evmapy is an evdev event mapper written in Python. This mumbo-jumbo translates into English as "an application for the Linux operating system capable of performing arbitrary actions upon detecting certain input events".
In layman's terms, this piece of software enables you to make your system think you pressed a button on the keyboard when you move an analog stick on your joypad or run a program of your choosing when you hold your computer's power button.
- Linux kernel with evdev and uinput support (virtually all kernels packaged for modern Linux distributions have it)
- Python 3.3+
- python-evdev
- Works with any evdev-compatible input device, from a power button to a 6-axis joypad
- Automatic input device configuration generation
- Dynamic configuration switching
- Adding and removing devices on-the-fly
- Runs in foreground or as a daemon (using external software like
start-stop-daemon) - Supported events:
- key/button presses
- absolute events (e.g. analog stick movements)
- Supported actions:
- key press injection
- external program execution
- Supported action triggering modes:
- single event, immediate
- single event, hold
- combined events, immediate
- combined events, hold
- sequence of events, immediate
evmapy is not currently available through PyPI, so you'll need to handle it manually:
pip3 install evdev git clone https://github.com/kempniu/evmapy.git cd evmapy python3 setup.py test
NOTE: Commands for your favorite Linux distribution may be a bit different, e.g. you might have to use pip instead of pip3 etc.
If you get any errors from running the last command (and you're positive you're running Python 3.3+), please let me know.
Now, to play with the package without installing it, invoke it in the following way:
python3 -m evmapy
If you decide to install it in your system, run:
python3 setup.py install
and it will be available simply as evmapy.
# evmapy --list-all /dev/input/event3: Logitech Logitech Cordless RumblePad 2 /dev/input/event2: Video Bus /dev/input/event1: Power Button /dev/input/event0: Power Button # evmapy --generate /dev/input/event3 # vim ~/.evmapy/Logitech.Logitech.Cordless.RumblePad.2.json # evmapy evmapy 1.0 initializing running as user root using configuration directory /root/.evmapy scanning devices... /dev/input/event3: loaded /root/.evmapy/Logitech.Logitech.Cordless.RumblePad.2.json handling 1 device(s)
NOTE: evmapy doesn't need to be run with root privileges as long as the user you're running it as is allowed to read from /dev/input/eventX. However, running it as root for testing purposes is a good way to make sure you're not facing a permissions-related issue.
NOTE: Use python3 -m evmapy instead of evmapy if you haven't installed the package in your system yet.
If all goes well, pressing any button on your input device will cause the default name of that button to be printed to the console.
Configuration is stored in JSON files. You can generate one automatically using the --generate DEVICE command line option (or --generate-minimal DEVICE if you don't want the default actions to be generated). Each configuration file is a representation of an object with the following (mandatory) properties:
- actions: actions to take in response to events; each action has the following properties:
- trigger: value(s) of the name property(-ies) of the event(s) which trigger(s) this action (:min or :max suffix is required for axes),
- type:
- key: event(s) will be translated to a key press,
- exec: event(s) will cause an external program to be executed,
- target:
- if type is key: the key(s) to "press" (see
/usr/include/linux/input.hfor a list of valid values), - if type is exec: the command(s) to run,
- if type is key: the key(s) to "press" (see
- (optional) mode: triggering mode for actions with trigger containing more than one event:
- all (default): trigger will be treated as a combination of events,
- sequence: trigger will be treated as a sequence of events,
- any: trigger will be treated as a list of alternative events, any of which causes the action to be performed,
- (optional) hold: if set to a positive value (which is only allowed when mode is not sequence), this action will only be triggered once sufficient triggers will have been active for the given number of seconds; otherwise, it will be triggered immediately once sufficient triggers are active; this value is a floating point number, i.e. fractions of seconds can be used; defaults to 0 (i.e. immediate triggering),
- grab: if set to true, evmapy will become the only recipient of the events emitted by this input device.
The following properties are only required to be set in the initial configuration file for a device:
axes: list of input device axes, each of which must have all of the following properties assigned:
- name: user-friendly name of this axis,
- code: don't touch it (evmapy relies on it for proper functioning),
- min: lowest possible value of this axis,
- max: highest possible value of this axis,
NOTE: Don't forget that a typical analog stick on a joypad consists of 2 axes (horizontal and vertical)!
buttons: list of input device keys/buttons, each of which must have all of the following properties assigned:
- name: see axes,
- code: see axes.
