net/ena/base: fix documentation of functions

The documentation format was aligned and few typos were fixed.

Fixes: 99ecfbf ("ena: import communication layer")

Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>

drivers/net/ena/base/ena_com.h

@@ -370,7 +370,7 @@ extern "C" {
  */
 int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);
 
-/* ena_com_set_mmio_read_mode - Enable/disable the mmio reg read mechanism
+/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
  * @ena_dev: ENA communication layer struct
  * @readless_supported: readless mode (enable/disable)
  */
@@ -504,7 +504,7 @@ void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev,
 /* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
  * @ena_dev: ENA communication layer struct
  *
- * This method go over the admin completion queue and wake up all the pending
+ * This method goes over the admin completion queue and wakes up all the pending
  * threads that wait on the commands wait event.
  *
  * @note: Should be called after MSI-X interrupt.
@@ -514,7 +514,7 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
 /* ena_com_aenq_intr_handler - AENQ interrupt handler
  * @ena_dev: ENA communication layer struct
  *
- * This method go over the async event notification queue and call the proper
+ * This method goes over the async event notification queue and calls the proper
  * aenq handler.
  */
 void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data);
@@ -531,14 +531,14 @@ void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);
 /* ena_com_wait_for_abort_completion - Wait for admin commands abort.
  * @ena_dev: ENA communication layer struct
  *
- * This method wait until all the outstanding admin commands will be completed.
+ * This method waits until all the outstanding admin commands are completed.
  */
 void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);
 
 /* ena_com_validate_version - Validate the device parameters
  * @ena_dev: ENA communication layer struct
  *
- * This method validate the device parameters are the same as the saved
+ * This method verifies the device parameters are the same as the saved
  * parameters in ena_dev.
  * This method is useful after device reset, to validate the device mac address
  * and the device offloads are the same as before the reset.
@@ -715,7 +715,7 @@ int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);
  *
  * Retrieve the hash control from the device.
  *
- * @note, If the caller called ena_com_fill_hash_ctrl but didn't flash
+ * @note: If the caller called ena_com_fill_hash_ctrl but didn't flash
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -767,7 +767,7 @@ int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);
  *
  * Retrieve the RSS indirection table from the device.
  *
- * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flash
+ * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -793,14 +793,14 @@ int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev,
 /* ena_com_delete_debug_area - Free the debug area resources.
  * @ena_dev: ENA communication layer struct
  *
- * Free the allocate debug area.
+ * Free the allocated debug area.
  */
 void ena_com_delete_debug_area(struct ena_com_dev *ena_dev);
 
 /* ena_com_delete_host_info - Free the host info resources.
  * @ena_dev: ENA communication layer struct
  *
- * Free the allocate host info.
+ * Free the allocated host info.
  */
 void ena_com_delete_host_info(struct ena_com_dev *ena_dev);
 
@@ -841,9 +841,9 @@ int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
  * @cmd_completion: command completion return value.
  * @cmd_comp_size: command completion size.
 
- * Submit an admin command and then wait until the device will return a
+ * Submit an admin command and then wait until the device returns a
  * completion.
- * The completion will be copyed into cmd_comp.
+ * The completion will be copied into cmd_comp.
  *
  * @return - 0 on success, negative value on failure.
  */
@@ -932,7 +932,7 @@ static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_d
  * @intr_reg: interrupt register to update.
  * @rx_delay_interval: Rx interval in usecs
  * @tx_delay_interval: Tx interval in usecs
- * @unmask: unask enable/disable
+ * @unmask: unmask enable/disable
  *
  * Prepare interrupt update register with the supplied parameters.
  */