Tested on Freenove Camera ESP32-S3 WROOM N8R8 (8MB Flash / 8MB PSRAM)
How to use.
- git clone this repository.
- Open with VSCode.
- Change WIFI_NAME, WIFI_PASSWORD in the main.c
- Run
pio run -t menuconfig
->Component Config
->ESP PSRAM, Enable Support for external SPI
then selectSPI RAM config
and select the correct mode for your board. (Octal Mode for Freenove Camera ESP32-S3)
- PIO Upload.
Limitations:
- Supports RTSP via UDP only
Credit:
- Hugo Trippaers - for initial version. https://github.com/spark404/esp32-cam/
- Boris - for Freenove ESP32 S3 board definition for PIO. https://github.com/sivar2311/freenove-esp32-s3-platformio
esp32 camera with h264 support is in the h264 branch