Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

BAStream timed out / UpdateEncryption timed out #93

Closed
johnnysl opened this issue Jul 6, 2016 · 5 comments
Closed

BAStream timed out / UpdateEncryption timed out #93

johnnysl opened this issue Jul 6, 2016 · 5 comments

Comments

@johnnysl
Copy link

johnnysl commented Jul 6, 2016

This is a new one for me. Currently running lede build r904, with the latest wifi driver on top.
HW: WRT1900ACV2.
Had to reboot to fix the issue.

[13686.727011] ieee80211 phy0: cmd 0x9125=BAStream timed out
[13686.732438] ieee80211 phy0: return code: 0x1125
[13686.736987] ieee80211 phy0: timeout: 0x1125
[13686.741197] ieee80211 phy0: destroy ba failed execution
[13824.024087] ieee80211 phy0: cmd 0x9122=UpdateEncryption timed out
[13824.030212] ieee80211 phy0: return code: 0x1122
[13824.034811] ieee80211 phy0: timeout: 0x1122
[13824.039080] ieee80211 phy0: failed execution
[13824.043368] wlan0: failed to remove key (0, c8:f7:33:f2:xx:xx) from hardware                   (-5)
[13828.056010] ieee80211 phy0: cmd 0x9122=UpdateEncryption timed out
[13828.062292] ieee80211 phy0: return code: 0x1122
[13828.066871] ieee80211 phy0: timeout: 0x1122
[13828.071071] ieee80211 phy0: failed execution
[13828.075479] wlan0: failed to remove key (0, 04:f7:e4:d6:xx:xx) from hardware                   (-5)
[13832.083952] ieee80211 phy0: cmd 0x9122=UpdateEncryption timed out
[13832.090395] ieee80211 phy0: return code: 0x1122
[13832.094970] ieee80211 phy0: timeout: 0x1122
[13832.099282] ieee80211 phy0: failed execution
[13832.103670] wlan0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware                   (-5)
[13836.113842] ieee80211 phy0: cmd 0x9122=UpdateEncryption timed out
[13836.120101] ieee80211 phy0: return code: 0x1122
[13836.124665] ieee80211 phy0: timeout: 0x1122
[13836.128864] ieee80211 phy0: failed execution
[13836.133202] wlan0: failed to set key (2, ff:ff:ff:ff:ff:ff) to hardware (-5)
[13840.141766] ieee80211 phy0: cmd 0x9122=UpdateEncryption timed out
[13840.147898] ieee80211 phy0: return code: 0x1122
[13840.152447] ieee80211 phy0: timeout: 0x1122
[13840.156826] ieee80211 phy0: failed execution
[13840.161318] wlan0: failed to remove key (0, 50:2e:5c:32:xx:xx) from hardware                   (-5)
[13844.173664] ieee80211 phy0: cmd 0x9111=SetNewStation timed out
[13844.179525] ieee80211 phy0: return code: 0x1111
[13844.184087] ieee80211 phy0: timeout: 0x1111
[13844.188426] ieee80211 phy0: failed execution
[13848.193580] ieee80211 phy0: cmd 0x9111=SetNewStation timed out
[13848.199442] ieee80211 phy0: return code: 0x1111
[13848.204005] ieee80211 phy0: timeout: 0x1111
[13848.208205] ieee80211 phy0: failed execution
[13852.213503] ieee80211 phy0: cmd 0x9111=SetNewStation timed out
[13852.219366] ieee80211 phy0: return code: 0x1111
[13852.223930] ieee80211 phy0: timeout: 0x1111
[13852.228130] ieee80211 phy0: failed execution
[13856.233416] ieee80211 phy0: cmd 0x8050=broadcast_ssid_enable timed out
[13856.239976] ieee80211 phy0: return code: 0x0050
[13856.244544] ieee80211 phy0: timeout: 0x0050
[13856.248743] ieee80211 phy0: failed execution
[13860.255331] ieee80211 phy0: cmd 0x8127=SetInformationElements timed out
[13860.261979] ieee80211 phy0: return code: 0x0127
[13860.266541] ieee80211 phy0: timeout: 0x0127
[13860.270741] ieee80211 phy0: failed execution
[13864.275249] ieee80211 phy0: cmd 0x801c=80211RadioControl timed out
[13864.281459] ieee80211 phy0: return code: 0x001c
[13864.286017] ieee80211 phy0: timeout: 0x001c
[13864.290217] ieee80211 phy0: failed execution
[13868.295158] ieee80211 phy0: cmd 0x8126=SetFixedRate timed out
[13868.300930] ieee80211 phy0: return code: 0x0126
[13868.305488] ieee80211 phy0: timeout: 0x0126
[13868.309687] ieee80211 phy0: failed execution
cat /sys/kernel/debug/ieee80211/phy0/mwlwifi/ampdu

