#define CC1101_TEST1        0x2D        // Various test settings
+#define CC1101_TEST0        0x2E        // Various test settings
+
+//CC1101 Strobe commands
+#define CC1101_SRES         0x30        // Reset chip.
+#define CC1101_SFSTXON      0x31        // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1).
+                                        // If in RX/TX: Go to a wait state where only the synthesizer is
+                                        // running (for quick RX / TX turnaround).
+#define CC1101_SXOFF        0x32        // Turn off crystal oscillator.
+#define CC1101_SCAL         0x33        // Calibrate frequency synthesizer and turn it off
+                                        // (enables quick start).
+#define CC1101_SRX          0x34        // Enable RX. Perform calibration first if coming from IDLE and
+                                        // MCSM0.FS_AUTOCAL=1.
+#define CC1101_STX          0x35        // In IDLE state: Enable TX. Perform calibration first if
+                                        // MCSM0.FS_AUTOCAL=1. If in RX state and CCA is enabled:
+                                        // Only go to TX if channel is clear.
+#define CC1101_SIDLE        0x36        // Exit RX / TX, turn off frequency synthesizer and exit
+                                        // Wake-On-Radio mode if applicable.
+#define CC1101_SAFC         0x37        // Perform AFC adjustment of the frequency synthesizer
+#define CC1101_SWOR         0x38        // Start automatic RX polling sequence (Wake-on-Radio)
+#define CC1101_SPWD         0x39        // Enter power down mode when CSn goes high.
+#define CC1101_SFRX         0x3A        // Flush the RX FIFO buffer.
+#define CC1101_SFTX         0x3B        // Flush the TX FIFO buffer.
+#define CC1101_SWORRST      0x3C        // Reset real time clock.
+#define CC1101_SNOP         0x3D        // No operation. May be used to pad strobe commands to two
+                                        // INT8Us for simpler software.
+//CC1101 STATUS REGSITER
+#define CC1101_PARTNUM      0x30
+#define CC1101_VERSION      0x31
+#define CC1101_FREQEST      0x32
+#define CC1101_LQI          0x33
+#define CC1101_RSSI         0x34
+#define CC1101_MARCSTATE    0x35
+#define CC1101_WORTIME1     0x36
+#define CC1101_WORTIME0     0x37
+#define CC1101_PKTSTATUS    0x38
+#define CC1101_VCO_VC_DAC   0x39
+#define CC1101_TXBYTES      0x3A
+#define CC1101_RXBYTES      0x3B
+
+//CC1101 PATABLE,TXFIFO,RXFIFO
+#define CC1101_PATABLE      0x3E
+#define CC1101_TXFIFO       0x3F
+#define CC1101_RXFIFO       0x3F
+
+//************************************* class **************************************************//
+class ELECHOUSE_CC1101
+{
+private:
+  void SpiStart(void);
+  void SpiEnd(void);
+  void GDO_Set (void);
+  void GDO0_Set (void);
+  void Reset (void);
+  void setSpi(void);
+  void RegConfigSettings(void);
+  void Calibrate(void);
+  void Split_PKTCTRL0(void);
+  void Split_PKTCTRL1(void);
+  void Split_MDMCFG1(void);
+  void Split_MDMCFG2(void);
+  void Split_MDMCFG4(void);
+public:
+  void Init(void);
+  byte SpiReadStatus(byte addr);
+  void setSpiPin(byte sck, byte miso, byte mosi, byte ss);
+  void addSpiPin(byte sck, byte miso, byte mosi, byte ss, byte modul);
+  void setGDO(byte gdo0, byte gdo2);
+  void setGDO0(byte gdo0);
+  void addGDO(byte gdo0, byte gdo2, byte modul);
+  void addGDO0(byte gdo0, byte modul);
+  void setModul(byte modul);
+  void setCCMode(bool s);
+  void setModulation(byte m);
+  void setPA(int p);
+  void setMHZ(float mhz);
+  void setChannel(byte chnl);
+  void setChsp(float f);
+  void setRxBW(float f);
+  void setDRate(float d);
+  void setDeviation(float d);
+  void SetTx(void);
+  void SetRx(void);
+  void SetTx(float mhz);
+  void SetRx(float mhz);
+   int getRssi(void);
+  byte getLqi(void);
+  void setSres(void);
+  void setSidle(void);
+  void goSleep(void);
+  void SendData(byte *txBuffer, byte size);
+  void SendData(char *txchar);
+  void SendData(byte *txBuffer, byte size, int t);
+  void SendData(char *txchar, int t);
+  byte CheckReceiveFlag(void);
+  byte ReceiveData(byte *rxBuffer);
+  bool CheckCRC(void);
+  void SpiStrobe(byte strobe);
+  void SpiWriteReg(byte addr, byte value);
+  void SpiWriteBurstReg(byte addr, byte *buffer, byte num);
+  byte SpiReadReg(byte addr);
+  void SpiReadBurstReg(byte addr, byte *buffer, byte num);
+  void setClb(byte b, byte s, byte e);
+  bool getCC1101(void);
+  byte getMode(void);
+  void setSyncWord(byte sh, byte sl);
+  void setAddr(byte v);
+  void setWhiteData(bool v);
+  void setPktFormat(byte v);
+  void setCrc(bool v);
+  void setLengthConfig(byte v);
+  void setPacketLength(byte v);
+  void setDcFilterOff(bool v);
+  void setManchester(bool v);
+  void setSyncMode(byte v);
+  void setFEC(bool v);
+  void setPRE(byte v);
+  void setPQT(byte v);
+  void setCRC_AF(bool v);
+  void setAppendStatus(bool v);
+  void setAdrChk(byte v);
+  bool CheckRxFifo(int t);
+};
+
+extern ELECHOUSE_CC1101 ELECHOUSE_cc1101;
+
+#endif