Personal Infrastructure Setup with Ansible

This repository contains Ansible playbooks to set up a personal MacBook and home server. This README provides instructions on how to customize variables and run the playbooks.

Prerequisites

Install Ansible on your local machine.

python -m pip install ansible

Configuration

Before running the playbook, you need to set the desired variables in group_vars/* files. Also be sure to set up inventory.ini with the correct IP addresses of your hosts.

Running the Playbook

To run the playbooks, execute the following command:

ansible-playbook macbook_playbook.yml
ansible-playbook homeserver_playbook.yml

1. create vault password file .vault_pass.txt
2. to encrypt smth ansible-vault encrypt_string --stdin-name mas_email
3. to decrypt ansible-vault decrypt_string --stdin-name mas_email
4. to run ansible-playbook -i inventory.ini playbook_macbook.yml
5. to run ansible-playbook -i inventory.ini playbook_vps.yml

To lint run yamllint . and ansible-lint

homelab setup

General

Create duckdns [DOMAIN] and [TOKEN]

Backups

Connect disk to the raspberry pi and get uuid (PARTUUID)

sudo blkid

update vars/homelab.yml

Pi initial setup:

1. Install raspbian lite on raspberry pi
   Easy way: use raspberry pi imager
   Fill wi-fi credentials and enable ssh with your ssh key
2. Create ssh config for the homelab with key and homelab announced name
3. Run ansible-playbook -i inventory.ini playbook_homelab.yml to setup homelab

Router setup:

1. Connect raspberry pi to the power (auto network connection)
2. Fix ip address in router settings
   Home Network -> Network -> Network Connections -> Edit homelab -- "Always assign this network device the same IPv4 address"
3. Announce homelab as upstream dns server in router settings Internet -> Account Information -> DNS Server -> Use other DNSv4/DNSv6 Servers
   • Fill both fields with raspberry pi ip address
   • Checkbox fallback to public dns
4. Forward vpn subnet through homelab
   Home Network -> Network -> Network Settings -> IPv4 Addresses -> Network Settings -> IPv4 Routes -> New IPv4 Route
   (same as in vars/all.yml)

   IPv4 Network: 10.1.0.0
   Subnet Mask: 255.255.255.0  (/24)
   Gateway: [homelab fixed ip]
   Ipv4 route active: checked
   

5. Forward ports to homelab
   Internet -> Permit Access -> Port Sharing -> New Port Sharing Rule
   Device: homelab
   New Sharing -> Port Sharing

   Application: Custom
   Service Name: Wireguard
   Protocol: UPD
   Port: 51820
   

router setup

General

Create duckdns [DOMAIN] and [TOKEN]

Generate config files

ansible-playbook -i inventory.ini playbook_router.yml --tags=generate

VPN setup:

1. Setup DynDNS to update on the router Internet -> Permit Access -> DynDNS

   Update URL: https://www.duckdns.org/update?domains=[DOMAIN]&token=[TOKEN]&ip=<ipaddr>&ipv6=<ip6addr>
   Domain Name: [DOMAIN].duckdns.org
   Username: none
   Password: [TOKEN]
   

2. Enable Wireguard on the router
   Internet -> Permit Access -> VPN (WireGuard) -> Enable WireGuard -> Add connection

   Connect networks or establish special connections
   already been set up: yes
   Name: wg0
   

   Load config from .tmp/router-wg0.conf