-
Notifications
You must be signed in to change notification settings - Fork 4
Home
Alexander edited this page Feb 6, 2023
·
11 revisions
Welcome to the kapl wiki!
Picture | Component name, description | Need | Link |
---|---|---|---|
Pro Micro (18mm wide) Recommended Black MicroUSB |
2 | $8.7 | |
Diodes 1N4148 | 70 | $0.8/100 | |
Cheapest 3-pin switches If you want you can buy expensive branded switches, choose switches with a hole for SMD LEDs (if you need a backlight). |
70 | $15/75 | |
Very cheap switches (alt for prev) If previous switches are still expensive |
70 | $9.4/110 | |
TRRS sockets, PJ320A | 2 | $1.4/10 | |
TRRS Cable 20 cm This my favorite cable, but that any TRS 3-pin audio cable is ok. |
1 | $4.2 | |
TRRS Cable 30 cm (alt for prev) | 1 | $0.69 | |
DIP 3x6x4.3mm tactile button | 2 | $1.3/100 | |
3.5mm pin headers To hotswap Pro Micros. |
2 | $2.9/5 | |
My favorite keycaps Or any set with 68x1u and 2x1.5u keycaps. |
68x1u and 2x1.5u | $75.3 | |
M2 Standoffs 8mm for 1.5mm plate / 7mm for 2.5mm / 6mm for 3mm |
18 | $1.19/20 | |
M2 laptop screws | 36 | $2.2/50 | |
3M bumpons for legs (3mm) | 8+ |
black or clear |
Picture | Component name, description | Need | Link |
---|---|---|---|
SK6812MINI LEDs 3.5x3.5 mm |
88 | $10.9/100 | |
M5 screws for tilting/tenting | 4x30mm + 4x16mm | $4.2/20 | |
M5 locking nuts | 8 | $2/10 | |
Micro USB Cable (2m) Or any ±2m |
1 | $3 |
img | name |
---|---|
The top plate universal and can be used with all bottom plates gerbers/case/top.zip |
|
Bottom plate with cut for leds and Arduino and eth. components gerbers/case/bottom_withLeds_withMKcut.zip |
|
Bottom plate with cut only for leds gerbers/case/bottom_withLeds.zip |
|
Bottom plate with cut only for Arduino and eth. components gerbers/case/bottom_withMKcut.zip |
|
Blank botton plate gerbers/case/top.zip |