v1.5.0

Hardware revision v1.5.

Hardware changes:

• Fix missing connection between console GNDs and Pi GND pins

Software changes:

• Add Nintendo button mappings to the RetCon daemon
• Rebuild the OS image with a newer kernel to support Raspberry Pi Zero W
  • Closes #18

v1.4.0

Hardware revision v1.4.

Hardware changes:

• Replace opto-couplers with transistors, which are cheaper and smaller

Hardware errata:

• Missing connection between console GNDs and Pi GND pins
  • connect pin 3 of P1:Q1 to pin 20 of the Pi pin header
  • connect pin 3 of P1:Q1 to pin 3 of P2:Q8

v1.3.0

Hardware revision v1.3.

Hardware changes:

• Fix placement of DB9 connectors for Sega

v1.2.1

Hardware revision v1.2.

Software changes:

• Boot in read-only mode to extend SD card lifetime
• Add development packages to allow a RetCon image to be used to build RetCon
• Cut the SD card image size to 1/3 its previous size
• Cut boot time in half
• Fix service shutdown problems

Hardware errata:

• DB9 connectors are too far from the edge of the board

v1.2.0

First stable, open-source release. Hardware revision v1.2.

Hardware errata:

• DB9 connectors are too far from the edge of the board