config_sram_blackadder2020.dat

40:424f4f54
44:00000000
48:00080000
4c:00000000
50:00001000
54:00000000
58:11000000
5c:00000000
60:1107F000
64:00000000
68:00000021    /* (0x180 - 0x80) / 8 + 1 = 0x21 */

80:ff70fc00    /* setting priority of GPIO for Blackadder, input, output or open drain */
84:00320000    /* GPIO10 are used to fetch watchdog, GPIO 11 & 14 are used for LED */
88:ff70fc04
8c:00000000
90:ff70fc08    /* set the GPIO11 = 0;  GPIO 14 = 1 ; then the value = 0x00020000 */
94:00020000    /* if we want to set GPIO 11 = 1; GPIO 14 = 0; then the value = 0x00100000 */
98:ff702110    1
9c:67000008
a0:ff702000    2
a4:0000003f    
a8:ff702008    3
ac:0040007f
b0:ff702080    4
b4:80014202
b8:ff702084    5
bc:80014202
c0:ff702104    6
c4:00330804    
c8:ff702108    7    /* Change CL to 6 */
cc:6f6b4644
d0:ff70210c    8
d4:0fa890d0
d8:ff702100    9
dc:00020000
e0:ff702114    10
e4:24400010
e8:ff702118    11    /* Mode Register : Change CL to 6 */
ec:00401422
f0:ff70211c    12
f4:00000000
f8:ff702120    13
fc:00000000
100:ff702124    14
104:61800100
108:ff702128    15
10c:deadbeef
110:ff702130    16
114:02800000         /* May be 03000000 which means 6/8 clock */
118:ff702160    17
11c:00220001
120:ff702164    18
124:03402400
128:ff702170    19
12c:89080600
130:ff702174    20
134:8655a608
138:ff702e48    21
13c:0000000d
140:ff702e58    22
144:00010000
148:ff702b28    23
14c:000C0000
150:ff702b2c    24
154:00000000
158:40000001    25
15c:00000100
160:ff702110    26
164:e7000008
168:40000001    27
16c:00000100
170:ff700C08
174:00000000    Configure LAW0 Start Address = 0
178:ff700D70
17c:80F0001E    Configure LAW0 Size = 2G, TRGT is DDR Memory Controller. We will modify the LAW0 at uboot.
180:efefefef