stream: 0
idx: 0
state: 0
stream: 1
idx: 0
state: 0
stream: 2
idx: 0
state: 0
stream: 3
idx: 0
state: 0

cat /sys/kernel/debug/ieee80211/phy0/mwlwifi/info

driver name: mwlwifi
chip type: 88W8864
hw version: 7
driver version: 10.3.0.17-20160617
firmware version: 0x07020902
mac address: 00:25:9c:13:XX:XX
2g: disable
5g: enable
antenna: 4 4
irq number: 104
iobase0: e1080000
iobase1: e1200000
tx limit: 768
rx limit: 64
ap macid support: 0000ffff
sta macid support: 00010000
macid used: 00000000
qe trigger number: 683254
cat /tmp/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=NL
ieee80211d=1
ieee80211h=1
hw_mode=a
require_ht=1
channel=128


ieee80211n=1
ht_coex=0
ht_capab=[HT40-][LDPC][SHORT-GI-20][SHORT-GI-40]
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=122
ieee80211ac=1
vht_capab=[RXLDPC][SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][MAX-A-MPDU-LEN-EXP7]

interface=wlan0
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=XXXXXXXXX
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=XXXXXXXX
bridge=br-lan
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
bssid=c2:56:27:b8:xx:xx
@jklap
Copy link

jklap commented Jul 6, 2016

I'm also seeing the same issue. Also seems like a reboot is the only resolution.

I'm running the June 8th-ish release.

V1 hardware, OpenWrt custom build from HEAD at that time.

@johnnysl
Copy link
Author

johnnysl commented Jul 8, 2016

I'm seeing these issues on a daily basis currently, with various clients.
As the same driver was stable with and earlier build of LEDE, i'm returning to that build.

@jukkapirinen
Copy link

I have also seen this once. I'm at LEDE r484 and driver was 10.3.0.17-20160608.
But didn't need a reboot.

Sun Jul  3 20:11:22 2016 kern.err kernel: [336084.040860] ieee80211 phy1: cmd 0x9125=BAStream timed out
Sun Jul  3 20:11:22 2016 kern.err kernel: [336084.046373] ieee80211 phy1: return code: 0x1125
Sun Jul  3 20:11:22 2016 kern.err kernel: [336084.051020] ieee80211 phy1: timeout: 0x1125
Sun Jul  3 20:11:22 2016 kern.err kernel: [336084.055307] ieee80211 phy1: check ba failed execution

@jklap
Copy link

jklap commented Jul 8, 2016

What I find curious is that I started running this build Jun 10th... but for the first couple of weeks I did not encounter this issue... but since it first occurred it seems the time between occurrences has been decreasing. For example in the last 24 hours I've had to reboot 3 (correction: now 4) times... in the 3 days previously to that, twice, in the week previous to that, twice.

It seems, but could be just coincidence, that it seems to occur around times of streaming video.

@yuhhaurlin
Copy link
Collaborator

This is the same issue as issue #55. I will close this duplicate one.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

4 participants