Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
3 contributors

Users who have contributed to this file

@jp112sdl @alexreinert @Borsti84
166 lines (136 sloc) 4.7 KB
//- -----------------------------------------------------------------------------------------------------------------------
// AskSin++
// 2016-10-31 papa Creative Commons - http://creativecommons.org/licenses/by-nc-sa/3.0/de/
//- -----------------------------------------------------------------------------------------------------------------------
// define this to read the device id, serial and device type from bootloader section
// #define USE_OTA_BOOTLOADER
#define EI_NOTEXTERNAL
#include <EnableInterrupt.h>
#include <AskSinPP.h>
#include <LowPower.h>
#include <sensors/Dht.h>
#include <MultiChannelDevice.h>
// we use a Pro Mini
// Arduino pin for the LED
// D5 == PIN 5 on Pro Mini
#define LED_PIN 5
// D4 == PIN 4 on Pro Mini
#define DHT22_PIN 4
// Arduino pin for the config button
// B0 == PIN 8 on Pro Mini
#define CONFIG_BUTTON_PIN 8
//-----------------------------------------------------------------------------------------
//Korrektur von Temperatur und Luftfeuchte
//Einstellbarer OFFSET für Temperatur -> gemessene Temp +/- Offset = Angezeigte Temp.
#define OFFSETtemp 0 //z.B -50 ≙ -5°C / 50 ≙ +5°C
//Einstellbarer OFFSET für Luftfeuchte -> gemessene Luftf. +/- Offset = Angezeigte Luftf.
#define OFFSEThumi 0 //z.B -10 ≙ -10%RF / 10 ≙ +10%RF
//-----------------------------------------------------------------------------------------
// number of available peers per channel
#define PEERS_PER_CHANNEL 6
//seconds between sending messages
#define MSG_INTERVAL 180
// all library classes are placed in the namespace 'as'
using namespace as;
// define all device properties
const struct DeviceInfo PROGMEM devinfo = {
{0x00, 0x3f, 0x10}, // Device ID
"JPTH10I001", // Device Serial
{0x00, 0x3f}, // Device Model
0x10, // Firmware Version
as::DeviceType::THSensor, // Device Type
{0x01, 0x00} // Info Bytes
};
/**
Configure the used hardware
*/
typedef AvrSPI<10, 11, 12, 13> SPIType;
typedef Radio<SPIType, 2> RadioType;
typedef StatusLed<LED_PIN> LedType;
typedef AskSin<LedType, BatterySensor, RadioType> BaseHal;
class Hal : public BaseHal {
public:
void init (const HMID& id) {
BaseHal::init(id);
// measure battery every 1h
battery.init(seconds2ticks(60UL * 60), sysclock);
battery.low(22);
battery.critical(19);
}
bool runready () {
return sysclock.runready() || BaseHal::runready();
}
} hal;
class WeatherEventMsg : public Message {
public:
void init(uint8_t msgcnt, int16_t temp, uint8_t humidity, bool batlow) {
uint8_t t1 = (temp >> 8) & 0x7f;
uint8_t t2 = temp & 0xff;
if ( batlow == true ) {
t1 |= 0x80; // set bat low bit
}
Message::init(0xc, msgcnt, 0x70, (msgcnt % 20 == 1) ? (BIDI | WKMEUP) : BCAST, t1, t2);
pload[0] = humidity;
}
};
class WeatherChannel : public Channel<Hal, List1, EmptyList, List4, PEERS_PER_CHANNEL, List0>, public Alarm {
WeatherEventMsg msg;
int16_t temp;
uint8_t humidity;
uint16_t millis;
Dht<DHT22_PIN, DHT22, 4> dht22;
public:
WeatherChannel () : Channel(), Alarm(5), temp(0), humidity(0), millis(0) {}
virtual ~WeatherChannel () {}
// here we do the measurement
void measure () {
DPRINT("Measure...\n");
if (dht22.measure()) {
DPRINTLN("DHT22 measurement ok.");
} else {
DPRINTLN("DHT22 measurement NOT ok.");
}
humidity = dht22.humidity();
temp = dht22.temperature();
DPRINT("T/H = " + String(temp+OFFSETtemp) + "/" + String(humidity+OFFSEThumi) + "\n");
}
virtual void trigger (__attribute__ ((unused)) AlarmClock& clock) {
uint8_t msgcnt = device().nextcount();
// reactivate for next measure
tick = delay();
clock.add(*this);
measure();
msg.init(msgcnt, temp+OFFSETtemp, humidity+OFFSEThumi, device().battery().low());
device().sendPeerEvent(msg, *this);
}
uint32_t delay () {
return seconds2ticks(MSG_INTERVAL);
}
void setup(Device<Hal, List0>* dev, uint8_t number, uint16_t addr) {
Channel::setup(dev, number, addr);
sysclock.add(*this);
dht22.init();
}
uint8_t status () const {
return 0;
}
uint8_t flags () const {
return 0;
}
};
typedef MultiChannelDevice<Hal, WeatherChannel, 1> WeatherType;
WeatherType sdev(devinfo, 0x20);
ConfigButton<WeatherType> cfgBtn(sdev);
void setup () {
DINIT(57600, ASKSIN_PLUS_PLUS_IDENTIFIER);
sdev.init(hal);
buttonISR(cfgBtn, CONFIG_BUTTON_PIN);
sdev.initDone();
}
void loop() {
bool worked = hal.runready();
bool poll = sdev.pollRadio();
if ( worked == false && poll == false ) {
hal.activity.savePower<Sleep<>>(hal);
}
}
You can’t perform that action at this time.