If all this sounds too complicated, here are some examples to clear things up:
Translate Button 1 presses to ALT+ENTER presses
"actions": [ { "trigger": "Button 1", "type": "key", "target": [ "KEY_LEFTALT", "KEY_ENTER" ] }, ... ], "buttons": [ { "name": "Button 1", "code": 304 }, ... ]Shutdown system when Right analog stick is tilted to the left for 1 second
"actions": [ { "trigger": "Right analog stick (horizontal):min", "hold": 1.0, "type": "exec", "target": "shutdown -h now" }, ... ], "axes": [ { "name": "Right analog stick (horizontal)", "code": 4, "min": 0, "max": 255 }, ... ]Translate SHIFT+Q presses to ESC presses
"actions": [ { "trigger": [ "SHIFT", "Q" ], "type": "key", "target": "KEY_ESC" }, ... ], "buttons": [ { "name": "SHIFT", "code": 42 }, { "name": "Q", "code": 16 }, ... ]Send ALT+CTRL+DEL when you make a circular, clockwise motion with an analog stick
"actions": [ { "trigger": [ "L-R:min", "U-D:min", "L-R:max", "U-D:max" ], "mode": "sequence", "type": "key", "target": [ "KEY_LEFTALT", "KEY_LEFTCTRL", "KEY_DELETE" ] }, ... ], "axes": [ { "name": "L-R", "code": 0, "min": 0, "max": 255 }, { "name": "U-D", "code": 1, "min": 0, "max": 255 }, ... ]Print
yoto all user terminals when either Y or O is pressed"actions": [ { "trigger": [ "Y", "O" ], "mode": "any", "type": "exec", "target": "echo yo | wall" }, ... ], "buttons": [ { "name": "Y", "code": 21 }, { "name": "O", "code": 24 }, ... ]
...change the configuration for a given device?
Use the
--configure DEVICE:FILEcommand line option.FILEhas to exist in~/.evmapy. If you don't specifyFILE, default configuration will be restored forDEVICE.# Load configuration file ~/.evmapy/foo.json for /dev/input/event0 evmapy --configure /dev/input/event0:foo.json # Restore default configuration for /dev/input/event1 evmapy --configure /dev/input/event1:
...rescan available devices?
Send a SIGHUP signal to evmapy.
HINT: You can automatically signal evmapy when a new input device is plugged in using a udev rule similar to the following:
ACTION=="add", KERNEL=="event[0-9]*", RUN+="/usr/bin/pkill -HUP -f evmapy"
...shutdown the application cleanly?
Send a SIGINT signal to it (if it's running in the foreground, CTRL+C will do).
...diagnose why the application doesn't react to events the way I want it to?
If you're expecting evmapy to inject keypresses, make sure the user you're running it as is allowed to write to
/dev/uinput- evmapy warns you upon its startup if it encounters a problem with that. If that's not your case, you can try running evmapy with the--debugcommand line option. This will cause every event received from any handled input device to be logged, along with any actions evmapy is attempting to perform. If you see the events coming, but the actions you expect aren't performed, double-check your configuration first and if this doesn't help, feel free to contact me....run it as a daemon?
I wanted to keep the source code as clean as possible and to avoid depending on third party Python modules which aren't absolutely necessary, so there is no "daemon mode" implementation per se in evmapy. Instead, please use the relevant tools available in your favorite distribution, like
start-stop-daemon:start-stop-daemon --start --background --pidfile /run/evmapy.pid --make-pidfile --exec /usr/bin/evmapy start-stop-daemon --stop --pidfile /run/evmapy.pid --retry INT/5/KILL/5
When running in the background, evmapy will output its messages to syslog (
LOG_DAEMONfacility)....run it as a systemd service?
You can use the following service file as a starting point:
[Unit] Description=evdev event mapper [Service] #User=nobody ExecStart=/usr/bin/evmapy ExecReload=/usr/bin/kill -HUP $MAINPID [Install] WantedBy=multi-user.target
This enables you to initiate a device rescan using
systemctl reload evmapy....run it automatically when my X session starts?
Put the following contents in
/etc/xdg/autostart/evmapy.desktop:[Desktop Entry] Version=1.0 Type=Application Name=evmapy Comment=evdev event mapper Exec=/usr/bin/evmapy
evmapy is a young project and it hasn't been tested widely. While evdev and uinput are powerful mechanisms which put virtually no limits on their applications, evmapy was implemented to solve a specific problem, so you are likely to find it lacking in its current form. Unfortunately, I don't have enough spare time at the moment to turn it into a full-blown project. I decided to publish it nevertheless as it may scratch your itch as well as it did mine and if it doesn't, you are free to modify it for your own needs.
- Strict PEP 8 conformance
- Try not to make Pylint angry
- Document all the things!
- 100% unit test code coverage
A while ago, I felt a sudden urge to play a bunch of old games on a TV, using a wireless joypad. DOSBox and FCEUX themselves worked fine, but for long-forgotten reasons I wasn't entirely happy with their joypad support. The solution I came up with back then was using joy2key to translate joypad actions into key presses as both emulators supported keyboard input out of the box (obviously) and without any glitches. But creating joy2key configuration files and finding correct X window IDs to send events to was a real ordeal.
Fast forward a few years, I started using a joypad to control Kodi, a cross-platform media center solution. While this combo was working great after the application was already launched, it got me thinking: how do I launch Kodi, or any program for that matter, using just the joypad? I haven't found a single solution to that problem, which surprised me as, thanks to evdev, it is trivially easy to receive input events generated by the joypad in user space.
This adversity reminded me of the other joypad issues I had faced in the past and I got frustrated that I can't just easily use the joypad the way I want. That frustration became the motivation for creating evmapy.
evmapy is released under the GPLv2.